Source resolution and risk apportionment to augment the Bubble Policy: Application to a steel plant “bubble”

Source resolution and risk apportionment of emission source categories for risk reduction purposes can be used to enhance the Bubble Policy of the Clean Air Act. This is performed by incorporating receptor modeling techniques of factor analysis and chemical mass balances to assess noncarcinogenic and carcinogenic inhalation risks to a target population for certain pollutants coming from major emission source categories in a steel plant air shed. Source resolution, using factor analysis, statistically interprets a “source” from ambient data. By subsequently quantifying risks from identified metal emission sources using chemical mass balances and risk apportionment, a total additive risk from main source contributors in the steel plant is estimated. From this methodology, the Bubble Policy can be enhanced by targeting only main risk sources or by “risk-trading” with minor impact sources to reduce the total risk (if deemed significant) without arbitrarily reducing risk for all sources in an industrial source complex’s “bubble.”     

Quantification of Extinction Risk: IUCN's System for Classifying Threatened Species

Abstract: The International Union for Conservation of Nature (IUCN) Red List of Threatened Species was increasingly used during the 1980s to assess the conservation status of species for policy and planning purposes. This use stimulated the development of a new set of quantitative criteria for listing species in the categories of threat: critically endangered, endangered, and vulnerable. These criteria, which were intended to be applicable to all species except microorganisms, were part of a broader system for classifying threatened species and were fully implemented by IUCN in 2000. The system and the criteria have been widely used by conservation practitioners and scientists and now underpin one indicator being used to assess the Convention on Biological Diversity 2010 biodiversity target. We describe the process and the technical background to the IUCN Red List system. The criteria refer to fundamental biological processes underlying population decline and extinction. But given major differences between species, the threatening processes affecting them, and the paucity of knowledge relating to most species, the IUCN system had to be both broad and flexible to be applicable to the majority of described species. The system was designed to measure the symptoms of extinction risk, and uses 5 independent criteria relating to aspects of population loss and decline of range size. A species is assigned to a threat category if it meets the quantitative threshold for at least one criterion. The criteria and the accompanying rules and guidelines used by IUCN are intended to increase the consistency, transparency, and validity of its categorization system, but it necessitates some compromises that affect the applicability of the system and the species lists that result. In particular, choices were made over the assessment of uncertainty, poorly known species, depleted species, population decline, restricted ranges, and rarity; all of these affect the way red lists should be viewed and used. Processes related to priority setting and the development of national red lists need to take account of some assumptions in the formulation of the criteria.     

A nexus between environmental literacy,environmental attitude and healthy living

Environmental Science and Pollution Research - It has been widely acknowledged that environmental literacy can provide a strong foundation for future environmental responsiveness, as well as help...     

Blade thickness effect on the aerodynamic performance of an asymmetric NACA six series blade vertical axis wind turbine in low wind speed

ABSTRACT

Vertical axis wind turbine (VAWT) is an economic and widely used energy converter for converting wind energy into useful form of energy, like mechanical and electrical energy. For efficient energy conversion in low wind speed and to have improved power coefficient of asymmetric blade VAWT, selection of optimum blade thickness is needed thus entailing its detailed investigation with respect to different operating wind speed conditions. Present study methodically explores the impact of thickness to chord (t/c) ratio on aerodynamic performance of a three bladed asymmetrical blade H-Darrieus VAWT at different low wind speed conditions by using 2D unsteady CFD simulations. The optimal t/c is obtained on the basis of maximum power coefficient and average moment coefficient of the turbine. The aerodynamic performance curves are obtained at different operating and t/c conditions and the performance insights are corroborated with the findings from the flow physics study to come to some concrete conclusions on the effects of the thickness to chord ratio. The present study identifies large blade curvature to create a large diverging passage on the blade suction surface as the prominent reason for aerodynamic performance drop at a high t/c ratio.     

A grave danger for the Ganges dolphin (Platanista gangetica Roxburgh) in the Subansiri River due to a large hydroelectric project

The Ganges River dolphin (Platanista gangetica Roxburgh) of Subansiri River may be in great danger of extinction due to the construction of the 2,000-MW Lower Subansiri Hydroelectric Project, which started in 2006. A recent survey indicates that there are now 29 Ganges dolphins, up from 21 in 2006. It is feared that drastic changes would occur in the downstream hydrology and ecology of the Subansiri River after the installation of the project, scheduled for 2012. The water discharge during a major part of the day in dry months would come down to a meager 6 cumecs from the present average of 450 cumecs (1 cumec is shorthand for cubic meter per second; also cms, or m³/s (m³s^–1). Riverine mega fauna like the dolphin would be worst hit by this extremely low discharge. Dumping of an extra amount of sediment from different construction phases has already increased sediment load in the Subansiri downstream and degraded some earlier pockets of dolphin up to 20 km below the dam site. There is reason to believe that high sediment influx might have silted up some of the deeper pools downstream, a preferred habitat of dolphins, forcing them to congregate close to the confluence of the Subansiri.     

A novel BiVO4-GO-TiO2-PANI composite for upgraded photocatalytic performance under visible light and its non-toxicity

A novel non-toxic hybrid BiVO₄-GO-TiO₂-polyaniline (PANI) (BVGT-PANI) composite with superior photocatalysis was successfully prepared via a one-pot hydrothermal reaction. The structural and morphological characterizations of the synthesized compounds were analyzed by a series of techniques. We found excellent photocatalytic efficiencies for methylene blue (MB) and phenol degradation under visible light irradiation after adhering the PANI to the photocatalyst. The degradation rates of MB and phenol reach up to approximately 85% and 80%, respectively, after 3 h of irradiation. For photodegradation MB, BVGTA exhibit the highest k_app rate constant of about 1.06?×?10^?2 min^?1, which is about 1.63-fold faster than BVG and 2.94-fold faster than BVGT. For photodegradation of phenol, BVGTA exhibits the highest k_app rate constant, of about 8.86?×?10^?3min^?1, which is about 1.2-fold faster than BVG and 1.96-fold faster than BVGT. Furthermore, vitro toxicity test against Bacillus subtilis and Staphylococcus aureus demonstrated that the nanophotocatalyst is non-toxic.

     

Biosolids application affects the competitive sorption and lability of cadmium,copper, nickel,lead, and zinc in fluvial and calcareous soils

The objective of this research was to investigate the effects of biosolids on the competitive sorption and lability of the sorbed Cd, Cu, Ni, Pb, and Zn in fluvial and calcareous soils. Competitive sorption isotherms were developed, and the lability of these metals was estimated by DTPA extraction following their sorption. Sorption of all metals was higher in the fluvial than in the calcareous soil. Sorption of Cu and Pb was stronger than that of Cd, Ni, and Zn in all soils. Biosolids application (2.5%) reduced the sorption of all metals especially Cu and Pb (28–43%) in both soils (especially the calcareous soil) at the lower added metal concentrations (50 and 100 mg L^?1). However, it increased the sorption of all metals especially Pb and Cu in both soils (especially the calcareous soil; 15.5-fold for Cu) at the higher added concentrations (250 and 300 mg L^?1). Nickel showed the highest lability followed by Cd, Zn, and Pb in both soils. Biosolids increased the lability of the sorbed Ni in the fluvial soils at all added concentrations and the lability of Cd, Pb, and Zn at 50 mg L^?1, but decreased the lability of Cd, Pb, and Zn at 250 and 300 mg L^?1 in both soils. We conclude that at low loading rate (e.g., 50 mg L^?1) biosolids treatment might increase the lability and environmental risk of Cd, Cu, Pb, and Zn. However, at high loading rate (e.g., 300 mg L^?1) biosolids may be used as an immobilizing agent for Cd, Cu, Pb, Zn and mobilizing agent for Ni.