Development and validation of methods for environmental monitoring of cyclophosphamide in workplaces

Methods to monitor contamination of workplaces with antineoplastic drugs have been developed and validated. Cyclophosphamide (CP) was used as a model compound as it is one of the most commonly used antineoplastic drugs. A wipe sampling method to detect contamination with CP at surfaces was developed. A personal air sampling method to sample gas and vapour on solid sorbent tubes and particles with filters was also developed. Wipe and filter samples were extracted and sorbent samples were eluted, all with ethyl acetate. The samples were analysed with liquid chromatography tandem mass spectrometry. (2)H(6)-labelled cyclophosphamide was used as an internal standard. The between-day precision was 2-5% for wipe samples, 4-6% for sorbent samples and 3-8% for filter samples. The limit of detection was 0.02 ng CP per sample for the wipe and filter methods and 0.03 ng CP per sample for the solid sorbent method. Wipe sampling on surfaces made of different materials resulted in mean recoveries between 78-106%. The desorption recovery was between 97-102% for the wipe samples, 97% for the sorbent samples and 101% for the filter samples. Samples were stable for up to 2 months at 5 degrees C and -20 degrees C and for about 2 d at room temperature. The developed methods were applied to the measurement of contamination with CP in a hospital pharmacy. Trace amounts of CP, 1.3 and 1.4 ng, were detected on surfaces in the pharmacy.     

火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜

采用火焰原子吸收分光光度法测定鱼内脏及河流底泥中的铜。鱼内脏经组织捣碎机捣成匀浆后，加硝酸消解；底泥则经氢氟酸和高氯酸消化。该方法具有灵敏度高，精密度和回收率较好等特点。     

强酸型离子交换纤维富集-火焰原子吸收测定水中痕量铜、铅、镉、镍

通过强酸型离子交换纤维柱,在同一水样中同时富集和洗脱了铜、铅、镉、镍,采用火焰原子吸收光谱法测定,并对富集条件及洗脱条件、干扰因素进行了探讨。该方法简便易行,回收率在96.1%~105.5%之间,测定的相对标准偏差小于5.0%。     

基于SADA的最小(大)化超标区布点方法在环境监测中的应用

二次布点是在已有监测数据基础上增加监测点进行监测,决策者常常需要通过结合二次布点和原有监测数据,使插值估算的浓度超标区域最大化或最小化。较详细地介绍了SADA软件最大(小)化超标区域布点法,结合沈阳市区PM10超标区域研究为实例,验证了该方法的显著效果并与随即布点法进行了分析比较。     

粗苯污染事故应急处理

针对一次苯泄漏事故的应急处理过程、方法进行论述与总结，并分析了事故现场周围地表、地下水中苯污染浓度的变化情况，提出了该类事故的应急措施，以此作为处理同类事故的参考和依据。     

水体中重要污染元素化学形态分析研究方法及其进展

概述了元素化学形态分析的意义、概念和范围，元素化学形态分析与模拟计算方法，并分别对某些重要元素的化学形态分析方法的进展作了综述，介绍了１１５篇文献。     

高浓度印染废水处理工程工艺条件与实例分析

研究以三相生物流化床作为工程化反应器处理印染废水的工程工艺条件及操作特性，分别测定流化床内的气相含率，兴体循环速度及体积氧传质系数。     

大顶子山航电枢纽工程建库后上游水质总量控制研究

松花江大顶子山枢纽工程建设后,库区内水体流线及扩散规律的变化将影响库区内水质,受沿江排污影响,其规划目标的水环境容量将发生改变,因此对建库后上游水质总量控制进行研究很有意义.     

三种填料对生活污水中氨氮的去除效果

研究了沙子、砾石、珍珠岩三种填料对生活污水中氨氮（NH3-N）的去除效果。结果表明：沙子对污水中NH3-N的去除效果最好，珍珠岩次之，砾石的去除效果最差。三种填料对生活污水中NH3-N的平均去除率分别为59．6％、20．4％和13．3％。     

浅谈水泥生产中回转窑窑尾SO_2监测

窑尾监测SO_2时,有时会出现其浓度低于仪器最低检出限的情况,应根据窖尾类型、煤中硫含量大小,有无脱硫工艺等情况,认真对比、计算分析,以保证监测数据真实可靠。