Estimating Air Quality in a Traffic Tunnel Using a Forecasting Combination Model

This study performs a field analysis of the diffusion collection rate coefficients of radial geometry passive samplers to measure NO₂ in a Mediterranean coastal area. The study shows that the collection rate coefficients are not constant and depend on certain environmental parameters as well as on the levels of some co-pollutants. A mathematical model, which explains the variation of the collection rate coefficient, has been established.     

Prioritization of water management for sustainability using hydrologic simulation model and multicriteria decision making techniques

The objective of this study is to develop an alternative evaluation index (AEI) in order to determine the priorities of a range of alternatives using both the hydrological simulation program in FORTRAN (HSPF) and multicriteria decision making (MCDM) techniques. In order to formulate the HSPF model, sensitivity analyses of water quantity (peak discharge and total volume) and quality (BOD peak concentrations and total loads) are conducted and a number of critical parameters were selected. To achieve a more precise simulation, the study watershed is divided into four regions for calibration and verification according to landuse, location, slope, and climate data. All evaluation criteria were selected using the Driver–Pressure–State–Impact–Response (DPSIR) model, a sustainability evaluation concept. The Analytic Hierarchy Process is used to estimate the weights of the criteria and the effects of water quantity and quality were quantified by HSPF simulation. In addition, AEIs that reflected residents' preferences for management objectives are proposed in order to induce the stakeholder to participate in the decision making process.     

Monitoring the toxicity of phenolic chemicals to activated sludge using a novel optical scanning respirometer.

This paper reports the development of optical scanning respirometer for determining the toxicity of chemicals to activated sludge. The respirometer is used to measure the dissolved oxygen concentration by monitoring the luminescence intensity of ruthenium dye immobilized in a polymer film in contact with the wastewater sample. The intensity is related to the extent of oxygen quenching of luminescence. The toxicity of chemicals can be evaluated by measuring the inhibition on respiration rate of microorganism using the scanning respirometer. The IC50 values (concentration of a chemical that exhibits 50% respiration inhibition) of various phenolic chemicals in activated sludge were determined. The performance of this method is compared with other toxicity methods. The experimental results indicate that the reproducibility and sensitivity of this respirometer are reasonably good.     

Optimizing biomass pathways to bioenergy and biochar application in electricity generation,biodiesel production,and biohydrogen production

The current energy crisis, depletion of fossil fuels, and global climate change have made it imperative to find alternative sources of energy that are both economically sustainable and environmentally friendly. Here we review various pathways for converting biomass into bioenergy and biochar and their applications in producing electricity, biodiesel, and biohydrogen. Biomass can be converted into biofuels using different methods, including biochemical and thermochemical conversion methods. Determining which approach is best relies on the type of biomass involved, the desired final product, and whether or not it is economically sustainable. Biochemical conversion methods are currently the most widely used for producing biofuels from biomass, accounting for approximately 80% of all biofuels produced worldwide. Ethanol and biodiesel are the most prevalent biofuels produced via biochemical conversion processes. Thermochemical conversion is less used than biochemical conversion, accounting for approximately 20% of biofuels produced worldwide. Bio-oil and syngas, commonly manufactured from wood chips, agricultural waste, and municipal solid waste, are the major biofuels produced by thermochemical conversion. Biofuels produced from biomass have the potential to displace up to 27% of the world's transportation fuel by 2050, which could result in a reduction in greenhouse gas emissions by up to 3.7 billion metric tons per year. Biochar from biomass can yield high biodiesel, ranging from 32.8% to 97.75%, and can also serve as an anode, cathode, and catalyst in microbial fuel cells with a maximum power density of 4346 mW/m². Biochar also plays a role in catalytic methane decomposition and dry methane reforming, with hydrogen conversion rates ranging from 13.4% to 95.7%. Biochar can also increase hydrogen yield by up to 220.3%.

     

Seasonal variation in long-range transported dust to a subtropical islet offshore northern Taiwan: Chemical composition and Sr isotopic evidence in rainwater

We investigated chemical and Sr isotopic composition of monthly rainwater collected on Peng-Chia-Yu (PCY) in northern Taiwan. Rainwater ⁸⁷Sr/⁸⁶Sr ratios, Na/Cl, Ca/Cl, Sr/Cl, Sr/Ca, NH₄/Cl, NO₃/Cl, SO₄/Cl and Na/Sr, showed clear seasonal cycles, reflecting mixture of loess carbonates (high Ca/Sr and more radiogenic ⁸⁷Sr/⁸⁶Sr) and seawater (low Ca/Sr and intermediate ⁸⁷Sr/⁸⁶Sr). Model results showed that the former source contributes up to 45% during the winter monsoon period, but seawater is the dominant Sr source in rainwater (>50%) at other times. Two anomalously low ⁸⁷Sr/⁸⁶Sr values occurred in July and August 1998, coinciding with the Merapi eruption in Indonesia. Air-mass backward trajectories and the geochemical and isotopic compositions in rainwater and Merapi lava (i.e. Ca/Sr = 100 and ⁸⁷Sr/⁸⁶Sr = 0.705400) suggested that the Merapi eruption delivered ash across the western equatorial Pacific to PCY. Aerosols leaching experiments were conducted to examine the impact of the 1998 eruption, demonstrating that only a minor terrestrial signature can be extracted by distilled water, implying rapid dispatch of volcanic gases or high-efficiency dissolution of ash related substance in acidic rains.     

Formation of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) from a refinery process for zinc oxide used in feed additives: a source of dioxin contamination in Chilean pork

The Republic of Korea found dioxin at concentrations exceeding the Korean maximum residue limit (MRL) in pork (2 pg TEQ g⁻¹ fat) imported from Chile in June 2008. Korea and Chile collaborated and investigated to find out the sources of contamination. An isotope dilution method and high resolution gas chromatography/mass spectrometry (HR-GC/MS) were used for the analysis of PCDD/Fs. PCDD/Fs were found from 2.17 to 36.7 pg TEQ g⁻¹ fat from Chilean pork. 2,3,4,7,8-PeCDF, 1,2,3,4,7,8-HxCDF, 1,2,3,6,7,8-HxCDF, and 2,3,4,6,7,8-HxCDF were found as the major congeners in pork samples. 2,3,4,7,8-PeCDF showed the highest concentration and contributed about 30% among the congeners in most of the samples. 2,3,7,8-TCDD, 1,2,3,7,8,9-HxCDD, OCDD, 2,3,7,8-TCDF, 1,2,3,7,8-PeCDF, 1,2,3,7,8,9-HxCDF, and OCDF were not detected or exist at background levels in the less contaminated samples. Remarkably high concentrations of PCDD/Fs were found in samples of zinc oxide (17 147 pg TEQ g⁻¹), zinc oxide based premix (6673 pg TEQ g⁻¹), and the residue crust (800 pg TEQ g⁻¹) in a mixing chamber in the feed mill. From the results of various investigations, this case concluded that zinc oxide in the feed was the major source of the dioxin contamination in pork. The dioxins were formed from a metal refinery process to collect zinc oxide.     

Toxicity of the mosquito control insecticide phenothrin to three life stages of the grass shrimp (Palaemonetes pugio)

Phenothrin is a synthetic pyrethroid used as a contact insecticide in mosquito control programs. This study compared the toxicity of phenothrin to adult, larval and embryonic grass shrimp (Palaemonetes pugio) and examined oxidative stress responses in adult and larval grass shrimp. The adult 24-h LC50 was 0.341 μg/L (95 % confidence intervals 0.282-0.412) and the 96-h LC50 was 0.161 μg/L (95 % CI 0.128-0.203 μg/L). The larval 24-h LC50 was 0.50 μg/L (95 % CI 0.441-0.568) and the 96-h LC50 was 0.154 μg/L (95 % CI 0.139-0.170 μg/L). In the presence of sediment, the 24-h LC50 was 6.30 μg/L (95 % CI 5.00-7.44 μg/L) for adults and 0.771 μg/L (95 % CI 0.630-0.944) for larvae. The sublethal biomarkers glutathione and lipid peroxidase (LPx) were examined after 96-h phenothrin exposure at five concentrations, and there were no statistically significant differences in these levels in adults or larvae compared to controls. There was a significant downward trend in larval LPx levels. This research confirms that phenothrin is highly toxic to grass shrimp and suggests that both adult and larval grass shrimp are appropriate life stages for risk assessments.     

The use of failure mode and effects analysis to construct an effective disposal and prevention mechanism for infectious hospital waste

In recent times, the quality of medical care has been continuously improving in medical institutions wherein patient-centred care has been emphasized. Failure mode and effects analysis (FMEA) has also been promoted as a method of basic risk management and as part of total quality management (TQM) for improving the quality of medical care and preventing mistakes. Therefore, a study was conducted using FMEA to evaluate the potential risk causes in the process of infectious medical waste disposal, devise standard procedures concerning the waste, and propose feasible plans for facilitating the detection of exceptional cases of infectious waste. The analysis revealed the following results regarding medical institutions: (a) FMEA can be used to identify the risk factors of infectious waste disposal. (b) During the infectious waste disposal process, six items were scored over 100 in the assessment of uncontrolled risks: erroneous discarding of infectious waste by patients and their families, erroneous discarding by nursing staff, erroneous discarding by medical staff, cleaning drivers pierced by sharp articles, cleaning staff pierced by sharp articles, and unmarked output units. Therefore, the study concluded that it was necessary to (1) provide education and training about waste classification to the medical staff, patients and their families, nursing staff, and cleaning staff; (2) clarify the signs of caution; and (3) evaluate the failure mode and strengthen the effects.