Distribution of mercury in the combustion products from coal-fired power plants in Guizhou,southwest China

Method 30B and the Ontario Hydro Method (OHM) were used to sample the mercury in the flue gas discharged from the seven power plants in Guizhou Province, southwest China. In order to investigate the mercury migration and transformation during coal combustion and pollution control process, the contents of mercury in coal samples, bottom ash, fly ash, and gypsum were measured. The mercury in the flue gas released into the atmosphere mainly existed in the form of Hg°. The precipitator shows a superior ability to remove Hg^p (particulate mercury) from flue gas. The removal efficiency of Hg²⁺ by wet flue gas desulfurization (WFGD) was significantly higher than that for the other two forms of mercury. The synergistic removal efficiency of mercury by the air pollution control devices (APCDs) installed in the studied power plants is 66.69–97.56%. The Hg mass balance for the tested seven coal-fired power plants varied from 72.87% to 109.67% during the sampling time. After flue gas flowing through APCDs, most of the mercury in coal was enriched in fly ash and gypsum, with only a small portion released into the atmosphere with the flue gas. The maximum discharge source of Hg for power plants was fly ash and gypsum instead of Hg emitted with flue gas through the chimney into the atmosphere. With the continuous upgrading of APCDs, more and more mercury will be enriched in fly ash and gypsum. Extra attention should be paid to the re-release of mercury from the reutilization of by-products from APCDs.

Implications: Method 30B and the Ontario Hydro Method (OHM) were used to test the mercury concentration in the flue gas discharged from seven power plants in Guizhou Province, China. The concentrations of mercury in coal samples, bottom ash, fly ash, and gypsum were also measured. By comparison of the mercury content of different products, we found that the maximum discharge source of Hg for power plants was fly ash and gypsum, instead of Hg emitted with flue gas through the chimney into the atmosphere. With the continuous upgrading of APCDs, more and more mercury will be enriched in fly ash and gypsum. Extra attention should be paid to the re-release of mercury from the reutilization of by-products from APCDs.     

利用有机质发酵产氢的影响因素与应用前景

煤、石油等化石能源的紧缺,使得氢气等可再生能源的开发与利用备受关注.生物制氢技术由于在获得清洁能源氢气的同时,还使得大量有机废弃物得到处理或净化,从而使得该技术成为当前研究的热点.总结了发酵产氢的微生物种类及产氢基质,阐述了不同有机物种类的发酵产氢机理,综述了温度、pH值、金属离子、气相条件及氧化还原电位等生态因子对发酵产氢的影响,并论述了生物制氢技术的发展方向和应用前景.     

鞍山市生态环境遥感评价指标体系

文中应用卫星遥感数据，通过选取合适的评价指标，建立适合本地区的生态环境质量监测与评价指标系统。为开发环境资源和建设生态环境提供管理和决策的依据。     

活性炭固定床电解槽研究

在分析电解槽能耗构成要素及形成原因的基础上 ,本研究开发出活性炭固定床电解槽用于污水处理。本研究以含酚废水为处理对象 ,主要进行了活性炭固定床电解槽与普通电解槽的能耗比较研究。结果表明 ,在相同酚去除率的情况下 ,活性炭固定床电解槽可节省能量 30 %～ 40 % ,具有显著的节能效果     

根据片段常数法估算有机化合物对虹鳟的LC50值

根据 2 58种有机物对虹鳟的 96h半数致死浓度 (LC50 )实测值建立了预测有机物对虹鳟LC50 的片段常数估算模型 .讨论了模型的误差和稳健性 .结果表明 ,有机物的片段常数及结构因子与虹鳟log1 /LC50 之间具有很好的定量关系 .可以根据化合物片段估算其对虹鳟的半数致死浓度 .最终模型的可决系数为 0 94 95,平均误差0 4 2个对数单位 .无论就单一化合物或化合物类别而言 ,模型均具有较高的稳健性     

桂林酸雨中不可溶成份的电镜分析

对广西省桂林市１９８８－０３－１６－１９８８－０３－２９出现的四次系统酸性降水，进行了降水的连续联样和过滤，用电子显微镜观测降水中的不可溶成分，共得到了１２种元素，即Ａｒ，Ｍｇ，Ａｌ，Ｓｉ，Ｐ，Ｓ，Ｃｌ，Ｋ，Ｃａ，Ｆｅ，Ｎｉ和Ｃｒ。用平均值法和聚类法，分析了桂林酸雨中１２种不可溶元素的重量谱特征，以及它们与降水系统之间的关系。     

Simulated seasonal movement of precipitation zone in rainy season over China and its change on CO_2-doubling

In this paper, an investigation of simulated monthly precipitations from April to September is made. Though the precipitations are sometimes overestimated or underestimated, the geographical advance and recession of precipitation zones are well simulated by the UKMO global climate model with a simple mixed-layer ocean. Main characteristics of large-scale precipitation distribution are changed less on CO2-doubling, but the change is significant in some regions. The change in precipitation threatens us while the dry region is imposed by rainfall defect or the wet region by abundant rainfall induced by CO2-doubling.     

藻类－卤虫－对虾系统深度处理含盐含汞化工废水的模拟试验研究

利用藻类－卤虫－对虾系统深度处理含盐含汞化工废水的模拟试验研究表明，该系统对ＢＯＤ５和ＣＯＤ去除率分别达９５．５％和８０．０％，对ＰＯ４＾２－和Ｈｇ＾２＋去除率都在９８％以上。在卤虫密度５２．１个／Ｌ和３６．０个／Ｌ，藻类密度２５７２５．８万个／Ｌ和２０９２４．９万个／Ｌ，水中汞能被不同营养等级的生物累积，在水中汞浓度１．０×１０＾２－７．８×１０＾３和２．１０×１０＾２－１．０４×１０＾４；卤虫     

Use of PFU protozoan community structural and functional characteristics in assessment of water quality in a large, highly polluted freshwater lake in China

Structural and functional parameters of protozoan communities colonizing on PFU (polyurethane foam unit) artificial substrate were assessed as indicators of water quality in the Chaohu Lake, a large, shallow and highly polluted freshwater lake in China. Protozoan communities were sampled 1, 3, 6, 9 and 14 days after exposure of PFU artificial substrate in the lake during October 2003. Four study stations with the different water quality gradient changes along the lake were distinguishable in terms of differences in the community's structural (species richness, individual abundance, etc.) and functional parameters (protozoan colonization rates on PFU). The concentrations of TP, TN, COD and BOD as the main chemical indicators of pollution at the four sampling sites were also obtained each year during 2002-2003 for comparison with biological parameters. The results showed that the species richness and PFU colonization rate decreased as pollution intensity increased and that the Margalef diversity index values calculated at four sampling sites also related to water quality. The three functional parameters based on the PFU colonization process, that is, S(eq), G and T90%, were strongly related to the pollution status of the water. The number of protozoan species colonizing on PFU after exposure of 1 to 3 days was found to give a clear comparative indication of the water quality at the four sampling stations. The research provides further evidence that the protozoan community may be utilized effectively in the assessment of water quality and that the PFU method furnishes rapid, cost-effective and reliable information that may be useful for measuring responses to pollution stress in aquatic ecosystems.     

Ag_6P_2W_(18)O_(62)/TiO_2/膨胀石墨复合光催化剂的制备及甲基橙的降解

以钛酸四丁酯为钛源、膨胀石墨(EG)为载体,通过溶胶凝胶-浸渍法制备了Ag_6P_2W_(18)O_(62)/TiO_2/EG复合光催化剂。采用SEM,EDS,XRD,FTIR,UV-vis等技术对其进行表征,研究了该催化剂在紫外光及可见光下对甲基橙的降解性能。表征结果显示:Ag_6P_2W_(18)O_(62)被成功负载到TiO_2上且保持Dawson结构;经Ag_6P_2W_(18)O_(62)表面修饰后的复合光催化剂可见光吸收性能增强;EG提供的丰富孔道有利于有机污染物吸附去除。实验结果表明:在甲基橙质量浓度为20 mg/L、催化剂加入量为1.0 g/L、反应温度为25℃的条件下,n(Ag)∶n(Ti)=1∶16时的复合光催化剂(ATE-2)的紫外光、可见光催化活性最佳;紫外光下反应70 min时甲基橙去除率为96.5%,可见光下反应40 h时甲基橙去除率为83.5%;ATE-2使用5次后,反应70 min时,其甲基橙去除率仍为92.5%。