Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes

Aiming to determine the plutonium amount as well as its isotopic composition, in particular, in swipe samples for safeguards purposes, an analytical method was developed with a plutonium separation step based on extraction chromatography using 2 cm TEVA columns and detection with quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with membrane desolvation system. The method was successfully applied to New Brunswick plutonium certified reference materials as well as to Lawrence Livermore National Laboratory round robin samples, based on the round robin samples provided by the Institute for Reference Materials and Measurements (Belgium), as part of the Regular European Interlaboratory Measurement Evaluation Programme (REIMEP), campaign 16 (isotopic abundances of plutonium in plutonium nitrate samples), with a total plutonium amount between 1 and 0.25 ng per sample. After the introduction of an additional separation step, it was also possible to carry out precise and accurate total plutonium, (240)Pu/(239)Pu, (241)Pu/(239)Pu and (242)Pu/(239)Pu atom ratios determination in sediment sample showing its applicability to environmental samples in general, reaching a detection limit equivalent to 5 mBq(239)Pu kg(-1).     

Females’ sampling strategy to comparatively evaluate prospective mates in the peacock blenny <Emphasis Type="Italic">Salaria pavo</Emphasis>

Emerging evidence suggests the occurrence of comparative decision-making processes in mate choice, questioning the traditional idea of female choice based on rules of absolute preference. In such a scenario, females are expected to use a typical best-of-n sampling strategy, being able to recall previous sampled males based on memory of their quality and location. Accordingly, the quality of preferred mate is expected to be unrelated to both the number and the sequence of female visits. We found support for these predictions in the peacock blenny, Salaria pavo, a fish where females have the opportunity to evaluate the attractiveness of many males in a short time period and in a restricted spatial range. Indeed, even considering the variability in preference among females, most of them returned to previous sampled males for further evaluations; thus, the preferred male did not represent the last one in the sequence of visited males. Moreover, there was no relationship between the attractiveness of the preferred male and the number of further visits assigned to the other males. Our results suggest the occurrence of a best-of-n mate sampling strategy in the peacock blenny.     

Sustainable consumption in Brazil: Identification of preliminary requirements to guide product development and the definition of public policies

Sustainable product development is closely related to sustainable consumption. The understanding of consumers' purchase, use and discard behaviours may facilitate the identification of requirements to guide manufacturers in the development of sustainable goods and services. The aim of this paper is to investigate consumers' perception about factors that motivate or discourage the consumption of sustainable products to identify demands and convert them into requirements. South Brazilian green and traditional consumers were asked to complete an exploratory qualitative questionnaire. Their answers were organized and compared to identify differences and similarities between the demands of these two groups. Furthermore, demands were converted into requirements for packages, products, manufactures, stores planning and discard systems. The interpretation of factors that motivate or discourage the purchase of sustainable products given by interviewees led to the creation of a list of possible public policies or programmes, aiming to support sustainable consumption. The results demonstrate the necessity of further quantitative investigation between consumer groups, for validation purposes.     

Evaluation of toxic metal (Hg, Cd, Pb), polychlorinated biphenyl (PCBs), and pesticide (DDTs) levels in aromatic herbs collected in selected areas of Southern Italy

This study provides, for the first time, data regarding levels of toxic metals (Hg, Cd, and Pb) and organochlorine compounds (PCBs and DDTs) in various aromatic herbs as rosemary (Rosmarinus officinalis), sage (Salvia officinalis), laurel (Laurus nobilis), oregano (Origanum vulgare), and spearmint (Mentha viridis) collected in some towns of the Southern Italy with different anthropogenic and population pressure. Metal and organochlorine compound concentrations were determined using atomic absorption spectrophotometer and gas-chromatography mass spectrometer (GC/MS), respectively. Pb emerged as the most abundant element, followed by Cd and Hg, while between organochlorine compounds, PCB concentrations were higher than those of DDTs. The pollutant concentrations were found to vary depending on the different herbs. The highest Pb levels were observed in rosemary (1.66 μg g^?1 dry weight) and sage (1.41 μg g^?1 dry weight), this latter showing also the highest Cd concentrations (0.75 μg g^?1 dry weight). For PCBs, the major concentrations were found in rosemary (2.75 ng g^?1 dry weight) and oregano (2.39 ng g^?1 dry weight). The principal component analysis applied in order to evaluate possible similarities and/or differences in the contamination levels among sampling sites indicated differences area-specific contamination.     

Diets of fan shells (Pinna nobilis) of different sizes: fatty acid profiling of digestive gland and adductor muscle

Pinna nobilis is a large bivalve, endemic to the Mediterranean Sea that was shown in a previous study to ingest significantly different proportions of different food items according to its shell height. Fatty acid profiling of total lipids was used to examine these differences in diet in relation to shell size. Small (shell height 23.0 ± 3.3 cm), medium (SH 41.5 ± 5.5 cm) and large (SH 62.7 ± 4.8 cm) P. nobilis were collected from Mali Ston Bay, Adriatic Sea, in March 2010, and fatty acid analysis was performed on digestive gland and adductor muscle tissues. Based on the analysis of the digestive gland, small P. nobilis were associated with a detrital food chain, characterized by saturated and branched-chain fatty acids, while the diets of medium and large individuals had a greater proportion of polyunsaturated fatty acids. This likely reflects the fact that smaller individuals feed within the benthic boundary layer where the detritus concentrations are high. Fatty acid incorporation into the adductor muscle, likely representative of food taken up over a longer time period, was reversed, that is, larger individuals had lower levels of polyunsaturated fatty acids. This most probably reflects energy expenditure, which typically increases with increasing organism size.     

Impact of temperature and species interaction on filamentous cyanobacteria may be more important than salinity and increased pCO2 levels

A future business-as-usual scenario (A1FI) was tested on two bloom-forming cyanobacteria of the Baltic Proper, Nodularia spumigena and Aphanizomenon sp., growing separately and together. The projected scenario was tested in two laboratory experiments where (a) interactive effects of increased temperature and decreased salinity and (b) interactive effects of increased temperature and elevated levels of pCO₂ were tested. Increased temperature, from 12 to 16 °C, had a positive effect on the biovolume and photosynthetic activity (F _v/F _m) of both species. Compared when growing separately, the biovolume of each species was lower when grown together. Decreased salinity, from 7 to 4, and elevated levels of pCO₂, from 380 to 960 ppm, had no effect on the biovolume, but on F _v/F _m of N. spumigena with higher F _v/F _m in salinity 7. Our results suggest that the projected A1FI scenario might be beneficial for the two species dominating the extensive summer blooms in the Baltic Proper. However, our results further stress the importance of studying interactions between species.     

Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed.Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria.In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.     

Nutrient release from bisulfate-amended phytase-diet poultry litter under simulated weathering conditions

Poultry litter generated on the Delmarva Peninsula is from phytase-modified bird diet and bisulfate amendment. To establish agronomic application rates in conservation tillage systems, bisulfate-amended phytase-diet poultry litter was investigated for its nutrient release kinetics and supply capacity under simulated weathering conditions. Delmarva poultry litter was packed in PVC columns (15 cm i.d. × 25 cm height) to a depth of 5 cm and leached intermittently with 600 mm of water for 190 days. Concentrations of various nutrients in leachate were analyzed and nutrient release kinetics were modelled. Poultry litter leachate contained high contents of dissolved organic carbon (DOC, 35–11,800 mg L^?1), nitrogen (N 6–2690 mg L^?1), phosphorus (P 45–225 mg L^?1), potassium (K 20–6060 mg L^?1), and other nutrients. Release of the nutrients occurred primarily in the starting 5 weeks and mostly followed a first order Exponential-Rise-to-Maximum model. Under the specified conditions, the poultry litter demonstrated a nutrient supply capacity of 11.7 kg N Mg^?1, 5.4 kg P Mg^?1, and 36.8 kg K Mg^?1. Release of the potentially plant-available N and K was nearly finalized within 190 days of leaching/weathering, but it would require two years for full release of the leachable P. The results indicate that with consideration of field conditions, surface application of bisulfate-amended phytase-diet Delmarva poultry litter at recommended 6.6 Mg ha^?1 to conservation tillage systems would largely provide P 25.0 kg ha^?1, N 106.6 kg ha^?1, and K 245.5 kg ha^?1 to seasonal crops.     

Solid waste characterization,quantification and management practices in developing countries. A case study: Nablus district – Palestine

Solid waste management (SWM) is one of the most challenging issues faced by developing countries that suffer from serious pollution problems caused by the generation of large waste quantities. This paper presents the case study of SWM in the Nablus district – Palestine. Surveys for household residents' and SWM program operators, field investigations, on-site waste measurements and characterizations were conducted. Per capita waste generation rates varied between different localities although trends were similar. Overall, the majority of waste was organic (65.1% by weight), suggesting a strong resource recovery potential in terms of animal feed or compost. Recyclable waste (plastic, paper and card) made up 16.7% by weight the waste composition suggesting an incentive to introduce source separation. Household attitudes complemented the waste characterization study, revealing the main problems faced. SWM operators quoted on the current status, highlighting problems with disposing in unsanitary landfills, ineffective solid waste fees system, increasing solid waste quantities and lacking equipment and experienced personnel. To enhance sustainable SWM, public awareness, funding, expertise, equipment and facilities and other provisions currently lacking or inappropriate must be provided.