Monitoring and modelling of indoor radon concentrations in a multi-storey building at Mumbai,India

Radon (Rn(222)) levels in an indoor atmosphere of a multi-storey building at Mumbai have been measured for one year covering all the four seasons. Monitoring was carried out using the time-integrated passive detector technique, using Kodak-115 type Solid State Nuclear Track Detector (SSNTD) films of 2.5x2.5 cm size. Measured indoor radon levels showed a decreasing trend with height with concentration ranging from 41 Bq m(-3) at ground floor level to 15 Bq m(-3) at 19th floor level. Using the dose conversion factors, the inhalation dose due to breathing of radon gas is estimated to be 1.03 mSv y(-1) at the ground floor to 0.38 mSv y(-1) at the 19th floor level. Measured indoor radon concentrations on each floor were compared with the computed values using a mathematical model. The agreement between measured values and calculated values of indoor concentrations at different floors was very good within the limitations of various field parameter values.     

Profenofos residues in wild fish from cotton-growing areas of New South Wales, Australia

The organophosphorus (OP) pesticide profenofos (O-4-bromo-2-chlorophenyl O-ethyl S-propyl phosphorothioate) is used heavily in cotton-growing areas of eastern Australia toward the end of the growing season. European carp (Cyprinus carpio), bony bream (Nematalosa erebi), and mosquitofish (Gambusia holbrooki) were collected from the cotton-growing areas around Wee Waa, New South Wales, to determine the relationship between profenofos residues and acetyl-cholinesterase (AChE) activity in wild fish. Profenofos concentrations in water, sediment, and fish tissue reflected its general level of use; levels in March 1994 were significantly higher than in 1993 and generally decreased in May, 6 wk after cessation of spraying. Residues in carp and bony bream generally correlated with concentrations in water and sediment, although residues in fish tend to persist longer at some sites. Acetylcholinesterase inhibition was a useful indicator of profenofos exposure within a season, particularly if linked with residue measurements. Bony bream and gravid female mosquitofish recovered AChE levels more slowly than carp or nongravid mosquitofish. Recovery in creeks was generally more rapid than in lagoons.     

Entrainment mortality of Ichthyoplankton: Detectability and precision of estimates

The ability to detect and to develop a precise and accurate estimate of the entrainment mortality fraction is an important step in projecting power plant impacts on future fish population levels. Recent work indicates that these mortailities may be considerably less than 100% for some fish species in the early life stages. Point estimates of the entrainment mortality fraction have been developed based on probabilistic arguments, but the precision of these estimates has not been studied beyond the simple statistical test of the null hypothesis that no entrainment mortaility exists.The ability to detect entrainment mortality is explored as a function of the sample sizes (numbers of organisms collected) at the intake and discharge sampling stations of a power plant and of the proportion of organisms found alive in the intake samples (intake survival). Minimum detectable entrainment mortality, confidence interval width, and type II error (probability of accepting the null hypothesis of no entrainment mortality when there is mortality) are considered. Increasing sample size and/or decreasing sampling mortality will decrease the minimum detectable entrainment mortality, confidence interval width, and type II error for a given level of type I error.The results of this study are considered in the context of designing useful monitoring programs for determining the entrainment mortality fraction. Preliminary estimates of intake survival and the entrainment mortality fraction can be used to obtain estimates of the sample size needed for a specified level of confidence interval width or type II error. Final estimates of the intake survival and the entrainment mortality fraction can be used to determine the minimum detectable entrainment mortality and the type II error.     

Air quality assessment along Dhanbad - Jharia road

Road ambient air pollution status along Dhanbad – Jharia road isstudied and presented in this article. The selection of this areais made considering the importance of the road in Dhanbad district and the nature of activities taking place along the road, which reflect that the portion of road upto Dhansar can be considered as having commercial areas on both sides and that from Dhansar to Jharia as having industrial areas on both sides.For the assessment of the ambient air quality along the road monitoring is done at the following five locations: Indian Schoolof Mines (ISM), main gate; Bankmore; Dhansar police check post; Dhansar opencast project agent office and a residential house beside the Rajapur opencast project. The location of ISM, maingate is specially chosen as this represents a commercial shoppingcomplexes and the situation can be compared with that at Bankmore. Monitoring of ambient air quality is done following thestandard procedure prescribed in IS: 5182. In addition the concentration of lead, zinc, copper, iron, manganese, cadmium metals in SPM is also monitored. The ambient air quality is monitored in the months of September and November 1999, respectively, to represent monsoon and winter seasons. The SPM concentration observed at all the five locations in the winterseason is more than the permissible limits for commercial andindustrial areas. However, in the monsoon season, the SPM concentration is higher than the permissible limit at the twocommercial locations, i.e., ISM gate and Bankmore, while it isless than the prescribed limit for industrial areas at the remaining three locations. At the ISM gate and Bankmore the SPM generation is mainly by vehicular traffic while at other three locations it was in addition due to mining and other activities.     

A comparative study on characterization of textile wastewaters (untreated and treated) toxicity by chemical and biological tests

Toxicity of textile wastewaters (untreated and treated) and their ingredient chemicals was quantified in terms of their chemical characteristics, fish (Gambusia affinis) mortality and end point growth responses of duckweed (Lemna aequinoctialis) in short-term bioassays. Other parameters of fish bioassay were erythrocyte morphology and its counts. Despite of a definite correlation between data of biological tests (LC/EC(50) values) with that of chemical tests, biological tests were found to be relatively more sensitive to both wastewaters and ingredient chemicals. Amongst all the examined parameters of test organisms, fish RBCs (morphology and counts) sensitivity to pollutants in the wastewaters was usually maximum and therefore, their study should be included in the routine fish bioassay. Other advantage of biological test such as on Lemna is even detection of eutrophic potential of wastewaters, as noted at their higher dilutions. The ingredient chemicals (major) contributing maximum toxicity to textile dye wastewater were, acids (HCl and H(2)SO(4)), alkali (Na(2)O SiO(2)), salt (NaNO(2)) and heavy metal (Cu), whereas dyes (4) were relatively less toxic.     

Measurement of particulate phase polycyclic aromatic hydrocarbon (PAHs) around a petroleum refinery

A study on concentrations of ambient particulates viz. total suspended particulate matters (TSP), respirable suspended particulate matter (RSPM) and polycyclic aromatic hydrocarbons (PAH) were carried out at six sites around the Asia’s largest, 12 MMTPA, petroleum refinery in west coast of India. PAH concentrations are correlated with each other in these sites, suggesting that they have related sources and sinks. The present article discusses the monitoring aspects such as sample collection, pretreatment and analytical methods and compares the monitored levels for assessing the source receptor distribution pattern. The main sources of RSPM and PAHs in urban air are automobile exhaust (CPCB, Polycyclic aromatic hydrocarbons (PAHs) in air and their effects on human health. “”, 2003; Manuel et al., Environmental Science and Technology, 13: 227–231, 2004) and industrial emissions like petroleum refinery (Vo-Dinh, Chemical analysis of polycyclic aromatic hydrocarbons, Wiley: New York, 1989; Wagrowaski and Hites, Environmental Science and Technology, 31: 279–282, 1997). Polycyclic aromatic hydrocarbons (PAH) are ubiquitous constituents of urban airborne particulate mostly generated by anthropogenic activities (Li et al., Environmental Science and Technology, 37:1958–2965, 2003; Thorsen et al., Environmental Science and Technology, 38: 2029–2037, 2004; Ohura et al., Environmental Science and Technology, 32: 450–455, 2004) and some of them are of major health concern mainly due to their well-known carcinogenic and mutagenic properties (Soclo et al., Marine Pollution Bulletin, 40: 387–396, 2000; Chen et al., Environment International, 28: 659–668, 2003; Larsen and Baker, Environmental Science and Technology, 32: 450–455, 2003). Limited information is available on PAHs contributions from refineries to ambient air. Hence this study would not only create a database but also provide necessary inputs towards dose-response relationship for fixing standards. Also, since it acts as precursor to green house gas, the data would be useful for climate change assessments. The objective of this article is to find out the concentration of PAHs in particulate matter around petroleum refinery and compare with their concentrations in major Indian urban centers.     

A spectrophotometric assay method for vanadium in biological and environmental samples using 2,4-dinitrophenylhydrazine with imipramine hydrochloride

A simple, rapid, and sensitive method involving the interaction of 2,4-dinitrophenylhydrazine with imipramine hydrochloride in presence of vanadium (V) in sulfuric acid medium has been proposed for the determination of vanadium. The purple-colored product developed showed an absorption maximum at 560 nm and was stable for 24 h. The working curve was linear over the concentration range of 0.1–2.8 μg ml^− 1, with sensitivity of detection of 0.0124 μg ml^− 1. Molar absorptivity and Sandell’s sensitivity were found to be 2.6 × 10⁴ l/mol cm and 0.0039 μg cm^− 1, respectively. The accuracy of the proposed method was assessed by Student’s t test and variance ratio F test, and the results were on par with the reported method. The method was successfully used in the determination of V in water, human urine, soil, and plant samples, and it was free from interference by various concomitant ions.     

Formation of Soluble Complexes of Metals with Humic Acid and Its Environmental Significance

In order to investigate the role of functional groups present in humic acid(s) (HA) during complex formation, water soluble complexes between HA isolated from soil and metals (Pb, Ca, As, Ni, Cr, Co, Cu, Cd, Fe, Mn, Mg and Zn) were prepared and subjected to infrared (IR) spectroscopy. the IR data revealed the involvement of the - OH group of humic acid in complex formation with all metals except copper and arsenic, whereas the - COOH group of HA was found to be the preferred site of binding for all the metals. the significance of findings in relation to detoxification of environmental pollutants is discussed in this paper.     

Field evaluation of resistivity sensors for in situ moisture measurement in a bioreactor landfill

The ability of resistance-based sensors to measure in situ waste moisture content in a landfill was examined. One hundred and thirty-five resistance-based sensors were installed in a leachate recirculation well field at a bioreactor landfill in Florida, US. The performance of these sensors was studied for a period of over 6 years. The sensors were found to respond to an increase in moisture resulting from leachate recirculation. It was observed that 78% of sensors worked successfully in the field during the study period. The initial spatial average moisture content determined by the sensor readings (using a laboratory-derived calibration) was 42.8% compared to 23% from gravimetric readings. Eighteen sensors (13%) showed that they were saturated before liquid addition, and no change in moisture content was observed in these sensors during the study period. Laboratory-derived calibration methods resulted in an over-estimation of moisture content. An alternate field-calibration method, where wetted sensor output was assumed equal to the average of gravimetric measurements for wet samples, was evaluated. The final spatial average moisture contents were 64.2% and 44.4% for the laboratory-derived and field-derived calibration methodologies, respectively, compared to 45% measured gravimetrically from excavated waste samples. When moisture content was determined using a mass balance approach, the result was 34.6%. The results suggest that when appropriately calibrated, resistivity-based sensors can be used to obtain a reasonably accurate estimate of local moisture content. However, caution should be taken to extend the moisture content values that are representative of waste surrounding the sensors to estimate the overall moisture content on the landfill-wide scale.