Evaluation of the effects of PFAS soil adsorption and transformation in the presence of divalent cations under ambient conditions

A bench‐scale study was conducted to evaluate the effect of divalent cations on the adsorption of perfluoroalkyl and polyfluoroalkyl substances (PFAS) onto soil particles. The study entailed batch testing of a synthetic soil mixture under a range of Epsom salt (soluble magnesium sulfate heptahydrate) concentrations. The synthetic soil was produced using a mix of sand, silt, clay, and organic matter that then was mixed and saturated with water collected from a PFAS‐impacted water source. The results indicate that variable concentrations of magnesium (divalent cation) had a minor effect on the sorption of perfluorooctane sulfonate with the highest sorption occurring in the strongest solution of Epsom salt. An unanticipated result of the test involved apparent biomediated transformation of polyfluorinated alkylated sulfonates (fluorotelomers or FTS) to perfluorooctanoic acid, perfluoroheptanoic acid (PFHpA), and perfluorononanoic acid. We believe this is the first time the complete transformation of 6:2 FTS to PFHpA has been observed and reported under ambient surface water‐like conditions within 6 months, a relatively short timeframe.     

Building Resilience during Recovery: Lessons from Colorado’s Watershed Resilience Pilot Program

The 17 Sustainable Development Goals (SDGs) underpinned by 169 targets presents national governments with huge challenges for implementation. We developed a proposal for a National Blueprint Framework (NBF) with 24 water-related indicators, centered on SDG 6 (clean water and sanitation for all), each with a specific target. We applied the NBF to 28 EU Member States (EU-28) and conclude that:     

Green Screen or Smokescreen? Hollywood's Messages about Nature and the Environment

This paper examines ideologies about nature and the environment in popular, animated Hollywood films—including The Lorax, Wall-E, and Ice Age 2—through a symptomatic reading. The primary goal of the analysis is to elucidate key omissions in these texts through an assessment of the problematic—defined in this research as an a-priori answer to perceived audience concerns regarding the role of consumerism and corporate culture in environmental problems. Silences in the films revolve around: how environmental problems are defined; what the consequences are; who the responsible parties are; and what potential solutions exist to mitigate them. The significance of the research is underscored by the formation of an increasingly intimate relationship between children, consumer culture, and commercial media in the USA, as well as the increasingly dire information emerging about global environmental issues. This analysis reveals the dual, often conflicting, messages that commercial film provides for its young audiences about pivotal environmental problems and their potential resolution.     

Drivers of carbon dioxide emissions: an empirical investigation using hierarchical and non-hierarchical clustering methods

The mitigation of CO2 emissions requires a global effort with common but differentiated responsibilities. In this paper, we identify clusters of CO2 emissions across 72 countries. First, using the stochastic version of the IPAT and employing the dynamic common correlated effects technique, we identify three key determinants affecting CO2 emissions (non-renewables, population, and real GDP). In the second step, both hierarchical and non-hierarchical clustering methods are considered to identify the optimal number of clusters. We identify two to four clusters with different member countries, and in particular establish that in most cases, a 2-cluster solution appears to be optimal. The contents of clusters vary slightly according to the clustering methods for each period. The clustering results from using only the overall CO2 emissions indicate that the countries we consider form three clusters, with China and the USA each within a single member cluster. The remaining 70 countries form the third cluster. Our findings reflect the prominent roles of China and the USA in overall CO2 emissions. Analyses with sub-period and largest emitters reflect a different clustering structure. Some policy recommendations in setting emission reductions are made, considering different clusters across countries.     

Monsanto’s Biotechnology Politics: Discourses of Legitimation

Since the first product became commercially available in 1995, biotechnology has become the fastest growing crop technology, dominating large shares of the global agricultural market. The development of biotechnology, however, has given rise to questions regarding human and ecological safety, culminating in local and global political battles. While researchers interested in biotech politics have focused on areas such as media framing, social movements, and campaign work, less attention has been paid to how the industry has historically promoted and legitimized this swift proliferation. In this study, we conduct a discourse analysis of documents available on live and archived websites to discern the legitimation strategies employed by one important corporate actor, Monsanto. Findings show that for nearly two decades, Monsanto consistently employed discursive resources that concealed details about actors and action, reflected trends among experts in global sustainability discourse, and reshaped narratives to promote itself, products, and biotechnology in general.     

Evaluation in situ of genotoxicity and stress in South American common toad <Emphasis Type="Italic">Rhinella arenarum</Emphasis> in environments related to fluorite mine

Little attention has been paid to the impact of wastewater generated by mining activities on fluoride. In this study, we evaluated the hematology responses of common South American toad Rhinella arenarum inhabiting natural and artificial environments associated with a fluorite mine from central Argentina. We analyzed three sampling stations associated with the fluorite mine: (I) Los Cerros Negros stream (CN), which runs on granitic rock with a high fluorite content; (II) Los Vallecitos stream (LV), which runs on metamorphic rock with low fluorite content; and (III) artificial decantation ponds (DP) containing sediments produced by fluorite flotation process. We calculated frequencies of micronuclei, erythrocyte nuclear abnormalities, mitosis, and immature erythrocytes. In addition, we performed a differential leukocyte count and determined neutrophils/lymphocyte ratio as a stress response estimator. We found high micronucleus (MN) and erythrocyte nuclear abnormality (ENA) frequencies in DP and CN but low frequencies in LV. The neutrophil/lymphocyte ratio was different among sites, with a significant increase in individuals from DP. Values registered in DP could be caused by exposure to mixture of compounds registered in dams that hold wastewater, while high values registered in CN stream might be due to natural concentrations of fluoride. Our results suggest that blood is an effective and non-destructive sensitive indicator for monitoring genotoxic agents in freshwater ecosystems.     

Detention Outlet Retrofit Improves the Functionality of Existing Detention Basins by Reducing Erosive Flows in Receiving Channels

By discharging excess stormwater at rates that more frequently exceed the critical flow for stream erosion, conventional detention basins often contribute to increased channel instability in urban and suburban systems that can be detrimental to aquatic habitat and water quality, as well as adjacent property and infrastructure. However, these ubiquitous assets, valued at approximately $600,000 per km² in a representative suburban watershed, are ideal candidates to aid in reversing such cycles of channel degradation because improving their functionality would not necessarily require property acquisition or heavy construction. The objective of this research was to develop a simple, cost‐effective device that could be installed in detention basin outlets to reduce the erosive power of the relatively frequent storm events (~ < two‐year recurrence) and provide a passive bypass to maintain flood control performance during infrequent storms (such as the 100‐year recurrence). Results from a pilot installation show that the Detain H₂O device reduced the cumulative sediment transport capacity of the preretrofit condition by greater than 40%, and contributed to reduced flashiness and prolonged baseflows in receiving streams. When scaling the strategy across a watershed, these results suggest that potential gains in water quality and stream channel stability could be achieved at costs that are orders of magnitude less than comparable benefits from newly constructed stormwater control measures.     

Value chain for next-generation biofuels: resilience and sustainability of the product life cycle

Multiple factors including climate change, price uncertainties, and geopolitical instability have prompted many industries to investigate the feasibility of replacing traditional petroleum-based fuels with biofuel alternatives. However, to make this transition successful, these new biofuels must be environmentally sustainable and the necessary support infrastructure must be in place to make the production, distribution, and storage of these biofuels technologically feasible and cost effective. Developing a value chain, spanning from feedstock production to distribution to end users, requires garnering buy-in from multiple stakeholders by demonstrating environmental, economic, and social benefits and incentives. Two critical factors are the environmental benefits achieved from the use of the biofuel technology and the degree of resilience of the value chain to emergent conditions to ensure steady supply to consumers. Moreover, different biofuel pathways have different costs, benefits, and risks which must be compared. In this paper, we describe how environmental sustainability can be modeled using life cycle assessment (LCA) and how the resilience of value chain initiatives can be modeled using a scenario-based decision model. We then describe how sustainability and resilience assessments can be integrated in an iterative, anticipatory LCA framework. These assessments can be used as the basis for a business case for various investments, as well as a means for promoting responsible innovations, with the aviation industry used as a case study.     

Phytoremediation of a Petroleum‐Hydrocarbon Contaminated Shallow Aquifer in Elizabeth City,North Carolina,USA

A former bulk fuel terminal in North Carolina is a groundwater phytoremediation demonstration site where 3,250 hybrid poplars, willows, and pine trees were planted from 2006 to 2008 over approximately 579,000 L of residual gasoline, diesel, and jet fuel. Since 2011, the groundwater altitude is lower in the area with trees than outside the planted area. Soil‐gas analyses showed a 95 percent mass loss for total petroleum hydrocarbons (TPH) and a 99 percent mass loss for benzene, toluene, ethylbenzene, and xylenes (BTEX). BTEX and methyl tert‐butyl ether concentrations have decreased in groundwater. Interpolations of free‐phase, fuel product gauging data show reduced thicknesses across the site and pooling of fuel product where poplar biomass is greatest. Isolated clusters of tree mortalities have persisted in areas with high TPH and BTEX mass. Toxicity assays showed impaired water use for willows and poplars exposed to the site's fuel product, but Populus survival was higher than the willows or pines on‐site, even in a noncontaminated control area. All four Populus clones survived well at the site. © 2014 Wiley Periodicals, Inc.*     

Isolation and characterization of a Rhodococcus strain with phenol-degrading ability and its potential use for tannery effluent biotreatment

Introduction

Wastewater derived from leather production may contain phenols, which are highly toxic, and their degradation could be possible through bioremediation technologies.

Materials, methods and results

In the present work, microbial degradation of phenol was studied using a tolerant bacterial strain, named CS1, isolated from tannery sediments. This strain was able to survive in the presence of phenol at concentrations of up to 1,000?mg/L. On the basis of morphological and biochemical properties, 16S rRNA gene sequencing, and phylogenetic analysis, the isolated strain was identified as Rhodococcus sp. Phenol removal was evaluated at a lab-scale in Erlenmeyer flasks and at a bioreactor scale in a stirred tank reactor. Rhodococcus sp. CS1 was able to completely remove phenol in a range of 200 to 1,000?mg/L in mineral medium at 30 ± 2?°C and pH 7 as optimal conditions. In the stirred tank bioreactor, we studied the effect of some parameters, such as agitation (200?C600 rpm) and aeration (1?C3?vvm), on growth and phenol removal efficiency. Faster phenol biodegradation was obtained in the bioreactor than in Erlenmeyer flasks, and maximum phenol removal was achieved at 400?rpm and 1 vvm in only 12?h. Furthermore, Rhodococcus sp. CS1 strain was able to grow and completely degrade phenols from tannery effluents after 9?h of incubation.

Conclusion

Based on these results, Rhodococcus sp. CS1 could be an appropriate microorganism for bioremediation of tannery effluents or other phenol-containing wastewaters.