Environmental practices and firm performance: an empirical analysis in the Spanish hotel industry

The impact of environmental practices on firm performance raises an ongoing debate in which the review of the existing literature yields no conclusive results. Different methods have been used to study this relationship and most of the analyses have focused on manufacturing companies. This paper examines the link between environmental practices and firm performance in the Spanish hotel industry using two methods: a cluster analysis and a regression analysis. First, three groups were defined according to their environmental proactivity, and hotels showing a stronger commitment to environmental practices proved to reach higher performance levels. Second, through the regression analysis, findings showed that environmental practices impact significantly on several performance variables.     

Characterization of the olfactory impact around a wastewater treatment plant: optimization and validation of a hydrogen sulfide determination procedure based on passive diffusion sampling

A monitoring program based on an indirect method was conducted to assess the approximation of the olfactory impact in several wastewater treatment plants (in the present work, only one is shown). The method uses H2S passive sampling using Palmes-type diffusion tubes impregnated with silver nitrate and fluorometric analysis employing fluorescein mercuric acetate. The analytical procedure was validated in the exposure chamber. Exposure periods ofat least 4 days are recommended. The quantification limit of the procedure is 0.61 ppb for a 5-day sampling, which allows the H2S immission (ground concentration) level to be measured within its low odor threshold, from 0.5 to 300 ppb. Experimental results suggest an exposure time greater than 4 days, while recovery efficiency of the procedure, 93.0+/-1.8%, seems not to depend on the amount of H2S collected by the samplers within their application range. The repeatability, expressed as relative standard deviation, is lower than 7%, which is within the limits normally accepted for this type of sampler. Statistical comparison showed that this procedure and the reference method provide analogous accuracy. The proposed procedure was applied in two experimental campaigns, one intensive and the other extensive, and concentrations within the H2S low odor threshold were quantified at each sampling point. From these results, it can be concluded that the procedure shows good potential for monitoring the olfactory impact around facilities where H2S emissions are dominant.     

Now you see me,now you don’t: iridescence increases the efficacy of lizard chromatic signals

The selective forces imposed by primary receivers and unintended eavesdroppers of animal signals often act in opposite directions, constraining the development of conspicuous coloration. Because iridescent colours change their chromatic properties with viewer angle, iridescence offers a potential mechanism to relax this trade-off when the relevant observers involved in the evolution of signal design adopt different viewer geometries. We used reflectance spectrophotometry and visual modelling to test if the striking blue head coloration of males of the lizard Lacerta schreibeiri (1) is iridescent and (2) is more conspicuous when viewed from the perspective of conspecifics than from that of the main predators of adult L. schreibeiri (raptors). We demonstrate that the blue heads of L. schreiberi show angle-dependent changes in their chromatic properties. This variation allows the blue heads to be relatively conspicuous to conspecific viewers located in the same horizontal plane as the sender, while simultaneously being relatively cryptic to birds that see it from above. This study is the first to suggest the use of angle-dependent chromatic signals in lizards, and provides the first evidence of the adaptive function of iridescent coloration based on its detectability to different observers.     

Measurement of trifluralin volatilization in the field: Relation to soil residue and effect of soil incorporation

Volatilization may represent a major dissipation pathway for pesticides applied to soils or crops. A field experiment (September, 2002), consisted in volatilization fluxes measurements during 6 days, covering the periods before and after soil incorporation carried out 24 h after trifluralin spraying on bare soil. Evolution of concentration in soil was measured during 101 days, together with soil physical and meteorological variables. Volatilization fluxes were very high immediately after application (1900 ng m(-2) s(-1)), decreased down to 100 ng m(-2) s(-1) in the following 24 h. Soil incorporation strongly abated trifluralin concentration in the air. 99% of the total volatilization losses recorded over the 6 days following application occurred before incorporation. Volatilization fluxes evidenced a diurnal cycle driven by environmental conditions. Soil trifluralin residues could still be quantified 101 days after application. Our results highlight the caution required when using soil degradation half-life values in the field for volatile compounds.     

Integrated environmental assessment of biodiesel production from soybean in Brazil

This paper presents the results of an environmental impact assessment of biodiesel production from soybean in Brazil. In order to achieve this objective, environmental impact indicators provided by Emergy Accounting (EA), Embodied Energy Analysis (EEA) and Material Flow Accounting (MFA) were used. The results showed that for one liter of biodiesel 8.8 kg of topsoil are lost in erosion, besides the cost of 0.2 kg of fertilizers, about 5.2 m² of crop area, 7.33 kg of abiotic materials, 9.0 tons of water and 0.66 kg of air and about 0.86 kg of CO₂ were released. About 0.27 kg of crude oil equivalent is required as inputs to produce one liter of biodiesel, which means an energy return of 2.48 J of biodiesel per Joule of fossil fuel invested. The transformity of biodiesel (3.90E + 05 seJ J^?1) is higher than those calculated for fossil fuels as other biofuels, indicating a higher demand for direct and indirect environmental support. Similarly, the biodiesel emergy yield ratio (1.62) indicates that a very low net emergy is delivered to consumers, compared to alternatives. Obtained results show that when crop production and industrial conversion to fuel are supported by fossil fuels in the form of chemicals, goods, and process energy, the fraction of fuel that can actually be considered renewable is very low (around 31%).     

Evaluation of Cu-PPHs as active catalysts for the SCR process to control NOx emissions from heavy duty diesel vehicles

Copper based catalysts supported on mesoporous materials, which were in turn based on a surfactant expanded zirconium phosphate for the formation of silica galleries in the interlayer space, were prepared by the impregnation method. They were then characterised and tested in the selective catalytic reduction of NO with ammonia as active catalysts for the control of the NOx emissions from heavy duty vehicles. Copper catalysts displayed a high catalytic performance, even in the presence of 14% (v/v) of H2O and 100 ppm of SO2. They also displayed improved catalytic behaviour when compared to a CuZSM5 catalyst.     

Influence of weight on the content of trace metals in tissues of Mytilus galloprovincialis (Lamarck, 1819): a forecast model

Fifty seven samples of Mytilus galloprovincialis (Lamarck, 1819) collected along the breakwater barriers of Fano (station 1) and Pesaro (station 2), Adriatic Sea, Marche Region, central Italy, were analyzed by atomic absorption spectrometry and Cd, Cu, Pb and Zn concentrations in the soft tissues were measured. The aims of this work were the statistical analysis of Cd-weight, Cu-weight, Pb-weight, Zn-weight relationships, and the building of a tendency function that allows assessing with a good approximation the concentrations of a metal in different weight organisms. In Mytilus galloprovincialis the content of Cd proportionally grew with the weight and therefore its concentration was independent from this factor; while the concentration of Pb decreased as the weight increased. In both cases the accuracy of multiple regression models improved considering the variable ‘site’, while the same approach appeared not reliable for Cu and Zn, that were two essential metals. Our results showed that a tendency function was reliable, solid and able to predict to a very satisfying extent the concentration of non-physiological metals, like Cd and Pb; while it did not show a good approximation with real Cu and Zn contents.     

Kinetics of particulate organic matter removal as a response to bioflocculation in aerobic biofilm reactors.

Recent research has identified that the major fraction of chemical oxygen demand in domestic wastewaters is in particulate form. The research presented herein develops the kinetics of particle removal as a response to bioflocculation at the surface of aerobic biofilms. This study focuses on the removal of particles that are maintained in aqueous suspension after 30 minutes of gravity settling. It is helpful to consider the particulate organics removal process in biofilms as the sum of four steps, namely (1) external transport of the particles to the biofilm surface, (2) bioflocculation, (3) organic particulate hydrolysis, and (4) diffusion and reaction of the solubilized organics by the bacterial cells comprising the biofilm. Organic (native corn starch) and inorganic particle (Min-U-Sil 10 [U.S. Silica Company, Berkeley Springs, West Virginia]) suspensions, with micronutrients, were continuously fed to a rotating disc biofilm reactor to verify a first-order kinetic expression that has been used to describe bioflocculation and to demonstrate that bioflocculation is the primary particle removal mechanism. Extracellular polymeric substances were extracted and quantified to describe the role they play in the bioflocculation process.     

Characteristic overpressure–impulse–distance curves for the detonation of explosives, pyrotechnics or unstable substances

A number of models have been proposed to calculate overpressure and impulse from accidental industrial explosions. When the blast is produced by explosives, pyrotechnics or unstable substances, the TNT equivalent model is widely used. From the curves given by this model, data are fitted to obtain equations showing the relationship between overpressure, impulse and distance. These equations, referred to here as characteristic curves, can be fitted by means of power equations, which depend on the TNT equivalent mass. Characteristic curves allow determination of overpressure and impulse at each distance.