Pesticide removal from waste spray-tank water by organoclay adsorption after field application: an approach for a formulation of cyprodinil containing antifoaming/defoaming agents

Purpose  

Many reports on purification of water containing pesticides are based on studies using unformulated active ingredients. However, most commercial formulations contain additives/adjuvants or are manufactured using microencapsulation which may influence the purification process. Therefore, the main objective of this work was to develop and test a pilot scheme for decontaminating water containing pesticides formulated with antifoaming/defoaming agents.     

Material and energy recovery in integrated waste management systems: the potential for energy recovery

This article is part of a set of six coordinated papers reporting the main findings of a research project carried out by five Italian universities on "Material and energy recovery in Integrated Waste Management Systems (IWMS)". An overview of the project and a summary of the most relevant results can be found in the introductory article of the series. This paper describes the work related to the evaluation of mass and energy balances, which has consisted of three major efforts (i) development of a model for quantifying the energy content and the elemental compositions of the waste streams appearing in a IWMS; (ii) upgrade of an earlier model to predict the performances of Waste-to-Energy (WtE) plants; (iii) evaluation of mass and energy balances of all the scenarios and the recovery paths considered in the project. Results show that not only the amount of material available for energy recovery is significantly higher than the Unsorted Residual Waste (URW) left after Separate Collection (SC), because selection and recycling generate significant amounts of residues, but its heating value is higher than that of the original, gross waste. Therefore, the energy potential of what is left after recycling is always higher than the complement to 100% of the Source Separation Level (SSL). Also, increasing SSL has marginal effects on the potential for energy recovery: nearly doubling SSL (from 35% to 65%) reduces the energy potential only by one fourth. Consequently, even at high SSL energy recovery is a fundamental step of a sustainable waste management system. Variations of SSL do bring about variations of the composition, heating value and moisture content of the material fed to WtE plants, but these variations (i) are smaller than one can expect; (ii) have marginal effects on the performances of the WtE plant. These considerations suggest that the mere value of SSL is not a good indicator of the quality of the waste management system, nor of its energy and environmental outcome. Given the well-known dependence of the efficiency of steam power plants with their power output, the efficiency of energy recovery crucially depends on the size of the IWMS served by the WtE plant. A fivefold increase of the amount of gross waste handled in the IWMS (from 150,000 to 750,000 tons per year of gross waste) allows increasing the electric efficiencies of the WtE plant by about 6-7 percentage points (from 21-23% to 28.5% circa).     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

Diffusion of innovative agricultural production systems for sustainable development of small islands: A methodological approach based on the science of complexity

In order to develop small islands, not only must a vital agricultural system be maintained, but the range of opportunities for tourism must be increased with respect to both the seaside and the environmental features of the rural landscape. As an alternative to the traditional and economically declining ones, many innovative production processes can be identified, but their success depends on their interaction with the physical, biological, economic and social environment. In order to identify the main nodes and the most critical interactions, so as to increase the probability of success of a new productive process, a methodological approach based on the science of complexity is proposed for the cultivation of capers (Capparis spinosa L.) on the island of Pantelleria. The methodology encompasses the identification of actors and factors involved. the quantitative evaluation of their interactions with the different stages of the productive process, and a quasiquantitative evaluation of the probability that the particular action will be performed successfully. The study of “traditional,” “modernized,” and “modernized-sustainable” processes, shows that the modernized-sustainable process offers mutually reinforcing opportunities in terms of an integrated development of high-quality agricultural products and the enhancement of environmental features, in conjunction with high-efficiency production techniques, in conjunction with high-efficiency production techniques, in a way that suits the development of Pantelleria. There is a high probability of failure, however, as a result of the large number of critical factors. Nevertheless, the present study indicates which activities will enhance the probability of successful innovation in the production process.     

Translocation and persistence of EDU (ethylenediurea) in plants: the relationship with its role in ozone damage

Bean plants (Phaseolus vulgaris L. cv Lit) were treated with N-[2-(2-oxo-1-imidazolinidyl)ethyl]-N'-phenylurea (EDU) (150 microg ml(-1)) in hydroponic conditions. The EDU concentration in different plant tissues was measured by HPLC. EDU accumulated in leaves and persisted for more than 10 days showing a slow degradation. Using five different EDU concentrations, a significant relationship between EDU concentration in nutrient solution, ozone tolerance and EDU concentration in leaves was shown. Leaves which contained more EDU were less sensitive to ozone damage. Investigations on protoplasts and cell cultures showed that EDU did not enter the cells. Possible implications of EDU accumulation in the leaf apoplast are discussed.     

Computer image generation for job simulation: An effective approach to occupational Risk Analysis

The paper deals with the general approach and features of the computer image generation for job simulation (CIGJS) method, as specially developed to support the Job Safety Analysis (JSA) technique.Starting from some general considerations on the occupational safety and health statistical data collection in Italy, when compared to US methodology, the paper provides an overview of the CIGJS method, developed to improve the effectiveness and usability of the traditional JSA.A case study is discussed in order to highlight how CIGJS makes the use of the JSA technique possible also at the design stage (this being fundamental according to a Prevention through Design approach), and allows to control the effectiveness of the adopted countermeasures.The application of the method complies with the basic European Directives requirements both on workers’ safety and health and on machinery analysis.Furthermore, CIGJS may substantially aid workers’ education and training, to the point of being a possible simulation-training device.     

Early detection and evaluation of waste through sensorized containers for a collection monitoring application

The present study describes a novel application for use in the monitoring of municipal solid waste, based on distributed sensor technology and geographical information systems. Original field testing and evaluation of the application were carried out in Pudong, Shanghai (PR China).The local waste management system in Pudong features particular requirements related to the rapidly increasing rate of waste production. In view of the fact that collected waste is currently deployed to landfills or to incineration plants within the context investigated, the key aspects to be taken into account in waste collection procedures include monitoring of the overall amount of waste produced, quantitative measurement of the waste present at each collection point and identification of classes of material present in the collected waste. The case study described herein focuses particularly on the above mentioned aspects, proposing the implementation of a network of sensorized waste containers linked to a data management system.Containers used were equipped with a set of sensors mounted onto standard waste bins. The design, implementation and validation procedures applied are subsequently described. The main aim to be achieved by data collection and evaluation was to provide for feasibility analysis of the final device. Data pertaining to the content of waste containers, sampled and processed by means of devices validated on two purpose-designed prototypes, were therefore uploaded to a central monitoring server using GPRS connection. The data monitoring and management modules are integrated into an existing application used by local municipal authorities.A field test campaign was performed in the Pudong area. The system was evaluated in terms of real data flow from the network nodes (containers) as well as in terms of optimization functions, such as collection vehicle routing and scheduling. The most important outcomes obtained were related to calculations of waste weight and volume. The latter data were subsequently used as parameters for the routing optimization of collection trucks and material density evaluation.     

A novel environmental indicator for monitoring of pesticides

The identification of an indicator for monitoring pesticides is a very effective analytical approach because it allows one to schedule and simplify the analytical routine. In this study, a new indicator has been designed, which has to be able to define a scale of priorities in the pesticides monitoring. A starting equation was developed involving the escaping tendency of a given substance from a phase (based on the Mackay model I level). The reliability of the indicator was tested by application to a model system, consisting of a defined and limited area, choosing water as matrix over a period of 6 years. A group of marker compounds was also defined to implement the predictive efficacy of the indicator. The results obtained by modeling were compared to those obtained by experimentation of the same model system. The indicator was subsequently and appropriately modified creating a new equation, including a kinetic factor, which considers the environmental degradation processes. The effect of the rectified indicator was consistent with the sales data list of compounds, when applied to the markers. The indicator developed in this study, tested as a model on specific area-phase-period (Province of Siena, water phase, 2000?C2006), is applicable to any other area-phase-period, adjusting the partition value of the Mackay model for the case under study.