Distribution and possible source of trace elements in the sediment cores of a tropical macrotidal estuary and their ecotoxicological significance

The paper presents the first document regarding concentration, distribution and possible sources of selected trace elements (Cu, Fe, Mn, Zn, Cr, Co, Ni, Pb, Al, B and Ba) in core sediments (<63 micro particle size) from the lower stretch of Hugli (Ganges) estuary, northeast coast of Bay of Bengal by ICP-AES and EDXRF to evaluate geochemical processes influencing their distribution and possible environmental consequences. The levels of elements showed a wide range of variations in different core depths, in upper and lower intertidal zones as well as among three sampling stations. The most interesting feature of the study is the downward increase of concentrations of majority of the elements reaching overall maximum values at a depth of 20-28 cm in upper littoral zone of the site located in the extreme downstream stretch of the estuary. Values of organic carbon showed very strong positive correlations with most of the elements as revealed by correlation matrix (r) values. The interelemental relationship revealed the identical behavior of element during its transport in the estuarine environment. The overall variation in concentration can be attributed to differential discharge of untreated effluents originating from industrial, agricultural, and aquacultural sources as well as from domestic sewage along with the fishing and boating activities. The resulting compositional dataset was tested by principal component analyses and cluster analyses. Pollution load index (PLI) and index of Geoaccumulation (Igeo) revealed overall low values but the enrichment factors (EFs) for Pb were typically high for all the stations. The mean concentrations of Zn and to some extent Cu exceeded the Effects Range-Low (ER-L) values in the majority of the cases indicating that there may be some ecotoxicological risk to organisms living in sediments. The concentration of the trace elements reported in this work is useful as baselines for comparison in future sediment quality studies.     

Planning and implementing sustainability in higher education institutions: an overview of the difficulties and potentials

Planning in sustainable development is believed to be an important element in allowing higher education institutions to set their goals and to commit themselves towards undertaking concrete actions and measures at all levels in order to implement sustainability. Yet, there is a paucity of research that has looked at the extent to which planning can support institutions of higher education to assess their performances and to determine whether the set aims have been met. This research gap needs to be met to allow a better understanding of how planning can help to promote the integration of the three components of sustainable development – economic development, social development and environmental protection in higher education. This paper explores the challenges for planning the sustainable development in higher education, also outlining the potentials lessons learned that could assist in improving Education for Sustainable Development efforts in Higher Education Institutions. Among its main results are the fact that many universities wish to pursue sustainable development, but their efforts are hindered by lack of institutional support and planning and limited emphasis on approaches, such as problem-based learning. The universities that are engaged in the field have to face many problems, varying from limited resources to lack of trained staff. As a result, integrated approaches to sustainability become difficult to implement. Finally, the paper has identified the fact that many opportunities offered mainstream developments, such as the UN Declaration ‘The World we Want’ or the UN Sustainable Development Goals are not being put to full use.     

Use of feathers of feral pigeons (Columba livia) as a technique for metal quantification and environmental monitoring

This study quantifies metal concentrations in washed and unwashed feathers of feral pigeons (Columba livia). The material was collected in two different sites: Goiania (capital of Goiás State), with high anthropic activities, and Jataí (a city in Goiás), with low anthropic activities. Results revealed that metals such as Pb, Cr, and Cd were deposited in the feathers originating from air and soil (exogenous process). Other metals such as Cu, Fe, Mn, and Zn, which are part of the tissue constitution of a living being, were absorbed through the pigeons' diet (endogenous process). There was a statistically significant difference between mean values of Cd, Pb, and Cr in the three collection sites. The order of metal concentrations were Civic Square > Zoo > Jataí, which shows highest levels of metal contamination in anthropic environments. Significant differences between Cd, Pb, and Cr in washed and unwashed feathers suggest that metal concentrations are directly related to exposure time due to exogenous sources. We concluded that it is possible to quantify and monitor metal levels in the environment by analyzing the feathers of urban feral pigeons. Furthermore, unwashed feathers were especially efficient to investigate endogenous and exogenous absorption of the metals in our study.     

Evaluation of the aggressive potential of marine chloride and sulfate salts on mortars applied as renders in the Metropolitan Region of Salvador--Bahia, Brazil

In recent years, growing interest has focused on determining the performance of materials and evaluating the service life of structures exposed to various environmental forces. In this context, the determination of the aggressive potential of marine salts on mortars used as external renders is critical. The present study aimed to evaluate the spatial distribution of marine salts relative to distance from the sea. This was done by monitoring the deposition rate of chlorides and sulfates in wet candle sensors, located at nine stations scattered around the Metropolitan Region of Salvador, state of Bahia, Brazil. The study also determined the effectiveness of water-soluble salts at penetrating three different types of mortars of varying cement content via deposition and diffusion. The methodology employed enabled an evaluation of the efficiency of the monitoring sensors' measurement of the aggressiveness potential of local marine aerosol, and determination of the comparative performance of the three mortars tested, from the standpoint of resistance to salt penetration. The type and amount of salts captured both in solution and in powder samples extracted from the mortars were determined by ion chromatography. The analysis of the various types of mortars tested indicated which types are more resistant to the aggressive potential of the region's marine aerosol and the distance from the shore where local buildings are liable to be most strongly affected.     

A Solvent-Free Approach for Production of Films from Pectin and Fungal Biomass

Self-binding ability of the pectin molecules was used to produce pectin films using the compression molding technique, as an alternative method to the high energy-demanding and solvent-using casting technique. Moreover, incorporation of fungal biomass and its effects on the properties of the films was studied. Pectin powder plasticized with 30% glycerol was subjected to heat compression molding (120 °C, 1.33 MPa, 10 min) yielding pectin films with tensile strength and elongation at break of 15.7 MPa and 5.5%, respectively. The filamentous fungus Rhizopus oryzae was cultivated using the water-soluble nutrients obtained from citrus waste and yielded a biomass containing 31% proteins and 20% lipids. Comparatively, the same strain was cultivated in a semi-synthetic medium resulting in a biomass with higher protein (60%) and lower lipid content (10%). SEM images showed addition of biomass yielded films with less debris compared to the pectin films. Incorporation of the low protein content biomass up to 15% did not significantly reduce the mechanical strength of the pectin films. In contrast, addition of protein-rich biomass (up to 20%) enhanced the tensile strength of the films (16.1–19.3 MPa). Lastly, the fungal biomass reduced the water vapor permeability of the pectin films.     

Soil and vegetation carbon stocks in Brazilian Western Amazonia: relationships and ecological implications for natural landscapes

The relationships between soils attributes, soil carbon stocks and vegetation carbon stocks are poorly know in Amazonia, even at regional scale. In this paper, we used the large and reliable soil database from Western Amazonia obtained from the RADAMBRASIL project and recent estimates of vegetation biomass to investigate some environmental relationships, quantifying C stocks of intact ecosystem in Western Amazonia. The results allowed separating the western Amazonia into 6 sectors, called pedo-zones: Roraima, Rio Negro Basin, Tertiary Plateaux of the Amazon, Javari-Juruá-Purus lowland, Acre Basin and Rondonia uplands. The highest C stock for the whole soil is observed in the Acre and in the Rio Negro sectors. In the former, this is due to the high nutrient status and high clay activity, whereas in the latter, it is attributed to a downward carbon movement attributed to widespread podzolization and arenization, forming spodic horizons. The youthful nature of shallow soils of the Javari-Juruá-Purus lowlands, associated with high Al, results in a high phytomass C/soil C ratio. A similar trend was observed for the shallow soils from the Roraima and Rondonia highlands. A consistent east–west decline in biomass carbon in the Rio Negro Basin sector is associated with increasing rainfall and higher sand amounts. It is related to lesser C protection and greater C loss of sandy soils, subjected to active chemical leaching and widespread podzolization. Also, these soils possess lower cation exchangeable capacity and lower water retention capacity. Zones where deeply weathered Latosols dominate have a overall pattern of high C sequestration, and greater than the shallower soils from the upper Amazon, west of Madeira and Negro rivers. This was attributed to deeper incorporation of carbon in these clayey and highly pedo-bioturbated soils. The results highlight the urgent need for refining soil data at an appropriate scale for C stocks calculations purposes in Amazonia. There is a risk of misinterpreting C stocks in Amazonia when such great pedological variability is not taken into account.     

Identification of some plasticizers compounds in landfill leachate

In this work it was described a simple method for extraction of plasticizer compounds (mainly phthalate esters and bisphenol A (BPA)) from landfill leachate samples. The samples were submitted to an extraction procedures based on precipitation, solid phase extraction (SPE) and ionic exchange chromatography (IEC). Firstly the landfill leachate sample was acidified by addition of HCl concentrated, in order to precipitate the organic compounds that are less soluble in water. The precipitate was washed with several solvents. The aqueous phase was then submitted to SPE with XAD-4 resin and IEC with Amberlyst A-27 resin. The instrumental analysis was performed by gas chromatography with mass spectrometer detector (GC/MSD) and the compounds were identified by the GC/MSD library (Wiley) and by using some standard substances. These methodologies allow the isolation and identification of the following compounds: dioctylphthalate, diisobutilphthalate, BPA, benzoic acid, palmitic acid and diisopentylphthalate. The methods are very simple, rapid and selective, for plasticizers extraction from landfill leachate matrices.     

Cover crops and natural vegetation mulch effect achieved by mechanical management with lateral rotary mower in weed population dynamics in citrus

The aim of this study was to obtain information on practical weed management in order to reduce the use of herbicides thereby contributing to the sustainable development of citrus crop. The experiment was carried out under field conditions at the experimental area of the Department of Vegetal Production at the College of Agriculture "Luiz de Queiroz," Piracicaba, SP, Brazil, during the season 2002-2003. Influence of mulches produced by four types of vegetations on the dynamic population of weeds in the line of citrus crop (Citrus sinensis (L.) Osbeck) was evaluated. The experimental design was of factorial randomized blocks (4 x 2), where the treatments were: (i) four types of vegetation: Dolichos lablab L., Cajanus cajan (L.) Millsp, Penisetum glaucum (L.) Leeke, and the natural infestation composed basically by Panicum maximum Jacq.; and (ii) two types of fertilization: directed under canopy and broadcast. Mechanical management of the different vegetations was accomplished using a lateral rotary mower, KAMAQ, I model NINJA MAC 260, projected to release the green cut material under crop canopy, forming a mulch layer. The studied parameters were: (i) counting of weeds per m2 in the crop line after 30, 60, 90, 180, and 210 days following the cutting of existing vegetation; (ii) percentage of covered area by weeds; and (iii) some chemical properties of the soil. It was observed that the natural infestation showed a better weed control when compared with the other treatments, and that the broadcast fertilization, regardless of coverage used, presented a lower number of weeds.     

Allelopathic potential and systematic evaluation of organic extracts from Canavalia ensiformis leaves (Jack beans)

This article describes the assessment of possible allelopathic potential of organic extracts obtained from leaves of Canavalia ensiformis under laboratory conditions. Furthermore, a systematic evaluation of these extracts was carried out using specific protocols developed in capillary electrophoresis (CE) to determine some groups of secondary metabolites. After the identification and quantification of compounds, the effects of compounds on germination of some common weeds was investigated, which are becoming a real problem in pastures in the state of Pará, Brazil.