Delineation of potential ground water-bearing zones in the Barind tract of West Bengal,India

The Barind tract of West Bengal is an area of tropical sub-humid region composed of old alluvial soil. The area has high water demand due to growing population pressure and intensification in agricultural activity. These create huge stress on surface and ground water availability. Continuous withdrawal of ground water has become an alternative source of irrigation water which has also again made the condition critical. Ground water level has been lowered down drastically in many parts in this region. Under this circumstance, it is necessary to delineate potential ground water-bearing layers. Therefore, the present study attempts to identify potential ground water-bearing zones to manage ground water effectively. Instead of usually used parameters for ground water potentiality delineation here only some particular litholog parameters like breadth of water-bearing layer, depth of water-bearing layer, presence of clay layer above or below major water-bearing layer have been considered for delimiting the same. The result shows that out of total area, 60% area (405,382.2 ha) falls under very low to low potential ground water-bearing zone and only 8.19% area (55,634.97 ha) is potential. Considering this spatial pattern of ground water availability, harvesting structure and magnitude of water withdrawing should be designed.     

Developing biodiversity indicators on a stakeholders’ opinions basis: the gypsum industry Key Performance Indicators framework

This study aims to establish a common Key Performance Indicators (KPIs) framework for reporting about the gypsum industry biodiversity at the European level. In order to integrate different opinions and to reach a consensus framework, an original participatory process approach has been developed among different stakeholder groups: Eurogypsum, European and regional authorities, university scientists, consulting offices, European and regional associations for the conservation of nature, and the extractive industry. The strategy is developed around four main steps: (1) building of a maximum set of indicators to be submitted to stakeholders based on the literature (Focus Group method); (2) evaluating the consensus about indicators through a policy Delphi survey aiming at the prioritization of indicator classes using the Analytic Hierarchy Process method (AHP) and of individual indicators; (3) testing acceptability and feasibility through analysis of Environmental Impact Assessments (EIAs) and visits to three European quarries; (4) Eurogypsum final decision and communication. The resulting framework contains a set of 11 indicators considered the most suitable for all the stakeholders. Our KPIs respond to European legislation and strategies for biodiversity. The framework aims at improving sustainability in quarries and at helping to manage biodiversity as well as to allow the creation of coherent reporting systems. The final goal is to allow for the definition of the actual biodiversity status of gypsum quarries and allow for enhancing it. The framework is adaptable to the local context of each gypsum quarry.     

Modelling the Balance of Metals in the Amended Soil for the Case of ‘Atmosphere–Plant–Soil’ System

Changing the concepts of economic development and introducing new amendments can hardly decrease the accumulation in the soil of such pollutants as metals, remaining there for a long time. The predictive models for describing the balance of metals in the soil, which are based on the ‘atmosphere–plant–soil’ system and reflect the complicated physical–chemical nature of the metals’ migration, expressed by coefficients obtained in long-term observations in natural conditions, allow for evaluating long-term concentration of metals in the soil. The model BALANS evaluates self-purification of soil, taking into account the uptake of metals of aerogenic origin by the soil together with amendments, their physical–chemical migration and the type of microrelief determining its intensity as well as the absorbed biomass of plants and the removal of metals with crops. In this model, the half-period of metals’ washing out from the soil, found for the microrelief characteristic of low places, exceeds 200 years for Ni, Cr and Pb and makes 90 and 150 years for Zn and Cu, respectively.     

Occurrence of naproxen,ibuprofen, and diclofenac residues in wastewater and river water of KwaZulu-Natal Province in South Africa

The present paper reports a detailed study that is based on the monitoring of naproxen, ibuprofen, and diclofenac in Mbokodweni River and wastewater treatment plants (WWTPs) located around the city of Durban in KwaZulu-Natal Province of South Africa. Target compounds were extracted from water samples using a multi-template molecularly imprinted solid-phase extraction prior to separation and quantification on a high-performance liquid chromatography equipped with photo diode array detector. The analytical method yielded the detection limits of 0.15, 1.00, and 0.63 μg/L for naproxen, ibuprofen, and diclofenac, respectively. Solid-phase extraction method was evaluated for its performance using deionized water samples that were spiked with 5 and 50 μg/L of target compounds. Recoveries were greater than 80% for all target compounds with RSD values in the range of 4.1 to 10%. Target compounds were detected in most wastewater and river water samples with ibuprofen being the most frequently detected pharmaceutical. Maximum concentrations detected in river water for naproxen, ibuprofen, and diclofenac were 6.84, 19.2, and 9.69 μg/L, respectively. The concentrations of target compounds found in effluent and river water samples compared well with some studies. The analytical method employed in this work is fast, selective, sensitive, and affordable; therefore, it can be used routinely to evaluate the occurrence of acidic pharmaceuticals in South African water resources.     

Biodegradation characteristics of organic matters in swine carcasses under different initial operating conditions of simulated anaerobic lysimeter

This study was aimed to investigate the biodegradation characteristics of organic matters in swine carcasses. The lysimeters were simulated with different initial operating conditions: 30 % volumetric moisture content and no sludge addition for lysimeter A (control), 30 % volumetric moisture content and anaerobic sludge addition for lysimeter B, and 40 % volumetric moisture content and anaerobic sludge addition for lysimeter C. The degradation efficiency (18.4 %) of lysimeter B was higher than that (15.2 %) of lysimeter A due to anaerobic sludge addition. Lysimeter B showed higher CH₄ yield (15.6 L/kg VS) and CH₄ production rate (0.41 L/kg VS days) compared to lysimeter A by 31 % and 14 %, respectively. In addition, the degradation efficiency improved from 18.4 % (lysimeter B) to 26.3 % (lysimeter C) by increasing volumetric moisture content. The CH₄ yield (22.9 L/kg VS) and CH₄ production rate (0.68 L/kg VS days) of lysimeter C were higher than those of lysimeter B, respectively. Total organic carbon (TOC) removed in lysimeter C was converted to leachate (20.3 %) and gas (6.0 %), whose values were higher than those of lysimeter A and B. These results demonstrated that the proper control of initial operating conditions could accelerate the anaerobic degradation of organic matters in swine carcasses.     

<Emphasis Type="Italic">Synechococcus</Emphasis> production and grazing loss rates in nearshore tropical waters

Temporal variation of Synechococcus, its production (μ) and grazing loss (g) rates were studied for 2 years at nearshore stations, i.e. Port Dickson and Port Klang along the Straits of Malacca. Synechococcus abundance at Port Dickson (0.3–2.3 × 10⁵ cell ml^?1) was always higher than at Port Klang (0.3–7.1 × 10⁴ cell ml^?1) (p < 0.001). μ ranged up to 0.98 day^?1 (0.51 ± 0.29 day^?1), while g ranged from 0.02 to 0.31 day^?1 (0.15 ± 0.07 day^?1) at Port Klang. At Port Dickson, μ and g averaged 0.47 ± 0.13 day^?1 (0.29–0.82 day^?1) and 0.31 ± 0.14 day^?1 (0.13–0.63 day^?1), respectively. Synechococcus abundance did not correlate with temperature (p > 0.25), but nutrient and light availability were important factors for their distribution. The relationship was modelled as log Synechococcus = 0.37Secchi ? 0.01DIN + 4.52 where light availability (as Secchi disc depth) was a more important determinant. From a two-factorial experiment, nutrients were not significant for Synechococcus growth as in situ nutrient concentrations exceeded the threshold for saturated growth. However, light availability was important and elevated Synechococcus growth rates especially at Port Dickson (F = 5.94, p < 0.05). As for grazing loss rates, they were independent of either nutrients or light intensity (p > 0.30). In nearshore tropical waters, an estimated 69 % of Synechococcus production could be grazed.     

Mobility of free surface in different liquids and its influence on water striders locomotion

Dynamics of the surface layer in different liquids is examined by means of infrared thermography of the surface and simultaneous velocity fields measurements using surface and infrared Particle Image Velocimetry. This technique allows measurements and comparison of two velocity fields—at the surface and at small depth about 50–200 μm. In distilled water the velocity fields at the surface and at small depth exhibit significant dissimilarity. The flow field below the surface is essentially 3D, whereas the surface flow is characterized by vanishing 2D divergence of velocity, indicating predominantly planar motion. In contrast, in ethanol–butanol mixture two velocity fields are well correlated, both corresponding to 3D flow with continuous surface renewal. Thermal patterns, observed at the surface, and the flow field structure in different liquids are associated with different boundary conditions for velocity at the surface. Water surface is seldom renewed, which inhibits heat and mass exchange between the liquid and atmosphere. However, absence of vertical advection also enables organisms to live within the surface layer, to stand and walk on the free surface. This is illustrated by the difficulties a water strider faces on the surface of ultrapure water, which exhibits Marangoni convection.     

Assessing relative vulnerability to sea-level rise in the western part of the Mekong River Delta in Vietnam

The Mekong River Delta in Vietnam plays a crucial role for the region in terms of food security and socioeconomic development; however, it is one of the most low-lying and densely populated areas in the world. It is vulnerable to seawater incursion, flood risk, and shoreline change, exacerbated as a consequence of sea-level rise (SLR) related to climate change. This study examined the Kien Giang coast in the western part of the delta, comprising seven coastal districts (namely Ha Tien, Kien Luong, Hon Dat, Rach Gia, Chau Thanh, An Bien, and An Minh), the economy of which is important in terms of agriculture and aquaculture. The analytical hierarchical process (AHP) method of multi-criteria decision making was integrated directly into geographic information systems (GIS) to derive a composite vulnerability index that indicated areas most likely to be vulnerable to SLR. The hierarchical structure comprised three key components: exposure (E), sensitivity (S), and adaptive capacity (A), at level 1. At the next level, 8 sub-components were mapped: seawater incursion, flood risk, shoreline change, population characteristics, land use/land cover, and socioeconomic, infrastructure, and technological capability, beyond which a further 22 variables (level 3) and 24 sub-variables (level 4) related to vulnerability were also mapped. Variables were assigned weights for incorporation into AHP pairwise comparisons after discussion with stakeholders. Maps were generated to visualise areas where the relative vulnerability was very low, low, moderate, high, and very high. Societal data were generally only available at district level; however, several regional patterns emerged. Relatively high exposure to flooding and inundation, salinity, and moderate loss of mangroves occurred along the coastal fringe of each district. This western section of the delta, which is low-lying and remote from the distributaries that carry sediment to the coast, appears to be particularly vulnerable. The most sensitive areas tended to be ethnic households engaged in rice cultivation and with moderate population density. The least adaptable areas consisted of high numbers of poor households, with low income, and moderate densities of transport, irrigation and drainage systems. Most coastal districts were determined to be moderately to relatively highly vulnerable, with scattered hotspots along the coast.     

Effects of soil moisture depletion on vegetable crop uptake of pharmaceuticals and personal care products (PPCPs)

Agricultural crops have a long history of being irrigated with recycled wastewater (RW). However, its use on vegetable crops has been of concern due to the potential prevalence of microcontaminants, such as pharmaceuticals and personal care products (PPCPs) in the latter, which represents a possible health hazard to consumers. We investigated the uptake of three PPCPs (atenolol, diclofenac, and ofloxacin), at three different concentrations in irrigation water (0.5, 5, and 25 μg L^?1) in relation to three varying volumetric soil moisture depletion levels of 14 % (?4.26 kPa), 10 % (?8.66 kPa), and 7 % (?18.37 kPa) by various vegetable crop species. Experiments were conducted in a split-split block completely randomized design. PPCPs were extracted using a developed method of accelerated solvent extraction and solid phase extraction and analyzed via liquid chromatography mass spectrometry (LCMS). Results indicate that all treated crops were capable of PPCP uptake at nanogram per gram concentrations independent of the applied soil moisture depletion levels and PPCP concentrations. Ofloxacin was the chemical with the highest uptake amounts, followed by atenolol and then diclofenac. Although the results were not statistically significant, higher concentrations of PPCPs were detected in plants maintained under higher soil moisture levels of 14 % (?4.26 kPa).