Teil I: Stoffstromanalysen landwirtschaftlicher Produktionsverfahren

When discussing strategies for realising an environmental friendly agricultural production, there are methods for quantifying environmental effects which do not originate in agricultural contexts. For instance, the methodology of Life Cycle Assessment is mainly developed from analyses of industrial production lines and products. Substance flow analyses in agriculture contain a complete analysis of agriculturally caused substance and energy flows, to which certain environmental effects are assigned, and also an assessment of these effects. For the provision of production means, balancing agricultural production procedures includes the extraction of energy sources and mineral resources from their reservoirs. The growth phase of the crops regarded (cereals, sugar beet, rape) is described depending on the nutrients nitrogen, phophor, potassium and calcium. The nitrogen flux within the system plant-soil-atmosphere is recorded referring to its temporal dynamic. In the framework of this study, selected environmental effects of agricultural production procedures of winter wheat are calculated regarding different conditions of locations and are supplemented by declining scenario simulations. Essential features of the structure of the substance flow net, which is implemented for the calculation and which can be used completely or as for single modules for further studies, are explained. Basing on selected categories of effectiveness, ecological optimisation potentials of varying agricultural provision of production means and procedures are estimated within the whole context of provision. Thereby, the effects of a reduced employment of fertilisers, of a change as for the kind of fertiliser and of the region of origin of the N-fertiliser, as well as variations concerning mechanical work in the fields are outlined for the cultivation of winter wheat.     

Growth and development rates of Calanus finmarchicus nauplii during a diatom spring bloom

Growth and development rates were determined for nauplii of Calanus finmarchicus (Gunnerus) in the near-shore waters of a western Norwegian fjord from in situ mesocosm incubations. The major food source for the nauplii was diatoms, but Phaeocystis sp., dinoflagellates and ciliates were also part of the diet. At local temperatures ranging from 4.8 to 5.2 °C the cumulative median development time from hatching to Nauplius VI was 19 d. The time taken to molt to the next naupliar stage was approximately constant (3 d) from Stages IV to VI, but Stage III needed the longest development time (5 d). The instantaneous growth rate in terms of body carbon was negative from hatching to Nauplius Stage II, but as high as 0.25 to 0.30 d⁻¹ from Stage III to V. Enhancement of food resources by nutrient addition led to no significant change in specific growth rates. Additionally, the cohorts from different nutrient regimes showed almost equal development time, size and body carbon within stages. Length–weight relationships of nauplii from the two different food resources were: W _{low resources} = 4.17 × 10⁻⁶ × L ^2.03 (r ² = 0.84) and W _{high resources} = 4.29 × 10⁻⁶ × L ^2.05 (r ² = 0.92), where weight (W) is in micrograms of C and body length (L) in micrometers. The natural body morphology of naupliar stages I to VI is illustrated with digital images, including the final molt from Nauplius VI to Copepodid Stage I. In general, development of the nauplii was faster than that of the copepodids of C. finmarchicus, and structural growth was exponential from naupliar stages III to VI. This study validates our earlier results that nauplii of C. finmarchicus can obtain high growth and nearly maximal developmental rates at relatively low food levels (∼50 μg C l⁻¹), suggesting that nauplii exhibit far less dependence on food supply than copepodids. Received: 30 July 1999 / Accepted: 7 March 2000     

Composition of source-sorted municipal organic waste collected in Danish cities

Source-sorted municipal organic waste from different dwelling types in five Danish cities was sampled during one year. The samples were from permanent, full-scale systems or temporary, experimental systems for collection of source-sorted municipal organic waste. Pre-treatment of the organic waste prior to biological treatment was used in all cities to remove foreign objects and provide size reduction. All sampling was performed after pre-treatment in order to obtain more homogeneous and representative samples. The sampling included both the pre-treated waste and the reject from the pre-treatment allowing for estimation of the composition of the original waste. A total of 40 waste samples were chemically characterised with respect to 15 parameters. The waste generally consisted of around 88% VS of which an average of 80% was easily degradable. The average content of N, P and K in the dry matter of the organic waste was 2.5%, 0.4% and 0.9%, respectively. A general analysis of variance was applied to show the influence of the collection system, dwelling type and annual season on the waste composition. The content of plastic and crude fibres in the waste differed the most among the samples, probably due to use of different bag types (plastic and paper) in the different collection systems. Variations in the ash content and the calorific value might be explained by differences in the sorting instructions (whether soil and cat litter are allowed in the organic fraction). Significant seasonal variations were seen for ash, S and Cl. Dwelling type showed no statistically significant influence on any waste components. A test for uniform distribution of the p-values from the analysis of variance (Kolmogorov-Smirnov test) showed that the overall composition of the collected waste was strongly affected by the collection system (city) and season, while dwelling type had no significant influence.     

Methane yield in source-sorted organic fraction of municipal solid waste

Treating the source-separated organic fraction of municipal solid waste (SS-OFMSW) by anaerobic digestion is considered by many municipalities in Europe as an environmentally friendly means of treating organic waste and simultaneously producing methane gas. Methane yield can be used as a parameter for evaluation of the many different systems that exist for sorting and pre-treating waste. Methane yield from the thermophilic pilot scale digestion of 17 types of domestically SS-OFMSW originating from seven full-scale sorting systems was found. The samples were collected during 1 year using worked-out procedures tested statistically to ensure representative samples. Each waste type was identified by its origin and by pre-sorting, collection and pre-treatment methods. In addition to the pilot scale digestion, all samples were examined by chemical analyses and methane potential measurements. A VS-degradation rate of around 80% and a methane yield of 300-400Nm(3) CH(4)/ton VS(in) were achieved with a retention time of 15 days, corresponding to approximately 70% of the methane potential. The different waste samples gave minor variation in chemical composition and thus also in methane yield and methane potential. This indicates that sorting and collection systems in the present study do not significantly affect the amount of methane produced per VS treated.     

CFD model simulation of dispersion from chlorine railcar releases in industrial and urban areas

To assist in emergency response decisions and planning in case of releases of pressurized liquefied chlorine from railroad tank cars in industrial sites and cities, the FLACS Computational Fluid Dynamics (CFD) model has been used to simulate the transport and dispersion of the dense chlorine cloud. Two accident locations are studied: an actual railcar accident at an industrial site in Festus, MO, and a hypothetical railcar accident at a rail junction in the Chicago urban area. The results show that transport of a large dense gas release at ground level in an industrial site or large city could initially extend a hundred meters or more in the upwind and crosswind directions. The dense cloud may follow terrain drainage, such as river channels. Near the source, the obstacles tend to slow down the dense gas cloud and may constrain it and cause increased concentrations. Farther downwind, the obstacles may cause enhanced mixing and dilution once the cloud has grown larger. In some cases, significant amounts of cloud mass may become “trapped” in obstacle wakes for many minutes after the main cloud has passed. Although the CFD model can account for the details of the flow and dispersion much better than standard widely-used simple dense gas models, many similarities are found among the various models in their simulated variations with downwind distance of the maximum cloud centerline concentration.     

Microbial degradation pathways of the herbicide dichlobenil in soils with different history of dichlobenil-exposure

This is the first detailed study of metabolite production during degradation of the herbicide 2,6-dichlorobenzonitrile (dichlobenil). Degradation of dichlobenil and three potential metabolites: 2,6-dichlorobenzamide (BAM), 2,6-dichlorobenzoic acid (2,6-DCBA) and ortho-chlorobenzamide (OBAM) was studied in soils either previously exposed or not exposed to dichlobenil using a newly developed HPLC method. Dichlobenil was degraded in all four soils; BAM and 2,6-DCBA were only degraded in soils previously exposed to dichlobenil (100% within 35-56 days and 85-100% in 56 days, respectively), and OBAM in all four soils (25-33% removal in 48 days). BAM produced from dichlobenil was either hydrolyzed to 2,6-DCBA or dechlorinated to OBAM, which was further hydrolyzed to ortho-chlorobenzoic acid. BAM was rapidly mineralized in previously exposed soils only. All potential metabolites and the finding that BAM was a dead-end metabolite of dichlobenil in soils not previously exposed to dichlobenil needs to be included in risk assessments of the use of dichlobenil.     

Do males and females differ in the feeding of large and small siblings? An experiment with the bluethroat

Males and females have been reported to differ in their feeding of large and small siblings in several species of birds. According to recent hypotheses, this phenomenon may be related to a sexual conflict over avian hatching patterns. We designed an experiment to test for the existence of such a sex difference by manipulating nestling size hierarchies of the bluethroat (Luscinia s. svecica) in two directions; half the broods were “asynchronized” to yield large size-differences within broods and the other half were “synchronized” to yield small size-differences. In all broods, nestlings were categorized as being either large or small according to body mass. We recorded male and female food distribution by video early (day 4 after hatching) and late (day 8) in the nestling period. Males and females did not differ in their distribution of food among different-sized nestlings. With large size-differences, both males and females fed large nestlings nearly twice as often as small ones. In contrast, when the size-differences were small, food was more evenly distributed among nestlings. Early in the nestling period, males fed more nestlings during each feeding visit than did females. Our finding that male and female bluethroats do not differ in the feeding of large and small siblings is in contrast to most previous studies. Variation in costs and benefits to males and females from feeding different-sized nestlings, and restrictions to parental choice due to nestling interactions, may explain interspecific variation. Received: 27 June 1997 / Accepted after revision: 26 January 1998     

Odor and Fallout Control in a Kraft Pulp Mill

Lead dioxide cylinders are inexpensive sampling devices commonly used for an assessment of sulfur oxides in the atmosphere. This paper will report the results of basic studies intended to characterize some of the critical parameters of this method. The behavior of the system in the region of the critical loading percentages was determined as well as the effects of lead dioxide particle size, presence of reduced sulfur compounds, and use of different binders. From these studies it has been possible to show a definite relationship between allowable exposure times and atmospheric concentrations of sulfur dioxide with particle size as a major parameter     

The use of environmental metabolomics to determine glyphosate level of exposure in rapeseed (Brassica napus L.) seedlings

Metabolic profiling in plants can be used to differentiate between treatments and to search for biomarkers for exposure. A methodology for processing Ultra-High-Performance Liquid Chromatography-Diode-Array-Detection data is devised. This methodology includes a scheme for selecting informative wavelengths, baseline removal, retention time alignment, selection of relevant retention times, and principal component analysis (PCA). Plant crude extracts from rapeseed seedling exposed to sublethal concentrations of glyphosate are used as a study case. Through this approach, plants exposed to concentrations down to 5 μM could be distinguished from the controls. The compounds responsible for this differentiation were partially identified and were different from those specific for high exposure samples, which suggests that two different responses to glyphosate are elicited in rapeseed depending on the level of exposure. The PCA loadings indicate that a combination of other metabolites could be more sensitive than the response of shikimate to detect glyphosate exposure.     

Simulating Unstressed Crop Development and Growth Using the Unified Plant Growth Model (UPGM)

Since initial development of the EPIC model in 1989, the EPIC plant growth component has been incorporated into other erosion and crop management models (e.g., WEPS, WEPP, SWAT, ALMANAC, and GPFARM) and subsequently modified to meet research objectives of the model developers. This has resulted in different versions of the same base plant growth component. The objectives of this study are the following: (1) describe the standalone Unified Plant Growth Model (UPGM), initially derived from the WEPS plant growth model, to be used for merging enhancements from other EPIC-based plant growth models; and (2) describe and evaluate new phenology, seedling emergence, and canopy height sub-models derived from the Phenology Modular Modeling System (PhenologyMMS V1.2) and incorporated into UPGM. A 6-year (2005–2010) irrigated maize (Zea mays L.) study from northeast Colorado was used to calibrate and evaluate UPGM running both the original (i.e., based on WEPS) and new phenology, seedling emergence, and canopy height sub-models. Model statistics indicated the new sub-models usually resulted in better simulation results than the original sub-models. For example when comparing original and new sub-models, respectively, for predicting canopy height, the root mean square error (RMSE) was 53.7 and 40.7 cm, index of agreement (d) was 0.84 and 0.92, relative error (RE) was 26.0 and ?1.26 %, and normalized objective function (NOF) was 0.47 and 0.33. The new sub-models predict leaf number (old sub-models do not), with mean values for 4 years of 2.43 leaves (RMSE), 0.78 (d), 18.38 % (RE), and 0.27 (NOF). Simulating grain yield, final above ground biomass, and harvest index showed little difference when running the original or new sub-models. Both the new phenology and seedling emergence sub-models respond to varying water deficits, increasing the robustness of UPGM for more diverse environmental conditions. Future research will continue working to incorporate existing enhancements from other EPIC-based plant growth models to unify them into one model such as multispecies competition and N cycling.