Modified biochar from Moringa seed powder for the removal of diclofenac from aqueous solution

Environmental Science and Pollution Research - In this study, Moringa seed powder (MSP) was pyrolyzed at 450 °C to synthesize Moringa seed powder biochar (MSPB) and treated with phosphoric...     

Development of ELISA technique for the analysis of atrazine residues in water

A highly sensitive enzyme immunoassay is described for the detection of atrazine residues in water. Atrazine derivative was conjugated to Bovine Serum Albumin (BSA) to obtain an immunizing antigen and to Horseradish Peroxidase enzyme (POD) to obtain a marker for immunoassay. The formation of these conjugations was confirmed by UV spectroscopy as well as by gel-electrophoresis. Polyclonal antibodies were raised in rabbits by immunization with an atrazine-BSA conjugate containing 29 atrazine residues per BSA molecule. An ELISA on microtitration plates was optimized with peroxidase-atrazine conjugate. The middle of the test (50% B/Bo) was found to be at 90 ng/l, which is well below the maximum concentration permitted by the EC guidelines for drinking water. Detection limits for atrazine of about 1 ng/l could be reached. The assay did not require concentration or cleanup steps for drinking or ground water samples. Validation experiments showed good accuracy and precision. No cross-reactivities were shown by other s-triazines like terbutryn, ametryn, terbuthylazine, des-isopropylatrazine, and de-ethylatrazine except hydroxyatrazine. The latter was present at very low levels that can be calibrated/standardized before analysis or it may be considered as leftover residues of atrazine. Based on these results, it is suggested that this test can be applied to obtain fairly accurate results for atrazine concentration in water samples from different sources.     

Monitoring the impact of urban effluents on mineral contents of water and sediments of four sites of the river Ravi, Lahore

We assessed the impact of urban effluents on the concentrations of selected minerals (Cd, Cr, Cu, Fe, Pb, Zn, Mn, Ni, and Hg) in river Ravi before and after its passage through Lahore city. Water and sediment samples were collected from three lowly to highly polluted downstream sites (Shahdera (B), Sunder (C), and Balloki (D)) alongside the least polluted upstream site (Siphon (A)) during high and low river flow seasons. All the mineral concentrations increased up to site C but stabilized at site D, showing some recovery as compared to the third sampling site. The trend of mean mineral concentration was significantly higher during the low than the high flow season at all the sites. The mean Hg concentrations approached 0.14 and 0.12 mg/l at site A which increased (%) up to 107 and 25 % at site B, 1,700 and 1,317 % at site C, and 1,185 and 1,177 % at site D during low and high river flows, respectively. All mineral concentrations were much higher in the sediment than the water samples. Mean Cd (917 %), Cr (461 %), Cu (300 %), Fe (254 %), Pb (179 %), Zn (170 %), Mn (723 %), Ni (853 %), and Hg (1,699 %) concentrations were higher in riverbed sediments sampled from site C in comparison with the sample collected at site A during low flow season. The domestic and industrial discharges from Lahore city have created undesirable water qualities during the low river flow season. As majority of the mineral levels in the river Ravi were higher than the permissible and safe levels, this is of immediate concern for riverine fish consumers and the users of water for recreation and even irrigation. The use of these waters may pose health risks, and therefore, urgent intervention strategies are needed to minimize river water pollution and its impact on fish-consuming communities of this study area and beyond.     

Amelioration of toxicopathological effects of cadmium with silymarin and milk thistle in male Japanese quail (Coturnix japonica)

Environmental Science and Pollution Research - Cadmium is an important widely distributed heavy metal in the environment due to its several industrial uses, while milk thistle is an important herb...     

A stochastic approach for the operation of a wind and pumped storage plant under a deregulated environment

To improve the competiveness in the energy market, it is necessary that the wind power plants provide guaranteed power generation, although, it is not possible to forecast power availability from wind power plant accurately. This paper presents a stochastic model and solution technique for the combined operation of wind and pumped storage power plants to improve the power availability and increasing the profit considering uncertainties of wind power generation. In this model, uncertainties in wind data have been forecasted for grid connected day-ahead market using Weibull distribution model. The imbalances in the forecasted wind data and the market demand have been reduced by operating the pumped storage power plant. In this stochastic mixed integer problem, pumped storage plant can take the supply either from the grid or from the wind power plant for the pumping operation to store the energy in order to utilize this energy during peak hours for increasing the overall revenue. The reliability of the pumped storage is improved by replacing the conventional unit with the adjustable speed type pumped storage unit. In order to prove the optimality of the solution, two case studies were considered. In case study–I, scheduling is provided by operating the conventional pumped storage unit, whereas in case study–II, adjustable speed pumped storage unit has been used. It has been found that the adjustable speed pumped storage unit has further reduced the imbalance between generated power and demand. The complete approach has been formulated and implemented using AMPL software.     

Oil spill cleanup using graphene

In this article, we study the use of thermally reduced graphene (TRG) for oil spill cleanup. TRG was synthesized by thermal exfoliation of graphite oxide and characterized by X-ray diffusion, Raman spectroscopy, SEM, TEM, elemental analysis, and Brunauer–Emmett–Teller (BET) surface area measurement. Various aspects of the sorption process have been studied including the sorption capacity, the recovery of the adsorbed oil, and the recyclability of TRG. Our results shows that TRG has a higher sorption capacity than any other carbon-based sorbents, with sorption capacity as high as 131 g of oil per gram TRG. With recovery of the sorbed oil via filtration and reuse of TRG for up to six cycles, 1 g of TRG collectively removes approximately 300 g of crude oil. Moreover, the effects of TRG bulk density, pore volume, and carbon/oxygen ratio and the oil viscosity on the sorption process are also discussed.     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.     

Enhanced uptake of Cd,Cr, and Cu in Catharanthus roseus (L.) G.Don by Bacillus cereus: application of moss and compost to reduce metal availability

Environmental Science and Pollution Research - Heavy metals (HMs) being the notorious and toxic are being introduced into the environment credited to natural and anthropogenic activities. The use...