Evaluation of dispersion methods for enumeration of microorganisms from peat and activated carbon biofilters treating volatile organic compounds

To enumerate microorganisms having colonized biofilters treating volatile organic compounds, it is necessary firstly to evaluate dispersion methods. Crushing, shaking and sonication were then tested for the removal of microflora from biofilters packing materials (peat and activated carbon). Continuous or discontinuous procedures, and addition of glass beads had no effect on the number of microorganisms removed from peat particles. The duration of treatment also had no effect for shaking and crushing, but the number of microorganisms after 60 min of treatment with ultrasound was significantly higher than that obtained after 0.5 min. The comparison between these methods showed that crushing was the most efficient for the removal of microorganisms from both peat and activated carbon. The comparison between three chemical dispersion agents showed that 1% Na-pyrophosphate was less efficient, compared with 200 mM phosphate buffer or 1% Na-hexametaphosphate. To optimize the cultivation of microorganisms, three different agar media were compared. Tryptic soy agar tenfold diluted (TSA 1/10) was the most suitable medium for the culture of microflora from a peat biofilter. For the activated carbon biofilter, there was no significant difference between Luria Bertoni, TSA 1/10, and plate count agar. The optimized extraction and enumeration protocols were used to perform a quantitative characterization of microbial populations in an operating laboratory activated carbon biofilter and in two parallel peat biofilters.     

Effect of metals on the adsorption and extractability of 14C-phenanthrene in soils

The fate of polycyclic aromatic hydrocarbons (PAHs) in contaminated soils may be affected by several environmental factors including the presence of co-contaminants. This study was conducted in order to assess the effect of metals on (i) the adsorption of 14C-phenanthrene in soils and (ii) its extractability and ability to form non-extractable residues. The first objective was accomplished using batch adsorption experiments with an uncontaminated agricultural soil spiked with the metals Cd, Cu, Pb, and Zn. Adsorption of phenanthrene was significantly higher after the addition of the metals (Kf = 21.48 vs. 8.55) and the desorption less readily reversible when compared to the unspiked soil. The extractability of phenanthrene was assessed with incubation (4 months, laboratory conditions) and microlysimeter experiments (6 months, natural climatic conditions) on three soils spiked with metals. All the soils were labelled with 14C-phenanthrene. The amount of extractable phenanthrene residues was significantly higher when the metals had been added to the soils. Nevertheless, the quantity of non-extractable residues was non-significantly different between the spiked and unspiked soils. The mechanism leading to increased adsorption and extractability of phenanthrene in the presence of metals is still unknown. In perspective, it would be interesting to assess the bioavailability of PAHs in the presence of metals in further experiments.     

Bioaugmentation with a Bacillus sp. to reduce the phytoavailable Cd of an agricultural soil: comparison of free and immobilized microbial inocula

In order to reduce the cadmium potentially available for plants, soil bioaugmentation was performed by using a Bacillus sp. In a pot experimentation, sterilized and non-sterilized soils were inoculated using free or immobilized cells entrapped in alginate beads. This test was carried out with different inoculum sizes (2 x 10(10) and 2 x 10(11)CFU kg(-1) dw of soil) and alginate bead compositions (10 and 15 g of both alginate and CaCl(2) l(-1)). Then, the soil pots were incubated at 20 degrees C and the soil humidity was kept at a level of 20%. After 3 weeks of a batch incubation, the potentially phytoavailable Cd was reduced up to a factor of 14. The bioaugmentation resulted in the soil colonization by Bacillus sp. thanks to an increase of the cell concentration up to 1.8 log units. However, in comparison to the cells being inoculated in a free mode, the immobilization of the cells did not significantly improve the survival of the cells in the soil. Although the resulting effect not being highly pronounced, the potentially phytoavailable Cd correlated with the cell concentration in a surprisingly positive way. What is more, the Bacillus concentrations in the soil were positively correlated with the inoculum, too.     

Modulation of individual behavior and collective decision-making during aggregation site selection by the ant<Emphasis Type="Italic"> Messor barbarus</Emphasis>

Insect societies are often confronted with choices among several options such as food sources of different richness or potential nest sites with different qualities. The mechanisms by which a colony as a whole evaluates these situations and takes the appropriate decision are of crucial importance for its survival. Here we studied how collective decisions arise from individual behaviors when a group of workers of the ant Messor barbarus is given a choice between two aggregation sites. Two hundred ants were introduced into an arena and given a choice between two tubes connected to the arena. The tubes had different physical properties: dry and transparent (termed as dry), humid and transparent (termed as humid), or dry and dark (termed as dark). After 30 min, most ants were found to be aggregated in a humid tube when paired with a dry tube, or in a dark tube when paired with a humid one. When two humid tubes were in competition, ants aggregate more in one of the sites. The choice of ants was consistent throughout experiments. An analysis of individual behaviors shows that the probability of an ant recruiting and the intensity of its trail-laying behavior strongly depend on the quality of the tubes. Our study suggests that the selection of an aggregation site does not require that individual ants directly compare sites, but rather relies on the synergy between amplification processes involving recruitment by chemical trails, and a modulation of the individual resting time in a site as a function of its population.Communicated by L. Sundström     

Invasion and eradication of a competitively superior species in heterogeneous landscapes

The effect of heterogeneous environments upon the dynamics of invasion and the eradication or control of invasive species is poorly understood, although it is a major challenge for biodiversity conservation. Here, we first investigate how the probability and time for invasion are affected by spatial heterogeneity. Then, we study the effect of control program strategies (e.g. species specificity, spatial scale of action, detection and eradication efficiency) on the success and time of eradication. We find that heterogeneity increases both the invasion probability and the time to invasion. Heterogeneity also reduces the probability of eradication but does not change the time taken for successful eradication. We confirm that early detection of invasive species reduces the time until eradication, but we also demonstrate that this is true only if the local control action is sufficiently efficient. The criterion of removal efficiency is even more important for an eradication program than simply ensuring control effort when the invasive species is not abundant.     

On metapopulation resistance to drift and extinction

The spatial configuration of metapopulations (numbers, sizes, and localization of patches) affects their ability to resist demographic extinction and genetic drift, but sometimes with opposite effects. Small and isolated patches, for instance, contribute marginally to demography but may play a large role in genetics by maintaining a sizeable amount of genetic variance among demes. In source-sink systems, similarly, connectivity may be beneficial in terms of effective size, but detrimental in terms of survival, by lowering the reproductive value of source populations. How to reconcile these opposite effects? Here we propose an analytical framework that integrates fixation time (ability to resist genetic drift) and extinction time (ability to resist demographic extinction) into a single index of resistance, measuring the ability of a metapopulation to maintain its demo-genetic integrity. We then illustrate with numerical examples how conflicting demands may be resolved.     

Physicochemical and biological characterisation of different dredged sediment deposit sites in France

The aim of this work is to determine sediment properties, metal contents and transfers of Cd and Zn from dredged sediments to plants. To this end 10 deposit sites with different contexts were visited in France. The main agronomic characteristics and metal contents for surface soil layers were measured, the plant species present at the sites, such as Brassicaceae and Fabaceae, were listed, and the distribution of their root systems described. Soil characteristics such as available P (Olsen) varied between sites, with values ranging from 0.01 to 0.49 g kg(-1). Total contents and enrichment factors were studied, highlighting metal contamination in most of the sites. Despite carrying out principal component analyses, it was not possible to group deposits by age or geographical localisation. However, deposits could be distinguished as a function of proximity of industrial facilities, sediment grain size and carbonate content. Associations between metals were also highlighted: (1) Cd, Pb and Zn, and (2) Al, Cr, Cu and Fe. Consequently, we propose classifying them as technogenic anthrosols.     

Biological treatment process of air loaded with an ammonia and hydrogen sulfide mixture

The physico-chemical characteristics of granulated sludge lead us to develop its use as a packing material in air biofiltration. Then, the aim of this study is to investigate the potential of unit systems packed with this support in terms of ammonia and hydrogen sulfide emissions treatment. Two laboratory scale pilot biofilters were used. A volumetric load of 680 g H2S m(-3) empty bed day(-1) and 85 g NH3 m(-3) empty bed day(-1) was applied for eight weeks to a unit called BGSn (column packed with granulated sludge and mainly supplied with hydrogen sulfide); a volumetric load of 170 g H2S m(-3) empty bed day(-1) and 340 g NH3 m(-3) empty bed day(-1) was applied for eight weeks to the other called BGNs (column packed with granulated sludge and mainly supplied with ammonia). Ammonia and hydrogen sulfide elimination occur in the biofilters simultaneously. The hydrogen sulphide and ammonia removal efficiencies reached are very high: 100% and 80% for BGSn; 100% and 80% for BGNs respectively. Hydrogen sulfide is oxidized into sulphate and sulfur. The ammonia oxidation products are nitrite and nitrate. The nitrogen error mass balance is high for BGSn (60%) and BGNs (36%). This result could be explained by the denitrification process which would have occurred in anaerobic zones. High percentages of ammonia or hydrogen sulfide are oxidized on the first half of the column. The oxidation of high amounts of hydrogen sulfide would involve some environmental stress on nitrifying bacterial growth and activity.     

Tire blow-outs and motorway accidents

During the period from 1996 to 2002, 60,397 vehicles were involved in crashes with property damage and/or injury on a French motorway network of 2000 km. It was observed that 6.7% of these accidents involved tire blow-outs. In 87% of cases, only one vehicle was involved in the accident. Tire blow-outs occurred in 6.5% of cars that represented more than 80% of the vehicles involved in crashes. The occurrence of this phenomenon is very high for vans (22%), though it concerns trucks less (2.5%). The proportion of tire blow-outs decreased from 1997, when it was 8.0%, to 5.9% in 2002. However, two main facts require examination: (1) On inter-urban motorways, crashes involving blow-outs of rear tires occur four times more frequently than for blow-outs of front tires. (2) The frequency of tire blow-outs is especially high for vans, and almost always involves rear tires. This higher frequency for rear tires is the result of two phenomena, which are indistinguishable given the data available: firstly, a four-wheel vehicle is more difficult to control if a blow-out occurs on a rear tire (confirmed experimentally); secondly, rear tires may be in poor condition more often than front tires, and so more prone to blow-outs. Consequently, users are strongly recommended to install the best tires on rear wheels. In practice, if only the front tires are replaced, which often occurs because they tend to be worn out more quickly than the rear ones (especially for front wheel drive vehicles), it is necessary to move the rear tires to the front and fit the new ones on the rear wheels. Very interesting technological developments are in progress that should reduce the number of tire blow-outs. However, considering the time necessary to renew the number of cars on the roads, this very simple and inexpensive recommendation should apply to all cars and especially to vans.