Differences in morphology and habitat use among the native mussel <Emphasis Type="Italic">Mytilus trossulus</Emphasis>, the non-native <Emphasis Type="Italic">M. galloprovincialis,</Emphasis> and their hybrids in Puget Sound,Washington

Mytilus galloprovincialis (Mg), the Mediterranean blue mussel, is sympatric with the native M. trossulus (Mt) throughout much of the north Pacific, likely as the result of human introduction. We investigated the distribution of the two species and their hybrids (Mgt) in Puget Sound, Washington, to determine whether differences occur in habitat preference between the two species and hybrids. In addition, we investigated whether there were consistent size and shape differences between the native and introduced mussels and hybrids. Measurements of over 6,000 mussels from 30 sites, of which 1,460 were genotyped for a species-specific genetic marker, revealed that Mg and Mgt can be found throughout Puget Sound. Mg and Mgt were larger and exhibited a greater height:length ratio than Mt. Frequencies of Mg and Mgt were higher in subtidal habitats, such as docks, than on intertidal rocks, walls or pilings. Within intertidal habitats, Mg and Mgt were more frequent than Mt in the lower reaches of the intertidal. At slightly more than half the sites the frequency of the three genotypes accorded with random mating expectations suggesting no consistent barriers to gene flow between species. The standardized random sampling methods and simple morphometric identification techniques described here can be used to test whether the frequency of invasive mussels changes over time and space in Puget Sound.     

Impact of bias in predicted height on tree volume estimation: A case-study of intrinsic nonlinearity

Bias originating from intrinsic nonlinearity in nonlinear models is caused by excess curvature in the solution locus of parameter estimates derived from least squares procedures. Bias due to intrinsic nonlinearity varies according to sample size as well as model specification. This paper analyses consequences of fractionising data into smaller sub-samples. Based on measurements of stem diameter and total tree height from the first Danish national forest inventory, it is demonstrated how data splitting at random may cause the intrinsic nonlinear curvature to exceed the critical F-value. Application of a Taylor-series expansion shows that, for all practical purposes, the bias in predictions of individual tree volume (based on stem diameter and tree height) is negligible. To minimize residual variance, intrinsic curvature and, in turn, prediction bias, it is recommended that data be stratified according to site conditions, stand characteristics or other relevant criteria. Finally, the preferred model should exhibit close-to-linear behaviour.     

Driver Injury Risk Variability in Finite Element Reconstructions of Crash Injury Research and Engineering Network (CIREN) Frontal Motor Vehicle Crashes

Objective: A 3-phase real-world motor vehicle crash (MVC) reconstruction method was developed to analyze injury variability as a function of precrash occupant position for 2 full-frontal Crash Injury Research and Engineering Network (CIREN) cases.

Method: Phase I: A finite element (FE) simplified vehicle model (SVM) was developed and tuned to mimic the frontal crash characteristics of the CIREN case vehicle (Camry or Cobalt) using frontal New Car Assessment Program (NCAP) crash test data. Phase II: The Toyota HUman Model for Safety (THUMS) v4.01 was positioned in 120 precrash configurations per case within the SVM. Five occupant positioning variables were varied using a Latin hypercube design of experiments: seat track position, seat back angle, D-ring height, steering column angle, and steering column telescoping position. An additional baseline simulation was performed that aimed to match the precrash occupant position documented in CIREN for each case. Phase III: FE simulations were then performed using kinematic boundary conditions from each vehicle's event data recorder (EDR). HIC15, combined thoracic index (CTI), femur forces, and strain-based injury metrics in the lung and lumbar vertebrae were evaluated to predict injury.

Results: Tuning the SVM to specific vehicle models resulted in close matches between simulated and test injury metric data, allowing the tuned SVM to be used in each case reconstruction with EDR-derived boundary conditions. Simulations with the most rearward seats and reclined seat backs had the greatest HIC15, head injury risk, CTI, and chest injury risk. Calculated injury risks for the head, chest, and femur closely correlated to the CIREN occupant injury patterns. CTI in the Camry case yielded a 54% probability of Abbreviated Injury Scale (AIS) 2+ chest injury in the baseline case simulation and ranged from 34 to 88% (mean = 61%) risk in the least and most dangerous occupant positions. The greater than 50% probability was consistent with the case occupant's AIS 2 hemomediastinum. Stress-based metrics were used to predict injury to the lower leg of the Camry case occupant. The regional-level injury metrics evaluated for the Cobalt case occupant indicated a low risk of injury; however, strain-based injury metrics better predicted pulmonary contusion. Approximately 49% of the Cobalt occupant's left lung was contused, though the baseline simulation predicted 40.5% of the lung to be injured.

Conclusions: A method to compute injury metrics and risks as functions of precrash occupant position was developed and applied to 2 CIREN MVC FE reconstructions. The reconstruction process allows for quantification of the sensitivity and uncertainty of the injury risk predictions based on occupant position to further understand important factors that lead to more severe MVC injuries.     

Park isolation in anthropogenic landscapes: land change and livelihoods at park boundaries in the African Albertine Rift

Regional Environmental Change - Landscapes are changing rapidly in regions where rural people live adjacent to protected parks and reserves. This is the case in highland East Africa, where many...     

Water quality of runoff from revegetated mine spoil

Permanent vegetation plots were established on mixed overburden and topsoiled overburden on a lignite test pit in eastern Texas in 1982. Vegetative treatments included two grass-legume treatments [switchgrass (panicum virgattun) — sideoats grama (Bouteloua curtipendula) — subterrancan elover (Trifolitun subterranean) and litte bluestem (Schizachyriun scoparium) — sideoats grama (Bouteloua curtipendula) — Illinois hundleflower (Dessmanthus illinoiensis)] and three monocultures [Coastal bermudagrass (Cynodon dactylon), bahia grass (paspalum notatum) and yellow Indiangrass (Sorghastrum nutans)]. Water was applied to the 0.5m² plots using a sprinklertype rainfall simulator and quality of runoff was determined for each plot. Parameters analyzed included: settleable solids, total filterable solids, sediment production, infiltration rate, nitrites, nitrates, total iron and total manganese. Topsoiling significantly increased inliltration and significantly decreased filterable sediments, sediment production and settleable solids. The hydrologie qualities of the switchgrass-sideoats grama-subterranean elover mixture coincided closely with those of the Coastal bermudagrass monoculture.Authors are presently graduate research assistant and assistant professor. Range Science Department. Texas A&M University. College Station, Texas 77843. Acknowledgement is given to Northwestern Resources Co. for providing the funding for this project.     

Improving the sludge conditioning potential of moringa seed

In the search for a cheaper material to effectively condition sludge, oil-free moringa seed was prepared and tested. A Soxhlet apparatus was used to extract the oil from moringa seed (Moringa oleifera). The oil-free seed (marc) has been found to have higher conditioning potential than the ordinary moringa seed. However, the traditional ferric chloride is still a better sludge conditioner than moringa seed marc. For the digested domestic sludge used, optimum conditioning dosages were found to be 0.6, 0.80, and 1.10% of the total solids for ferric chloride, marc of the moringa seed, and ordinary moringa seed, respectively. Since little or no operational material is lost in the extraction process, the moringa seed marc is a promising conditioner in place of the ordinary seed.     

Market aspects in product life cycle inventory methodology

In planning a product life cycle inventory analysis, the correct choice of methodology often depends on market information. This paper discusses a number of points in the life cycle inventory methodology (choice of product alternatives, geographical system boundaries, technological levels and co-product allocation rules) where the market aspect becomes obvious and where a disregard for these aspects may lead to serious flaws in the results.     

Growth and mortality in young larval herring (Clupea harengus); effects of repetitive changes in food availability

Following yolk resorption, laboratory-reared larval Baltic herring (Clupea harengus L.) were exposed to two sequences of food restriction for 5 d and re-alimentation for 10 d. Comparisons regarding larval growth (standard length and content of water-soluble protein), mortality and content of the sum of trypsin and trypsinogen were made with larvae at a continuous high ration. Larvae exposed to varying prey abundance grew less in length than the control, and during the second high-ration period (Day 22 to 32) growth in length ceased. From the first low-ration period onwards, the content of water-soluble protein in these larvae was lower than that of the control larvae, and the survival rate of the low-high ration group was 59% compared to 77% in the larvae at a continuous high ration. In contrast, the effects of varying food availability were minor on larval content of trypsin and trypsinogen. Results are compared with previous findings in larval Clyde herring, and the effects of larval stock and timing and duration of food restriction on larval growth performance are discussed.     

Sustainable management of shellfish resources in Bandon Bay, Gulf of Thailand

Bandon Bay (Surat Thani Province) is one of the most productive coastal areas in southern Thailand. The Tapi River and 18 channels are the main sources of freshwater, nutrients, organic matter and sediment to the bay and the loading of freshwater and nutrients provide essential support for the production of phytoplankton in the estuarine ecosystem. Bandon Bay is important as natural spawning, nursery and feeding grounds for shellfish such as oysters, blood cockles, green mussels, short-necked clams, mud crabs and shrimps, and the estuary also serves as an excellent area for mariculturing of shellfish. In fact, oysters and blood cockles cultured in Bandon Bay are now being exported worldwide. However, Bandon Bay is also a textbook example of overexploitation of coastal resources in the tropics including all the derived changes in the estuarial ecosystem with severe socio-economic consequences. Hence, there is an urgent need for setting up an integrated management plant for a sustainable use of shellfish resources in Bandon Bay. The present study attempts to integrate water quality simulation results, socio-economic data and information on existing shellfish resource use in the process of proposing a set of sustainable management strategies for shellfish resources in Bandon Bay. These strategies involve: (1) using water quality modeling to monitor ecological and environmental changes in shellfish culture beds and their natural habitats in the process of setting up a master plan for management of waste water discharge into Bandon Bay; (2) zoning of shellfish mariculture in the coastal area in order to solve conflicts between resource users; (3) setting up a clear system for taxation of mariculture where the revenue may be used for (4) setting up and managing mangrove strips as filters of pollution and sediment around Bandon Bay; and finally (5) it is suggested to form a committee with members representing all relevant stakeholders plus the local government in order to work on resolving the existing and potential future conflicts over resource usage in Bandon Bay. This methodology may be seen as an important contribution towards a Bandon Bay sustainable management approach, based on the principles of integrated coastal zone management because it is science-based and takes into consideration the needs and perceptions of people involved in coastal resource extraction.