Cross-Media Environmental Impacts of Air Pollution Regulations for a Coal-Fired Power Plant

The types and rates of pollutant emissions from a coal-fired power plant depend upon plant design, coal characteristics, and environmental control policy. In the past, air pollution regulations were often promulgated without rigorous analysis of the resulting energy penalties and secondary environmental impacts that occur in other environmental media (air, land, or water), which are counterproductive to overall environmental quality. This paper describes a Comparative Assessment Model that has been developed to consider systematically such tradeoffs for conventional and advanced coal-to-electric technologies. The model is applied to quantify the secondary (“cross-media”) environmental and resource impacts resulting from alternative air pollution control policies that reduce sulfur dioxide emissions from a 1000 MW power plant. Multimedia pollutant burdens are presented, together with the increased requirements for coal, limestone, and water that are incurred in generating a fixed net quantity of electricity. The development of sound public policy requires that environmental regulations be sensitive to adverse effects in all environmental media, and that tradeoffs involved in the regulation of specific pollutants to one medium be rigorously and systematically characterized.     

Biogenic Sulfur Gas Emissions from Soils in Eastern and Southeastern United States

Data are presented for the first systematic measurements of biogenic sulfur gas flux from the major soil orders within the eastern and southeastern United States. Sulfur flux samples were collected and analyzed on-site during the fall of 1977, spring and summer of 1978 and summer of 1979. A total of 27 sampling locales in 17 states were examined. Eight additional sites were visited in 1980.

At some locales, two to four soils were examined, providing an even broader sampling of the soil orders. Three of the locales were revisited two or three times during the course of the study to establish the influence of seasonal climatology upon the measured emission rates and chemical composition of the sulfur flux mixtures.

The sulfur gas enhancement of sulfur-free sweep air passing through dynamic emission flux chambers placed over selected sampling areas was determined by combined cryogenic enrichment sampling and wall-coated, open tubular, capillary column, cryogenic gas chromatography (WCOT/GC) using a sulfur selective, flame photometric detector (FPD).

Sulfur gas mixtures varied with soil order, ambient temperature, insolation, soil moisture, cultivation, and vegetative cover. Statistical analyses indicated strong temperature and soil order relationships for sulfur emissions from soils.

Fluxes ranged from 0.001 g to 1940 g of total sulfur as S/m²/yr. The calculated mean annual sulfur flux, weighted by soil order, was 0.03 g S/m²/yr for the study land area, or 110,872 metric tons (mT). The estimated annual average sulfur flux increased from 65 mT per 6400 km² for the land grids in the northernmost east-west grid tier to an average 1800 mT for the land grids in the southern Florida grid tiers.

This systematic sampling of major soils provides a much broader data base for estimating biogenic sulfur flux than previously reported for isolated intertidal sites, and presents the first sulfur flux estimates for inland soils which make up approximately 93% of the land of the eastern United States.     

Poaching Risks in Community‐Based Natural Resource Management

Poaching can disrupt wildlife‐management efforts in community‐based natural resource management systems. Monitoring, estimating, and acquiring data on poaching is difficult. We used local‐stakeholder knowledge and poaching records to rank and map the risk of poaching incidents in 2 areas where natural resources are managed by community members in Caprivi, Namibia. We mapped local stakeholder perceptions of the risk of poaching, risk of wildlife damage to livelihoods, and wildlife distribution and compared these maps with spatially explicit records of poaching events. Recorded poaching events and stakeholder perceptions of where poaching occurred were not spatially correlated. However, the locations of documented poaching events were spatially correlated with areas that stakeholders perceived wildlife as a threat to their livelihoods. This result suggests poaching occurred in response to wildlife damage occurred. Local stakeholders thought that wildlife populations were at high risk of being poached and that poaching occurred where there was abundant wildlife. These findings suggest stakeholders were concerned about wildlife resources in their community and indicate a need for integrated and continued monitoring of poaching activities and further interventions at the wildlife‐agricultural interface. Involving stakeholders in the assessment of poaching risks promotes their participation in local conservation efforts, a central tenet of community‐based management. We considered stakeholders poaching informants, rather than suspects, and our technique was spatially explicit. Different strategies to reduce poaching are likely needed in different areas. For example, interventions that reduce human‐wildlife conflict may be required in residential areas, and increased and targeted patrolling may be required in more remote areas. Stakeholder‐generated maps of human‐wildlife interactions may be a valuable enforcement and intervention support tool. Riesgos de Cacería Furtiva en el Manejo de Recursos Naturales Basado en Comunidades     

Transport of chlorinated dioxins and furans in soil columns: modeling pentachlorophenol pole-treating oil influence

Column experiments were conducted to validate a screening model predicting the influence of pentachlorophenol (PCP) pole-treating oil on the vertical migration of its impurities, chlorinated dioxins and furans (PCDD/Fs). PCP pole-treating oil (15 mL d⁻¹) and water (20 mL d⁻¹) were added daily to the top of sand and organic soil columns during 35 d. Column soil samples were analyzed to determine concentrations of hydrocarbons and PCDD/Fs at several depths in the columns (0-30 cm) and their evolution in time (7, 14, 21 and 35 d).The model predicted a significant vertical migration of PCDD/Fs due to the presence of oil as a free phase and PCDD/Fs were found in the different column layers at concentrations consistent with model predictions (same order of magnitude). Measured PCDD/Fs concentrations are in total disagreement with literature data and with model prediction in the absence of oil free phase, which implies PCDD/F properties alone cannot be used to predict their fate in the current context: the influence of PCP pole-treating oil must be accounted for to properly explain their migration.     

Significance of Regional Source Contributions to Urban PM-10 Concentrations

Based on data collected in St. Louis, Philadelphia and other eastern U.S. cities, we conclude that a significant fraction of the PM-10 concentration is "background." In these urban areas the background fraction ranges from 35 to 80 percent of the daily, monthly or annual concentration. The bulk of the background appears to be of regional origin. The average chemical makeup of eastern U.S. PM-10 is sulfate as SO₄, 21-34 percent; crustal material, 14-39 percent; "unknown" (carbonaceous matter, ammonium, nitrate and water), 36-51 percent, all of which is difficult to apportion to specific sources. Dispersion modeling using a local source inventory can account only for a small portion of the total PM-10 mass. Emission roll-back of local sources may have a limited effect on reducing total concentrations of PM-10.     

Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties

The variation of mechanical properties such as tensile and flexural properties of randomly oriented unsaturated polyester based sisal/carbon fibre reinforced hybrid composites with different fibre weight ratios have been studied. The chemical resistance test of these hybrid composites to various solvents, acids and alkalies were studied. The effect of NaOH treatment of sisal fibres on the tensile, flexural and chemical resistance properties of these sisal/carbon hybrid composites has also been studied. The hybrid composites showed an increase in tensile and flexural properties with increase in the carbon fibre loading. The tensile properties and flexural properties of these hybrid composites have been found to be higher than that of the matrix. Significant improvement in tensile properties and flexural properties of the sisal/carbon hybrid composites has been observed by alkali treatment. The chemical resistance test results showed that these untreated and alkali treated hybrid composites are résistance to all chemicals except carbon tetra chloride. Hand lay-up technique was used for making the composites and tests are carried out by using ASTM methods.     

Chemical fluxes in time through forest ecosystems in the UK - Soil response to pollution recovery

Long term trend analysis of bulk precipitation, throughfall and soil solution elemental fluxes from 12 years monitoring at 10 ICP Level II forest sites in the UK reveal coherent national chemical trends indicating recovery from sulphur deposition and acidification. Soil solution pH increased and sulphate and aluminium decreased at most sites. Trends in nitrogen were variable and dependant on its form. Dissolved organic nitrogen increased in bulk precipitation, throughfall and soil solution at most sites. Nitrate in soil solution declined at sites receiving high nitrogen deposition. Increase in soil dissolved organic carbon was detected - a response to pollution recovery, changes in soil temperature and/or increased microbial activity. An increase of sodium and chloride was evident - a possible result of more frequent storm events at exposed sites. The intensive and integrated nature of monitoring enables the relationships between climate/pollutant exposure and chemical/biological response in forestry to be explored.     

Assessment of dietary exposure to PCDD/F and dioxin-like PCB in infant formulae available on the EU market

In infant period, human milk and infant formulae are the major sources of exposure to dioxins (polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (PCB). Since in many parts of Europe the mothers are increasingly reluctant to breastfeed their babies, the main objective of the present study is to assess the level of exposure of non-breast-fed infants during their early development. Consequently, the concentration levels of PCDD/F and dioxin-like PCB were determined in industrial infant formulae including "starting" (aged 0-4months) and "follow-on" (after 4months) products of milk formula, soy formula and hypoallergenic infant formula, available on the EU market. Furthermore, dietary exposure to dioxin of exclusively formula-fed infants was assessed at each month from 0 to 9months. The results suggest that dietary exposure to dioxins via formulae is higher when consuming "starting" than "follow-on" infant formulae on a body-weight basis. Estimated dietary exposure after 4months of age was always below the lowest range of the Tolerable Daily Intake (TDI) of 1pg WHO-TEQkg(-1)bwd(-1) and Provisional Tolerable Monthly Intake (PTMI) of 70pg WHO-TEQkg(-1)bwmonth(-1). The highest estimated cumulative dietary exposure to PCDD/F and dioxin-like PCB was obtained considering infants of 0-1months fed with the "starting" hypoallergenic infant formula (2.8pg WHO-TEQkg(-1)bwd(-1) and 84pg WHO-TQkg(-1)bwmonth(-1)). However, these elevated levels are much lower than those observed in some studies in breast-fed infants. The study can be used for further risk assessments in regard to infant exposure.