Mean annual (222)Rn concentration in homes located in different geological regions of Poland: first approach to whole country area

The paper presents the results of year-long measurements of radon (²²²Rn) concentration inside 129 buildings in Poland in relation to the geological conditions of their foundation. The authors took into account the division of the country into tectonic units, as well as the lithology of the rocks forming the bedrock of these buildings. As expected, the highest value of mean annual ²²²Rn concentration (845 Bq/m³) was recorded in a building situated in the area of the Sudetes, while the highest geometric mean (characteristic of the expected log-normal data distribution) was calculated based on measurements from buildings located within the East-European craton, in the area of Mazury-Podlasie monocline, where it reached 231 Bq/m³. Such results reflect geological conditions - the occurrence of crystalline rocks (especially U- and Ra-enriched granites and orthogneisses) on the surface in the Sudetes, and of young post-glacial sediments containing fragments of Scandinavian crystalline rocks, also enriched with U and Ra, in the area of Mazury-Podlasie monocline. However, the least expected result of the investigations was finding out that, contrary to the hitherto widespread belief, none of the major tectonic units of Poland can be excluded from the list of those containing buildings with mean annual ²²²Rn concentration exceeding 200 Bq/m³. The mean annual concentration of radon for all the buildings were much higher than the mean concentration value (49.1 Bq/m³) of indoor radon in Poland quoted so far. These results cast a completely new light on the necessity to perform measurements of radon concentration in residential buildings in Poland, no more with reference to small areas with outcrops of crystalline rocks (especially the Sudetes, being the Polish fragment of the European Variscan belt), but for all the major tectonic units within Poland.     

Design for occupational safety and health of workers in construction in developing countries: a study of architects in Nigeria

Purpose. Design for safety (DfS) of workers is amongst the prominent ways of tackling poor occupational safety and health performance in construction. However, in developing countries there is extremely limited research on DfS. This study thus makes an important contribution to the subject of DfS in developing countries by specifically examining the awareness and practice of DfS amongst architects within the construction sector of Nigeria. Materials and methods. A survey of architects, yielding 161 valid responses, was conducted. Results. While there is high awareness of the concept of DfS, the actual practice is low. Additionally, although there is high interest in DfS training, the engagement in DfS training is low. Significantly, awareness of DfS, training and education related to DfS, and membership of a design professional body have very limited bearing on the practice of DfS by architects. Conclusions. The findings are thus symptomatic of the prevalence of influential DfS implementation barriers within the construction sector. Industry stakeholders should seek to raise the profile of DfS practice within the sector. Furthermore, similar empirical studies in the construction sector of other developing countries would be useful in shedding light on the status of DfS in these countries.     

Concentration,sources and risk assessment of PAHs in bottom sediments

Environmental Science and Pollution Research - The aims of the study were to investigate the concentration, sources and ecological risk of PAHs (polycyclic aromatic hydrocarbons) in bottom...     

Identification of volatiles from Pinus silvestris attractive for Monochamus galloprovincialis using a SPME-GC/MS platform

Introduction

A myriad of volatile organic compounds (VOCs) released by terrestrial vegetation plays an important role in environmental sciences. A thorough chemical identification of these species at the molecular level is essential in various fields, ranging from atmospheric chemistry to ecology of forest ecosystems. In particular, the recognition of VOCs profiles in a context of plant?Cinsect communication is a key issue for the development of forest protection tools.

Purpose

This work was aimed at the development of a simple, robust and reliable method for the identification of volatiles emitted from plant materials, which can attract or deter pest insects. Specifically, volatiles emitted from the bark of Pinus sylvestris were studied, which might attract the black pine sawyer beetle Monochamus galloprovincialis??a serious pest of the tree and a vector of a parasitic nematode Bursaphelenchus xylophius.

Method

The volatiles from bark samples were collected using a solid-phase micro-extraction technique, and subsequently analysed by gas-chromatography/mass-spectrometry (GC/MS). The characterisation of the volatile fraction was based on the comparison with data in mass spectral libraries, and in most cases, with the available authentic standards. The identified compounds were screened against the available entomological data to select insect attractors.

Results

The identified components included terpenes (??-pinene, ?-3-carene, and para-cymenene), oxygenated terpenes (??-terpineol and verbenone), sesquiterpenes (??-longipinene, longifolene, E-??-farnesene, ??-cadinene and pentadecane), and diterpenes (manoyl oxide and (+)-pimaral). Of these, longifolene and (+)-pimaral are of particular interest as plausible attractors for the M. galloprovincialis beetle that might find application in the construction of insect bait traps.     

Conference report: 18th World Hydrogen Energy Conference 2010

Report is given on the 18th Word Hydrogen Energy Conference held on 16--20 May 2010 in Essen, Germany. Basic facts about conference organization, and its goal, scientific programme and conclusions are reviewed.     

Metal concentrations in deciduous tree leaves from urban areas in Poland

Accumulation of metals in deciduous tree foliage fromurban areas in western-south Poland was monitored duringthe vegetation season of 2000 year. Concentrations of Al,Ba, Ca, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr, Ti and Znwere measured in birch, willow, linden and maple leavesusing the ICP-AES method. Seasonal variations of metalconcentrations and their relations with sampling sitewere investigated. The most dynamic accumulation of Al,Cd, Cr, Ni and Pb was observed for examined species. Thehighest differences in element concentrations forinvestigated sites were found for Ba, Cd, Mn and Ni.Interelement correlations were investigated. In allfoliar samples synergistic relationships between Al–Crand Ca-Sr were found. Statistically significant negativecorrelations were observed only for Cd and Ti in birch leaves.     

Occupational risk from static magnetic fields of MRI scanners

The health care staff operating magnetic resonance imaging (MRI) scanners are exposed to static magnetic field of significant spatial heterogenity and high level of flux density—usually existing permanently during the shift. The personnel can also be exposed to pulses of magnetic field of high rate of rise/fall, so-called gradient fields, which exist only during examination of patients. The level of workers’ exposure depends both on the type of the magnet and on the ergonomical characteristic of design of the particular MRI scanner. This paper presents the current state of the art on occupational exposure to static magnetic field health effects, gaps in scientific data, MRI workers’ exposure characteristics, research needs, and suggestions for the exposure assessment protocol for future investigations.     

Practical aspects of occupational EMF exposure assessment

Electromagnetic fields exposure assessment methodology is briefly presented. The basic problems defined for the practical use of electromagnetic fields measurements and numerical calculations carried out for workers exposure assessment in real occupational situations are discussed. The examples of data from real workplace are presented, focusing: spatial distribution of electromagnetic fields affecting worker’s body, complex characteristics of the frequency content, workers activities/moving in the workplace, field impedance, etc. The situation when the use of calculations is required is discussed. The basic requirements for workers exposure assessment protocols are presented. The possible range of the use of internal and external measures of exposure level is also discussed.     

Mercury in wild mushrooms and underlying soil substrate from Koszalin, North-central Poland

Concentrations of total mercury were determined by cold-vapour atomic absorption spectroscopy (CV-AAS) in 221 caps and 221 stalks of 15 species of wild growing higher fungi/mushrooms and 221 samples of corresponding soil substrate collected in 1997-98 in Manowo County, near the city of Koszalin in North-central Poland. Mean mercury concentrations in caps and stalks of the mushroom species examined and soils varied between 30+/-31 and 920+/-280, 17+/-11 and 560+/-220, and 10+/-9 and 170+/-110 ng/g dry matter, respectively. Cap to stalk mercury concentration quotients were from 1.0+/-0.4 in poison pax (Paxillus involutus) to 2.8+/-0.7 in slippery jack (Suillus luteus). Brown cort (Cortinarius malicorius), fly agaric (Amanita muscaria), orange-brown ringless amanita (A. fulva), red-aspen bolete (Leccinum rufum) and mutagen milk cap (Lactarius necator) contained the highest concentrations of mercury both in caps and stalks, and mean concentrations varied between 600+/-750 and 920+/-280 and 370+/-470 and 560+/-220 ng/g dry matter, respectively. An estimate of daily intake of mercury from mushroom consumption indicated that the flesh of edible species of mushrooms may not pose hazards to human health even at a maximum consumption rate of 28 g/day. However, it should be noted that mercury intake from other foods will augment the daily intake rates. Species such as the sickener (Russula emetica), Geranium-scented russula (R. fellea) and poison pax (P. involutus) did not concentrate mercury as evidenced from the bioconcentration factors (BCFs: concentrations in mushroom/concentration in soil substrate), which were less than 1. Similarly, red-hot milk cap (L. rufus), rickstone funnel cap (Clitocybe geotropa) and European cow bolete (S. bovinus) were observed to be weak accumulators of mercury. Fly agaric (A. muscaria) accumulated great concentrations of mercury with BCFs reaching 73+/-42 and 38+/-22 in caps and stalks, respectively. Mercury BCFs of between 4.0+/-2.3 and 23+/-25 (caps) and 2.6+/-1.9 and 14+/-12 (stalks) were noted for the other mushroom species. Relatively great concentrations of mercury in fly agaric (A. muscaria) were due to preferential uptake of this element by this species.     

Accumulation of metallic elements by Amanita muscaria from rural lowland and industrial upland regions

ABSTRACT

This study was carried out on the accumulation and occurrence of Ag, Al, Ba, Ca, Cd, Co, Cu, Fe, Hg, K, Mg, Mn, Na, Rb, Sr and Zn in the mushroom Amanita muscaria and forest topsoil from two lowland sites in the Tuchola Pinewoods in the north-central region and an upland site in the ?wietokrzyskie Mountains in the south-central region of Poland. Topsoil from the upland location showed Ag, Al, Ba, Ca, Cd, Co, Cu, Fe, Hg, Na and Zn at significantly higher concentration levels (pseudo-total fraction and often also the labile or extractable fraction) than at both lowland locations, where topsoil was richer in Mg, and similar in Rb. Amanita muscaria from the upland region differed from individuals collected in the lowland sites by higher concentration levels of Cd, Cu, Hg and Mn in caps. This could be related to higher concentration levels of the metallic elements in topsoil in the upland region. On other side, A. muscaria from the upland site was poorer in Co and Fe in caps, and in Ca, Co, Fe and Sr in stipes. In spite of the differences in content of the geogenic metallic elements in topsoil between the lowland and upland locations, A. muscaria from both regions was able to regulate uptake and accumulation of Ag, Al, Ba, Ca, K, Mg, Na, Rb and Zn, which were at similar concentration levels in caps but not necessarily in stipes.