Horticultural oils: possible alternatives to chemical pesticides and insecticides

Environmental Science and Pollution Research - The farmers and agrochemical industries lack science-based knowledge about sustainable utilization of pesticides and insecticides. The investigation...     

Degradation of ammonium dinitramide (ADN) in digested sewage sludge under strict anaerobic conditions

The biodegradation of one popular nitramine energetics, ammonium dinitramide (ADN) by mixture of denitrifying bacterial species was investigated. ADN was observed to be effectively mineralized in the anaerobic mixed culture. The initial ADN concentration of 250 mg/L was reduced to non‐detectable levels (> 99% removal efficiency) in 5 days of incubation under anaerobic conditions. Final products generated from anaerobic degradation of nitramine energetics by anaerobic metabolism were NH₄ ⁺, CH₄, and CO₂ that were released to the environment with the denitrifiers’ growth. In addition, it was found that the activity of denitrifiers was inhibited by high concentration of ammonia generated through the degradation reactions of energetic nitrites.     

The use of ion exchange membranes for isotope analyses on soil water sulfate: laboratory experiments

To investigate the potential use of anion exchange membranes (plant root simulator [PRS] probes) for isotope investigations of the soil sulfur cycle, laboratory experiments were performed to examine the sulfate exchange characteristics and to determine the extent of sulfur and oxygen isotope fractionation during sulfate sorption and desorption on the probes in aqueous solutions and simulated soil solutions. The sulfate-exchange tests in aqueous solutions under varying experimental conditions indicated that the amount of sulfate exchanged onto PRS probes increased with increasing reaction time, initial sulfate concentration, and the number of probes used (= surface area), whereas the percentage of removal of available sulfate was constant irrespective of the initial sulfate concentration. The competition of nitrate and chloride in the solution lowered the amount of exchanged sulfate. The exchange experiments in a simulated soil under water-saturated and water-unsaturated conditions showed that a considerable proportion of the soil sulfate was exchanged by the PRS probes after about 10 d. There was no evidence for significant sulfur and oxygen isotope fractionation between soil sulfate and sulfate recovered from the PRS probes. Therefore, we recommend the use of PRS probes as an efficient and easy way to collect soil water sulfate for determination of its isotope composition.     

Nonparametric Monte Carlo Simulation for Flood Frequency Curve Derivation: An Application to a Korean Watershed1

Abstract: A mix of causative mechanisms may be responsible for flood at a site. Floods may be caused because of extreme rainfall or rain on other rainfall events. The statistical attributes of these events differ according to the watershed characteristics and the causes. Traditional methods of flood frequency analysis are only adequate for specific situations. Also, to address the uncertainty of flood frequency estimates for hydraulic structures, a series of probabilistic analyses of rainfall‐runoff and flow routing models, and their associated inputs, are used. This is a complex problem in that the probability distributions of multiple independent and derived random variables need to be estimated to evaluate the probability of floods. Therefore, the objectives of this study were to develop a flood frequency curve derivation method driven by multiple random variables and to develop a tool that can consider the uncertainties of design floods. This study focuses on developing a flood frequency curve based on nonparametric statistical methods for the estimation of probabilities of rare floods that are more appropriate in Korea. To derive the frequency curve, rainfall generation using the nonparametric kernel density estimation approach is proposed. Many flood events are simulated by nonparametric Monte Carlo simulations coupled with the center Latin hypercube sampling method to estimate the associated uncertainty. This study applies the methods described to a Korean watershed. The results provide higher physical appropriateness and reasonable estimates of design flood.     

Perspirable skin: Thermal buckling achieved by complex functionally graded materials

A perspirable skin is a new design concept of thermal protection system that will autonomously reduce the surface temperature in many applications such as reentry and hypersonic vehicles. A unique design features an assembly of tiles, which buckles upon heating. Potentially, a large gap can be generated through this buckling action. These tiles will be assembled and shrink-fitted within an opening on the existing skin. To induce the buckling action, each tile needs to have a unique CTE variation, which causes thermal expansion radially and thermal shrinkage tangentially. This paper concentrates on the fabrication of these tiles made of complex functionally graded materials (FGMs), and presents our effort to design and fabricate these tiles.     

Molecular approaches for the detection and monitoring of microbial communities in bioaerosols: A review

Bioaerosols significantly affect atmospheric processes while they undergo long-range vertical and horizontal transport and influence atmospheric chemistry and physics and climate change. Accumulating evidence suggests that exposure to bioaerosols may cause adverse health effects, including severe disease. Studies of bioaerosols have primarily focused on their chemical composition and largely neglected their biological composition and the negative effects of biological composition on ecosystems and human health. Here, current molecular methods for the identification, quantification, and distribution of bioaerosol agents are reviewed. Modern developments in environmental microbiology technology would be favorable in elucidation of microbial temporal and spatial distribution in the atmosphere at high resolution. In addition, these provide additional supports for growing evidence that microbial diversity or composition in the bioaerosol is an indispensable environmental aspect linking with public health.     

Characterization of particulate matter from diesel passenger cars tested on chassis dynamometers

Emission characterization of particle number as well as particle mass from three diesel passenger cars equipped with diesel particulate filter(DPF), diesel oxidation catalyst(DOC)and exhaust gas recirculation(EGR) under the vehicle driving cycles and regulatory cycle.Total particle number emissions(PNEs) decreased gradually during speed-up of vehicle from 17.3 to 97.3 km/hr. As the average vehicle speed increases, the size-segregated peak of particle number concentration shifts to smaller size ranges of particles. The correlation analysis with various particulate components such as particle number concentration(PNC),ultrafine particle number concentration(UFPNC) and particulate matter(PM) mass was conducted to compare gaseous compounds(CO, CO_2, HC and NOx). The UFPNC and PM were not only emitted highly in Seoul during severe traffic jam conditions, but also have good correlation with hydrocarbons and NOxinfluencing high potential on secondary aerosol generation. The effect of the dilution temperature on total PNC under the New European Driving Cycle(NEDC), was slightly higher than the dilution ratio. In addition, the nuclei mode(DP: ≤ 13 nm) was confirmed to be more sensitive to the dilution temperature rather than other particle size ranges. Comparison with particle composition between vehicle speed cycles and regulatory cycle showed that sulfate was slightly increased at regulatory cycle, while other components were relatively similar. During cold start test, semivolatile nucleation particles were increased due to effect of cold environment. Research on particle formation dependent on dilution conditions of diesel passenger cars under the NEDC is important to verify impact on vehicular traffic and secondary aerosol formation in Seoul.     

Pilot-scale tests to optimize the treatment of net-alkaline mine drainage

A pilot-scale plant consisting of an oxidation basin (OB), a neutralization basin (NB), a reaction basin (RB), and a settling basin (SB) was designed and built to conduct pilot-scale experiments. With this system, the effects of aeration and pH on ferrous oxidation and on precipitation of the oxidized products were studied systemically. The results of pilot-scale tests showed that aeration at 300 L/min was optimum for oxidation of Fe(II) in the OB, and the efficiency of oxidation of Fe(II) increased linearly with increasing retention time. However, Fe(II) was still present in the subsequent basins-NB, RB, and SB. Results from pilot-scale tests in which neutralization was excluded were used to obtain rate constants for heterogeneous and homogeneous oxidation. Oxidation of Fe(II) reached almost 100% when the pH of the mine drainage was increased to more than 7.5, and there was a linear relationship between total rate constant, log (K(total)), and pH. Absorbance changes for samples from the NB under different pH conditions were measured to determine the precipitation properties of suspended solids in the SB. Because ferrous remained in the inflow to the SB, oxidation of Fe(II) was dominant initially, resulting in increased absorbance, and the rate of precipitation was slow. However, the absorbance of the suspension in the SB rapidly dropped when pH was higher than 7.5.