Terbuthylazine Contamination of the Aquifer North of Vicenza (North-East Italy) (5 pp)

- DOI: http://dx.doi/10.1065/espr2006.01.016 Background and Goal Agricultural practices can affect the quality of aquifers given that they are often located in cropped areas, so significant amounts of pesticides can be found in the water. In particular, triazine herbicides are always carefully checked by the official monitoring systems. The goal of this study was to find the mean concentration of terbuthylazine in an Italian aquifer and to set up a mass balance of this compound. Methods Terbuthylazine concentrations in the aquifer were measured in various check-wells during 1998–2004, and the value of censored data were estimated using a Gompertz inverse in order to evaluate the overall mean concentration. The total terbuthylazine load in the recharge area was calculated on the basis of surveys of cropped land and the main weed control techniques applied in the area. Data on aquifer water balance were obtained from previous studies. Results and Discussion The herbicide terbuthylazine applied in the recharge zone can be transported by surface water and enter the aquifer. Detected concentrations were always well below the EU drinking water limit and the fraction that can reach the groundwater under normal cropping practices is small, very likely less than 0.2%. Recommendations and Outlook The use and application rates of pesticides should be strictly regulated in recharge areas. Vegetated buffer strips can mitigate the impact of herbicides on surface water through reducing drift and early-spring runoff. Attention should also be paid to the fate of the main metabolites from soil biochemical processes.     

Nitrate,sulphate and chloride contents in public drinking water supplies in Sicily,Italy

Water samples collected from public drinking water supplies in Sicily were analysed for electric conductivity and for their chloride, sulphate and nitrate contents. The samples were collected as uniformly as possible from throughout the Sicilian territory, with an average sampling density of about one sample for every 7,600 inhabitants. Chloride contents that ranged from 5.53 to 1,302 mg/l were correlated strongly with electric conductivity, a parameter used as a proxy for water salinity. The highest values are attributable to seawater contamination along the coasts of the island. High chloride and sulphate values attributable to evaporitic rock dissolution were found in the central part of Sicily. The nitrate concentrations ranged from 0.05 to 296 mg/l, with 31 samples (4.7% of the total) exceeding the maximum admissible concentration of 50 mg/l. Anomalous samples always came from areas of intensive agricultural usage, indicating a clear anthropogenic origin. The same parameters were also measured in bottled water sold in Sicily, and they all were within the ranges for public drinking water supplies. The calculated mean nitrate intake from consuming public water supplies (16.1 mg/l) did not differ significantly from that of bottled water (15.2 mg/l). Although the quality of public water supplies needs to be improved by eliminating those that do not comply with the current drinking water limits, at present it does not justify the high consumption of bottled water (at least for nitrate contents).     

Effects of selected metal oxide nanoparticles on Artemia salina larvae: evaluation of mortality and behavioural and biochemical responses

The aim was to investigate the toxicity of selected metal oxide nanoparticles (MO-NPs) on the brine shrimp Artemia salina, by evaluating mortality and behavioural and biochemical responses. Larvae were exposed to tin(IV) oxide (stannic oxide (SnO₂)), cerium(IV) oxide (CeO₂) and iron(II, III) oxide (Fe₃O₄) NPs for 48 h in seawater, with MO-NP suspensions from 0.01 to 1.0 mg/mL. Mortality and behavioural responses (swimming speed alteration) and enzymatic activities of cholinesterase, glutathione-S-transferase and catalase were evaluated. Although the MO-NPs did not induce any mortality of the larvae, they caused changes in behavioural and biochemical responses. Swimming speed significantly decreased in larvae exposed to CeO₂ NPs. Cholinesterase and glutathione-S-transferase activities were significantly inhibited in larvae exposed to SnO₂ NPs, whereas cholinesterase activity significantly increased after CeO₂ NP and Fe₃O₄ NP exposure. Catalase activity significantly increased in larvae exposed to Fe₃O₄ NPs. In conclusion, swimming alteration and cholinesterase activity represent valid endpoints for MO-NP exposure, while glutathione-S-transferase and catalase activities appear to be NP-specific.     

Sequential determination and chemical speciation analysis of inorganic As and Sb in airborne particulate matter collected in outdoor and indoor environments using slurry sampling and detection by HG AAS

Environmental Science and Pollution Research - In this work, fast sequential determination and chemical speciation analysis of inorganic arsenic and antimony in airborne particulate matter...     

Application of environmental DNA analysis to inform invasive fish eradication operations

Environmental DNA (eDNA) detection of non-native species has considerable potential to inform management decisions, including identifying the need for population control and/or eradication. An invasive species of European concern is the Asian cyprinid fish, topmouth gudgeon (Pseudorasbora parva). Here, eDNA analyses were applied at a commercial angling venue in southern England to inform operations aiming to eradicate P. parva, which had only ever been observed in one of the venue’s seven unconnected angling ponds. Eradication of P. parva was initially attempted by repeated depletion of the population using fish traps (crayfish traps fitted with 5 mm mesh netting) and the introduction of native predators over a 4-year period. The very low number of P. parva captured following these eradication efforts suggested a possible population crash. Conventional PCR analysis of water samples using species-specific primers was applied to all seven ponds to confirm that P. parva was present in only one pond, that the eradication attempt had indeed failed and that the species’ distribution in the pond appeared to be restricted to three bankside locations. The continued presence of P. parva at these locations was confirmed by subsequent trapping. Water samples from an adjacent, unconnected stream were also analysed using the eDNA methodology, but no DNA of P. parva was detected. The results suggest that further management action to eradicate P. parva be focused on the pond shown to contain the isolated P. parva population and thereby eliminate the risk of further dispersal. This study is the first to apply eDNA analysis to assess the efficacy of an eradication attempt and to provide evidence that the species was unlikely to be present in the other ponds, thus reducing the resources needed to control the species.     

Robotic testing of radio frequency devices designed for industrial safety

An experimental setup is proposed to test the performance of safety devices based on radio frequency technology. The setup specifically tests devices designed for improving safety in dangerous areas of small size, such as those surrounding power press brakes. Tested here is a radio frequency identification (RFID) prototype, whose main objective is to prevent accidents by sending a stop signal to a machine when a worker’s wrist, bearing an RFID tag, gets too close to the dangerous area. An ABB IRB 2400L robot is used as a reference system; this system is capable of providing millimeter accuracy. A plastic hand and a wristband with at least one passive RFID tag are attached to the end of the robot arm, which emulates the behavior of a human arm. With this robotic approach, it is possible to test trajectories with different velocities and orientations and to simulate several risky situations associated with machine use. Several experiments are presented that were conducted with the RFID prototype, and statistics are reported on the distance detection capability of this safety system with respect to the plane that defines the dangerous area. A matrix approach is proposed for analyzing the robustness of safety devices that are designed to automatically prevent a worker entering in dangerous areas. The results show the benefits that development of a radio frequency device of this class could confer towards increasing worker safety.     

Separation of plastic waste via the hydraulic separator Multidune under different geometric configurations

The recovery of high-quality plastic materials is becoming an increasingly challenging issue for the recycling sector. Technologies for plastic recycling have to guarantee high-quality secondary raw material, complying with specific standards, for use in industrial applications. The variability in waste plastics does not always correspond to evident differences in physical characteristics, making traditional methodologies ineffective for plastic separation. The Multidune separator is a hydraulic channel allowing the sorting of solid particles on the basis of differential transport mechanisms by generating particular fluid dynamic conditions due to its geometric configuration and operational settings. In this paper, the fluid dynamic conditions were investigated by an image analysis technique, allowing the reconstruction of velocity fields generated inside the Multidune, considering two different geometric configurations of the device, Configuration A and Configuration B. Furthermore, tests on mono- and bi-material samples were completed with varying operational conditions under both configurations. In both series of experiments, the bi-material samples were composed of differing proportions (85% vs. 15%) to simulate real conditions in an industrial plant for the purifying of a useful fraction from a contaminating fraction. The separation results were evaluated in terms of grade and recovery of the useful fraction.     

Density dependence and density independence during the early life stages of four marine fish stocks

Recruitment variability caused by density-dependent and density-independent processes is an important area within the study of fish dynamics. These processes can exhibit nonlinearities and nonadditive properties that may have profound dynamic effects. We investigate the importance of population density (i.e., density dependence) and environmental forcing (i.e., density independence) on the age-0 and age-1 abundance of capelin (Mallotus villosus), northeast Arctic cod (Gadus morhua), northeast Arctic haddock (Melanogrammus aeglefinus), and Norwegian spring spawning herring (Clupea harengus) in the Barents Sea. We use statistical methods that explicitly account for nonlinearities and nonadditive interactions between internal and external variables in the abundance of these two pre-recruitment stages. Our results indicate that, during their first five months of life, cod, haddock, and herring experience higher density-dependent survival than capelin. The abundance of age-0 cod depends on the mean age and biomass of the spawning stock, a result which has implications for the management of the entire cod stock. Temperature is another important factor influencing the abundance at age-0 and age-1 of all four species, except herring at age-1. Between age-0 and age-1, there is an attenuation of density-dependent survival for cod and herring, while haddock and capelin experience density dependence at high and low temperatures, respectively. Predation by subadult cod is important for both capelin and cod at age-1. We found strong indications for interactions among the studied species, pointing to the importance of viewing the problem of species recruitment variability as a community, rather than as a population phenomenon.