BASE FLOW RECESSION RATES,LOW FLOWS,AND HYDROLOGIC FEATURES OF SMALL WATERSHEDS IN PENNSYLVANIA,USA1

This paper examines the relationships between measurable watershed hydrologic features, base flow recession rates, and the Q_7,10 low flow statistic (the annual minimum seven‐day average streamflow occurring once every 10 years on average). Base flow recession constants were determined by analyzing hydrograph recession data from 24 small (>130 km²), unregulated watersheds across five major physiographic provinces of Pennsylvania, providing a highly variable dataset. Geomorphic, hydrogeologic, and land use parameters were determined for each watershed. The base flow recession constant was found to be most strongly correlated to drainage density, geologic index, and ruggedness number (watershed slope); however, these three parameters are intercorrelated. Multiple regression models were developed for predicting the recession rate, and it was found that only two parameters, drainage density and hydrologic soil group, were required to obtain good estimates of the recession constant. Equations were also developed to relate the recession rates to Q_7,10 per unit area, and to the Q_7,10/Q₅₀ ratio. Using these equations, estimates of base flow recession rates, Q_7,10, and streamflow reduction under drought conditions can be made for small, ungaged basins across a wide range of physiography.     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.     

MULTICRITERION ANALYSIS OF FOREST WATERSHED MANAGEMENT ALTERNATIVES1

ABSTRACT: The impacts of alternative forest watershed management practices are examined from a multicriterion viewpoint in order to select the most satisfactory management scheme. The selection process is carried out using two types of multicriterion decision making techniques: the outranking types of ELECTRE I and II, and the distance-based type of compromise programming (CP). The process is illustrated using the U.S. Forest Service Beaver Creek Experimental Watershed in the Salt-Verde River Basin of Arizona as an example. The desired objectives of the experimental study and the alternative forest watershed resources management schemes are transformed into an evaluation matrix of alternatives versus criteria array. Analyses of the matrix using the aforementioned techniques result in a complete preference ordering of the feasible alternatives in the cases of ELECTRE LI and CP and a partial ordering when ELECTRE I is used. In addition, some sensitivity analyses have been performed and showed ELECTRE II and CP to be fairly robust with respect to parameter changes, while ELECTRE I being highly sensitive to changes in threshold levels. Overall the three techniques pointed out that 65 percent vegetation cut is the best management scheme, while the next best is shown to be 50 percent vegetation cut.     

The influence of landmarks on the systematic search behaviour of the desert isopod Hemilepistus reaumuri

Summary The desert isopod Hemilepistus reaumuri uses embankments of faeces, which each family builds around the entrance of its burrow, as an aid to homing after a foraging excursion. Though an isopod must touch its family's embankment (outer radius 8–15 cm) with its antennae before it can detect it, this landmark eases the return to the burrow appreciably. However, this advantage is imperiled by problems with similar landmarks. If during foraging the isopod goes astray and has to search for its landmark it also explores most of the alien families' embankments it detects, at least until it has located the burrow entrance within it. But it is not trapped by such similar landmarks. Whereas an isopod explores its own embankment until it comes to its burrow, digging for hours if the burrow entrance happens to be covered by sand, it leaves an alien embankment after most a few minutes and resumes its search. This shows that the isopod is able to distinguish this landmark from its own, probably by the same chemical badge it uses for the identification of family members. A desert isopod must explore alien embankments predominantly because it is not able to distinguish an alien embankment which is near its own burrow and may intersect its own embankment from others. Even when the animal explores and embankment in vain for a long time it could simply have overlooked its own burrow's entrance. In addition the isopod does not recognize an alien embankment which it has already explored. Therefore during a longer search, it has to explore an alien embankment again and again. H. reaumuri solves these identification problems, which correspond to the problems of other arthropods using landmarks for orientation, in a very successful manner. By repeatedly returning to a particular area it searches there more intensively, the greater the probability that its burrow is in this area according to the information, independent of landmarks, available to the animal. In most cases when it detects a particular alien embankment it explores it for a constant short time (on average 20.4 s). It follows that the isopod explores an alien embankment more intensively, the greater the probability that its burrow is within it. In this simple manner it approximately fulfills the rules of the best mathematical procedures that have recently been developed for solving search problems in which an object detected must be explored for some time before it can be distinguished from the real target. Theoretically these procedures are more successful than the search behaviour of H. reaumuri, but they require that either a particular landmark can be identified with certainty by exploration or that at least it can be recognized on a later contact. Although H. reaumuri does not meet these requirements, the success of its search behaviour is almost identical to that of the mathematical procedures.     

Crushed concrete as a phosphate binding material: a potential new management tool

To avoid eutrophication of receiving waters, effective methods to remove P in urban and agricultural runoff are needed. Crushed concrete may be an effective filter material to remove dissolved and particulate P. Five types of crushed concrete were tested in the laboratory to evaluate the retention capacity of dissolved P. All types removed P very effectively (5.1-19.6 g P kg(-1) concrete), while the possible release of bound P varied between 0.4 and 4.6%. The retention rate was positively related to a decreasing concrete grain size due to an increasing surface area for binding. The P retention was also related to a marked increase in pH (up to pH 12), and the highest retention was observed when pH was high. Under these circumstances, column experiments showed outlet P concentrations <0.0075 mg P L(-1). Furthermore, experiments revealed that release of heavy metals is of no importance for the treated water. We demonstrate that crushed concrete can be an effective tool to remove P in urban and agricultural runoff as filter material in sedimentation/infiltration ponds provided that pH in the treated water is neutralized or the water is diluted before outlet to avoid undesired effects caused by the high pH.     

Electrostatic separators of particles: Application to plastic/metal, metal/metal and plastic/plastic mixtures

Electrostatic separation is a generic term given to a significant class of technologies of industrial waste processing, widely used for the sorting of granular mixtures due to electric forces acting on particles whose average size is approximately 5mm. The focus of this paper is on three electrostatic processes of separation used for processing of different types of mixtures: (i) role-type electrostatic separator, used to sort mixtures containing metal/plastic particles (copper/PVC for example); (ii) plate-type electrostatic separator, used to sort mixtures containing metal/metal particles (copper/lead for example) and (iii) free-fall electrostatic separator, used to sort mixtures of plastic/plastic particles (PVC/PE for example). Experiments carried out on industrial samples using laboratory electrostatic separators confirm the efficiency of these processes and show that the processes can improve the recovery and purity of products resulting from industrial wastes.