Soil fertility dynamics in runoff-capture agriculture, Canary Islands, Spain

In the extremely arid (∼150 mm yr⁻¹) eastern Canary Islands of Lanzarote, Fuerteventura and La Graciosa, agriculture has been sustained for decades by a traditional runoff-capture (RC) farming system known as “gavias”. Although the main goal of these systems is to increase water supply for crops, making unnecessary conventional irrigation, a secondary and equally important factor is that this system allows for sustainable agricultural production without addition of chemical or organic fertilizers. A field study was conducted to assess the impact of long-term agriculture (>50 yr) on soil fertility and to evaluate key factors affecting the nutrient sustainability of RC agricultural production. Soil fertility and nutrient dynamics were studied through chemical characterization of the arable layer (0-25 cm) of RC agricultural plots, adjacent natural soils (control) not affected by runoff and cultivation, and sediments contributed by a series of RC events. Results showed that RC soils have enhanced fertility status, particularly because they are less affected by salinity and sodicity (mean electrical conductivity = 1.8 dS m⁻¹ vs. 51.0 dS m⁻¹ in control soils; mean exchangeable sodium percentage = 11.1% vs. 30.6% in control soils), and have higher water and nutrient holding capacities (mean clay plus silt contents ≈87% vs. 69% in control soils). In general, sediments transported with the runoff and deposited in RC plots (average sediment yield ≈ 46 ton ha⁻¹ yr⁻¹), contain sufficient nutrients to prevent a progressive reduction of essential plant nutrients below natural levels in spite of nutrient uptake and removal by the harvested crop. Average additions of nitrogen, phosphorus and potassium with the runoff sediments were 33.6, 35.3 and 48.8 kg ha⁻¹ yr⁻¹, respectively. Results of this study show how a crop production system can be sustained in the long term by natural hydrological and biogeochemical catchment processes. This system maintains a nutrient balance that is not based on energy-intensive inputs of fertilizers, but is integrated in natural nutrient cycling processes, unlike other tropical farming agroecosystems.     

A new captorhinid reptile, Gansurhinus qingtoushanensis, gen. et sp. nov., from the Permian of China

Captorhinids, a clade of Paleozoic reptiles, are represented by a rich fossil record that extends from the Late Carboniferous into the Late Permian. Representatives of this clade dispersed from the equatorial regions of Laurasia into the temperate regions of Pangea during the Middle and Late Permian. This rich fossil record shows that there was an evolutionary trend from faunivorous to omnivorous and herbivorous feeding habits within this clade. The discovery of well-preserved captorhinid materials in the Middle Permian of China allows us to determine that the new taxon, Gansurhinus qingtoushanensis, gen. et sp. nov, is a member of Moradisaurinae, a clade of captorhinids with multiple tooth rows arranged in parallel. The presence of this moradisaurine in the Middle Permian of south central Asia leads us to suggest that paleogeographic changes during the Permian, with part of what is today China becoming a large peninsula of Pangea, allowed these early reptiles as well as other terrestrial vertebrates to extend their geographic ranges to this region of the Late Paleozoic supercontinent.     

ISO 14001 certification and financial performance: selection-effect versus treatment-effect

The paper explores the bi-directional relationship between ISO 14001 certification and financial performance with the aim of shedding light on whether better performance is due to the beneficial effects of ISO 14001 or due to selection-effects where better performance precedes accreditation. The study uses a five year longitudinal analysis to compare the financial performance of firms in Spain before and after certification. The results of a multivariate panel data analysis find that firms with better than average performance have a greater propensity to pursue accreditation but there is no evidence that improvements in performance follow certification. This suggests that the inference that environmental variables cause improved financial performance may be unwise in research studies that can only measure association.     

Applying the precautionary principle to consumer household cleaning product development

Hazardous chemicals are pervasive in household disinfectant products. Many ingredients have established associations with acute and chronic human health conditions as well as with environmental damage. Although these associations are suggested but not proven, they are of great concern. This article describes the application of the precautionary principle to the selection of an anti-microbial active ingredient for a botanical disinfectant when significant uncertainty exists around the hazard and risk of traditional disinfectant active ingredients. We show that application of the precautionary principle does not stifle innovation and facilitates a responsible approach to product development.     

Environmental and economic assessment of a greenhouse waste heat exchange

As the economic costs of energy and the negative externalities associated with the combustion of fossil fuels threaten the economic viability of greenhouses in northern climates there is a renewed interest in the use of waste heat. This paper presents a technical and economic methodology to determine the viability of establishing waste heat greenhouses using the waste heat from industrial processes in northern climates. A case study is presented of an exchange between a tomato greenhouse and a flat glass manufacturing plant, which found the waste heat system is significantly more economic to operate than a purely natural gas system.     

Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures

Fibre reinforced polymer (FRP) materials are being increasingly used in several applications, but especially in the construction and transportation industries. The composites industry is now producing a wide range of FRP products that include strengthening strips and sheets, reinforcing bars, structural profiles, sandwich panels, moulded planks and piping. The waste management of FRP materials, in particular those made with thermosetting resins, is a critical issue for the composites industry because these materials cannot be reprocessed. Therefore, most thermosetting FRP waste is presently sent to landfill, in spite of the significant environmental impact caused by disposing of it in this way. Because more and more waste is being produced throughout the life cycle of FRPs, innovative solutions are needed to manage it. This paper first presents a state-of-the-art review of the present alternatives available to manage FRP waste. It then describes an experimental study conducted on the technical feasibility of incorporating the fine waste generated during the manufacturing of glass fibre reinforced polymer (GFRP) composites in concrete mixtures. Tests were carried out to evaluate the fresh-state and hardened-state properties of concrete mixes in which between 0% and 20% of sand was replaced by GFRP fine waste. Although the incorporation of high proportions of GFRP waste was found to worsen concrete performance in terms of both mechanical and durability-related properties, it seems feasible to incorporate low proportions and reuse GFRP fine waste in concrete, particularly in non-structural applications such as architectural concrete or pavement slabs, where good mechanical properties are less important.     

Health implications of radon distribution in living rooms and bedrooms in U.K. dwellings--a case study in Northamptonshire

Environmental radon exposure of residents of domestic premises in the United Kingdom (UK) and elsewhere in Europe is estimated on the basis of the measured radon concentrations in, and the relative occupancies of, the principal living room and bedroom. While studies on radon concentration variability in the individual units in apartment blocks in various countries have been described, little data has been reported on variability in two-storey single-family dwellings, and the majority of extant studies consolidate living room and bedroom data early in the analysis. To investigate this further, detailed analysis was made of radon concentration data from a set of thirty-four homes situated in areas of Northamptonshire known to exhibit high radon levels. All homes were of typical UK construction of brick/block/stone walls under a pitched tile/slate roof. Approximately 50% of the sample were detached houses, the remainder being semi-detached (duplex) or terraced (row-house). Around 25% of the sample possessed cellars, while 12% were single-storey dwellings (bungalows), reflecting the typical incidence of this type of dwelling in England. In the two-storey homes, all monitored bedrooms were on the upper floor. Distribution of the ratios of bedroom/living room radon concentrations (BR/LR ratio) in individual properties was left-skewed (mean 0.67, median 0.73, range 0.05-1.05) with a tail extending to just above 1.0. The mean is consistent with the outcome of earlier extensive studies in England, while the variability depends principally on the characteristics of the property, and not on seasonal factors. In a small set of homes, the BR/LR ratio was anomalously low, (mean 0.3). BR/LR ratios in single-storey homes clustered around a value of 1.0, indicating that house design, rather than lifestyle, is the dominant factor in determining bedroom radon concentrations. Homes with higher mean annual radon concentrations showed lower BR/LR ratios, supporting our proposal that, in some homes, radon emanation from building materials may comprise a significant component of the overall radon level.     

Activity ratios of 137Cs, 90Sr and 239+240Pu in environmental samples

Both global and Chernobyl fallout have resulted in environmental contamination with radionuclides such as 137Cs, 90Sr and 239+240Pu. In environmental samples, 137Cs and 239+240Pu can be divided into the contributions of either source, if also the isotopes 134Cs and 238Pu are measurable, based on the known isotopic ratios in global and Chernobyl fallout. No analogous method is available for 90Sr. The activity ratios of Sr to Cs and Pu, respectively, are known for the actual fallout mainly from air filter measurements; but due to the high mobility of Sr in the environment, compared to Cs and Pu, these ratios generally do not hold for the inventory many years after deposition. In this paper we suggest a method to identify the mean contributions of global and Chernobyl fallout to total Sr in soil, sediment and cryoconite samples from Alpine and pre-Alpine regions of Austria, based on a statistical evaluation of Sr/Cs/Pu radionuclide activity ratios. Results are given for Sr:Cs, Sr:Pu and Cs:Pu ratios. Comparison with fallout data shows a strong depletion of Sr against Cs and Pu.     

Trends in the spatial and temporal distribution of 129I and 99Tc in coastal waters surrounding Ireland using Fucus vesiculosus as a bio-indicator

Spatial and temporal trends in (129)I and (99)Tc concentrations around the Irish coastline have been evaluated using Fucus vesiculosus as a bio-indicator. (129)I concentrations in a recent set of seawater samples have also been recorded and reveal an identical spatial pattern. Concentrations of (129)I in Fucus from the northeast coast of Ireland proved to be at least two orders of magnitude higher than concentrations in Fucus from the west coast. The (129)I content of Fucus increased significantly between 1985 and 2003, in line with increases in discharges of (129)I from the Sellafield nuclear reprocessing plant. Similar trends were observed in the case of (99)Tc. (129)I/(99)Tc ratios in Irish seawater were deduced from the Fucus data, and compared to ratios in discharges from Sellafield and from the French reprocessing plant at Cap de la Hague. Levels of (129)I and (99)Tc in Fucus from the west coast were found to be enhanced with respect to levels in seaweeds from other regions in the Northern Hemisphere unaffected by discharges from nuclear installations such as those referred to.     

Intra-cultivar variability of the soil-to-grain transfer of fallout 137Cs and 90Sr for winter wheat

Differences between the root uptake of fallout radionuclides by different cultivars ('inter-cultivar' variability) growing on the same field may be influenced not only by genetic differences of the cultivars, but also by the spatial variability of the soil-to-grain transfer within the cultivation area of each cultivar. This 'intra-cultivar' variability was investigated in 2001 and 2002 for 137Cs and 90Sr using three winter wheat cultivars with four replicates for each cultivar at three different sites in Bavaria, Germany. The intra-cultivar variability proved to be in the same range as the inter-cultivar variability which was determined earlier at the same sites for both radionuclides. An ANOVA of the 137Cs data set revealed that the variability of the 137Cs soil-to-grain transfer was caused by the soil and climate (year) at the field sites and the interaction of cultivar and field. A significant contribution of the factor 'cultivar' alone to the variability could not be detected. This may be due to the complex environmental conditions to which plants are exposed in field experiments. To find wheat cultivars with minimal uptake of fallout radionuclides it may be better to examine the molecular mechanisms of their root uptake in order to identify targets for breeding "safer" plants.