Analysis and comparison of inertinite-derived adsorbent with conventional adsorbents

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples. In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850 degrees C for time spans of 60, 90, and 120 min, using steam and carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4 x 6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite from coal can be beneficially reused as an adsorbent for air or water pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons. Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal.     

Potential Impact of Clean Air Act Regulations on Nitrogen Fate and Transport in the Neuse River Basin: a Modeling Investigation Using CMAQ and SWAT

There has been extensive analysis of Clean Air Act Amendment (CAAA) regulation impacts to changes in atmospheric nitrogen deposition; however, few studies have focused on watershed nitrogen transfer particularly regarding long-term predictions. In this study, we investigated impacts of CAAA NOx emissions on the fate and transport of nitrogen for two watersheds in the Neuse River Basin. We applied the Soil and Water Assessment Tool (SWAT) using simulated deposition rates from the Community Multiscale Air Quality (CMAQ) model. Two scenarios were investigated: one that considered CAAA emission controls in CMAQ simulation (with) and a second that did not (without). By 2020, results showed a 70 % drop in nitrogen discharge for the Little River watershed and a 50 % drop for the Nahunta watershed from 1990 levels under the with-CAAA scenario. Denitrification and plant nitrogen uptake played important roles in nitrogen discharge from each watershed. Nitrogen watershed response time to a change in atmospheric nitrogen deposition was 4 years for Nahunta and 2 years for Little River. We attribute these differences in nitrogen response time to contrasts in agricultural land use and diversity of crop types. Soybean, hay, and corn land covers had comparatively longer response times to changes in atmospheric deposition. The studied watersheds demonstrate relatively large nitrogen retention: ≥80 % of all delivered nitrogen.     

Use of a food web model to evaluate the factors responsible for high PCB fish concentrations in Lake Ellasjøen, a high Arctic Lake

Background, aim, and scope

Lake Ellasjøen, located in the Norwegian high arctic, contains the highest concentrations of polychlorinated biphenyls (PCBs) ever recorded in fish and sediment from high arctic lakes, and concentrations are more than 10 times greater than in nearby Lake Øyangen. These elevated concentrations in Ellasjøen have been previously attributed, in part, to contaminant loadings from seabirds that use Ellasjøen, but not Øyangen, as a resting area. However, other factors, such as food web structure, organism growth rate, weight, lipid content, lake morphology, and nutrient inputs from the seabird guano, also differ between the two systems. The aim of this study is to evaluate the relative influence of these factors as explanatory variables for the higher PCB fish concentrations in Ellasjøen compared with Øyangen, using both a food web model and empirical data.

Methods

The model is based on previously developed models but parameterized for Lakes Ellasjøen and Øyangen using measured data wherever possible. The model was applied to five representative PCB congeners (PCB 105, 118, 138, 153, and 180) using measured sediment and water concentrations as input data and evaluated with previously collected food web data.

Results

Modeled concentrations are within a factor of two of measured concentrations in 60% and 40% of the cases in Lakes Ellasjøen and Øyangen, respectively, and within a factor of 10 in 100% of the cases in both lakes. In many cases, this is comparable to the variability associated with the data as well as the efficacy of the predictions of other food web model applications.

Discussion

We next used the model to quantify the relative importance of five major differences between Ellasjøen and Øyangen by replacing variables representing each of these factors in the Ellasjøen model with those from Øyangen, in separate simulations. The model predicts that the elevated PCB concentrations in Ellasjøen water and sediment account for 49%–58% of differences in modeled fish PCB concentrations between lakes. These elevated sediment and, to a lesser extent, water concentrations in Ellasjøen are due to PCB loadings from seabird guano. However, sediment–water fugacity ratios of PCBs are consistently greater in Ellasjøen compared with Øyangen, which suggests that internal lake processes also contribute to differences in sediment and water concentrations. We hypothesize that the nutrients associated with guano influence sediment–water fugacity ratios of PCBs by increasing the stock of pelagic algae. As both these algae and the guano settle, their organic carbon content is degraded faster than PCBs, which causes an extra magnification step in Ellasjøen before these detrital particles are consumed by benthic organisms, which are in turn consumed by fish. The model predicts that the remaining ～50% of the differences in PCB concentrations observed between the fish of these lakes are due to other subtle differences in their food web structures.

Conclusions

In conclusion, based on the results of a food web model, we found that the most dominant factors influencing the higher PCB fish concentrations in Lake Ellasjøen compared with Øyangen are the higher sediment and water concentrations in Ellasjøen, caused by seabird guano. Together, sediment and water are predicted to account for 49%–58% of differences in fish concentrations between lakes. Although seabird guano provides a source of nutrients to the lake, in addition to contaminants, empirical data and indirect model results suggest that nutrients are not leading to decreased bioaccumulation, in contrast to what has been observed in temperate, pelagic food webs.

Recommendations and perspectives

The results of this study emphasize the importance of considering even small differences in food web structure when comparing bioaccumulation in two lakes; although the food web structures of Ellasjøen and Øyangen differ only slightly, the model predicts that these differences account for most of the remaining ～50% of the differences in PCB fish concentrations between the two lakes. This study further demonstrates the utility of food web models as we were able to predict and tease apart the influence of various factors responsible for the elevated concentrations in the fish from Lake Ellasjøen, which would have been difficult using the field data alone.     

Impacts of freshwater wetlands on water quality: A landscape perspective

In this article, we suggest that a landscape approach might be useful in evaluating the effects of cumulative impacts on freshwater wetlands. The reason for using this approach is that most watersheds contain more than one wetland, and effects on water quality depend on the types of wetlands and their position in the landscape. Riparian areas that border uplands appear to be important sites for nitrogen processing and retention of large sediment particles. Fine particles associated with high concentrations of phosphorus are retained in downstream wetlands, where flow rates are slowed and where the surface water passes through plant litter. Riverine systems also may play an important role in processing nutrients, primarily during flooding events. Lacustrine wetlands appear to have the least impact on water quality, due to the small ratio of vegetated surface to open water. Examples are given of changes that occurred when the hydrology of a Maryland floodplain was altered.     

A dynamic model for intertemporal allocation of old-growth forests in the Pacific Northwest

Across the globe, continued policy debates regarding the management of old-growth forests center around the difficult task of balancing economic and ecological considerations. Though the forests of the Pacific Northwest United States are among the most studied old-growth ecosystems, ecological and economic analyses have yielded public land management directives that remain controversial. Specifically, the recently adopted Northwest Forest Plan lacks explicit goals for maintaining intergenerational equity for the use of forest resources and the diversity of old-growth ecosystems. Unlike previous studies which rely on monetary quantification of costs and benefits, this study develops and applies a conceptual framework for evaluating socially optimal Pacific Northwest old-growth forest utilization strategies. Conditions for the optimal management of old-growth forests are derived using dynamic programming. The objective function synthesizes relevant biological and economic attributes of the old-growth allocation problem. Results in the form of extraction paths are compared given social pressure for consumptive and non-consumptive benefits, as well as different planning horizons, rates of social time preference, and environmental variance. Lengthening the planning horizon results in a vast divergence of optimal policies in the absence of discounting. Extraction rates appear to approach zero as the planning horizon approaches infinity. While higher rates of social time preference increase the rate of extraction, forest stocks remaining at the terminal time period equal levels remaining with a lower discount rate. Increasing environmental variance results in a higher level of stock remaining at the terminal time period. This analysis, while specific to the old-growth controversy of the Pacific Northwest, does provide general guidelines for addressing similar problems of multiple uses of natural areas, particularly where such uses are mutually incompatible, or where one use may be irreversibly destructive to another.     

Contour Farming Based on Natural Vegetative Strips: Expanding the Scope for Increased Food Crop Production on Sloping Lands in Asia

In the agriculture of the future, there is a compelling place for agroecologically-based practices alongside practices based on the best available chemical, genetic, and engineering components. This paper explores this issue in the context of the development and spread of a conservation farming system based on natural vegetative contour buffer strips in smallholder production systems in southeast Asia. Farmers adapted contour hedgerow farming practices into a simpler, buffer-strip system as a labor-saving measure to conserve soil and sustain yields on steeply sloping cropland in Claveria, Mindanao, Philippines. Permanent-ridge tillage systems were also adapted to smallholder farming systems by researchers. Natural vegetative buffer strips resulted in gradually increasing yields, with an estimated benefit of 0.5t/ha/crop. They were seen to increase land values, facilitate investment in more intensive and profitable cropping systems, and expand the land base for food crop agriculture. They induced an institutional innovation of farmer-led Landcare organizations, which have spread this and other agroforestry practices to thousands of households in the southern Philippines.     

Future areas of investigation regarding the problem of urban road dust

In a number of metropolitan areas of the country, failure to attain national primary air quality standards for total suspended particulates (TSP) has fostered a detailed reexamination of the nature of the urban TSP problem. Reentrained dust from paved streets and other traffic-related emissions are now recognized as major sources of TSP in urban areas. While numerous reports and studies have examined this subject, some significant aspects of urban road dust have not been studied in enough detail, if at all. Examples of this are the effects of gutters and pavement composition and shape. This paper discusses those areas of the urban road dust problem that are felt to require further attention and outlines the priorities with which the data should be obtained.     

A MATHEMATICAL MODEL FOR OPTIMUM DESIGN AND CONTROL OF METROPOLITAN WASTEWATER MANAGEMENT SYSTEMS1

ABSTRACT: A comprehensive mathematical model (Urban Wastewater Management Model) has been developed to continuously simulate time-varying wastewater flows and qualities in complex metropolitan combined sewerage systems. The model serves three functions: (1) assessment of existing or planned system performance in relation to other wastewater discharges in either a metropolitan or river basin area; (2) determination of the optium operation or automatic control of existing or planned systems during rainstorms; and (3) determination of the most economically feasible combination of design alternatives for improving or expanding existing systems to meet specified performance criteria. The model provides an efficient engineering tool for evaluating and controlling pollutant discharges from combined sewerage systems (including treatment plants) to receiving waters, while considering the time and spacial variations of rainfall and dry-weather flows and qualities as well as economic constraints.