Radiolytic decomposition of environmental contaminants and site remediation using an electron accelerator

Halogenated and nonhalogenated hydrocarbon contaminants are currently found in natural waterways, groundwater, and soils as a result of spills and careless disposal practices. The development of proper treatment methodologies for the waste streams producing this environmental damage is now a subject of growing concern. A significant number of these waste stream compounds are chemically stable and are thus resistant to environmental degradation. Numerous researchers have investigated the use of ionizing radiation to decompose chlorinated hydrocarbons in diverse matrices and have proposed various free-radical-induced reaction mechanisms. This article is divided into two sections. First, we present data on experimentally measured, radiolytically induced decomposition of hazardous wastes and toxic substances using accelerator-generated bremsstrahlung sources and gamma radiation from cobalt-60. Data are presented on the radiolytically induced reduction in concentration of volatile organic compounds (VOCs) dissolved in water and in air, polychlorinated biphenyls (PCBs) dissolved in oil, high explosives dissolved in groundwater, and chemical weapon surrogates. The results of these studies suggest the potential use of ionizing radiation as a method of hazardous waste treatment. The second section of this article describes the technical aspects of a field-scale radiolytic decomposition site cleanup demonstration using an electron accelerator. A portable, commercially available electron accelerator was set up at the Lawrence Livermore National Laboratory's (LLNL's) Site 300, a Superfund site, where vacuum extraction wells were removing trichloroethylene (TCE) vapor from a ground spill into the unsaturated soil zone. The accelerator was retrofitted into the existing vacuum extraction system such that the extracted TCE-containing vapor passed through the accelerator beam for treatment. The concentration of TCE in the vapor was reduced by an amount dependent on the accelerator beam power. Production of reaction products in the vapor was measured as a function of absorbed dose.     

Activation of waste MDF sawdust charcoal and its reactive dye adsorption characteristics

This paper reports an experimental investigation of converting waste medium density fibreboard (MDF) sawdust into chars and activated carbon using chemical activation and thermal carbonisation processes. The MDF sawdust generated during the production of architectural mouldings was characterised and found to have unique properties in terms of fine particle size and high particle density. It also has a high content of urea formaldehyde resin used as a binder in the manufacturing of MDF board. Direct thermal carbonisation and chemical activation of the sawdust by metal impregnation and acid (phosphoric acid) treatment prior to pyrolysis treatment were carried out. The surface morphology of the raw dust, its chars and activated carbon were examined using scanning electron microscopy (SEM). Adsorptive properties and total pore volume of the materials were also analysed using the BET nitrogen adsorption method. Liquid adsorption of a reactive dye (Levafix Brilliant red E-4BA) by the derived sawdust carbon was investigated in batch isothermal adsorption process and the results compared to adsorption on to a commercial activated carbon (Filtrasorb F400). The MDF sawdust carbon exhibited in general a very low adsorption capacity towards the reactive dye, and physical characterisation of the carbon revealed that the conventional chemical activation and thermal carbonisation process were ineffective in developing a microporous structure in the dust particles. The small size of the powdery dust, the high particle density, and the presence of the urea formaldehyde resin all contributed to the difficulty of developing a proper porous structure during the thermal and chemical activation process. Finally, activation of the dust material in a consolidated form (cylindrical pellet) only achieved very limited improvement in the dye adsorption capacity. This original study, reporting some unexpected outcomes, may serve as a stepping-stone for future investigations of recycle and reuse of the waste MDF sawdust which is becoming an increasing environmental and cost liability.     

The hydrolysis of Zectran in buffered and natural waters.

The analyses and rates of hydrolysis of Zectran, 4-dimethylamino-3,5-xylyl methylcarbamate are reported in aqueous media. These rates were measured in phosphate buffered, distilled water and in natural waters where tempteratures of 10 degrees, 20 degrees, and 28 degrees C. and pH values of 5.94, 7.00, and 8.42 were used. Intial concentrations of Zectran exceeded 60 mg/l (0.27 mMol 1(-1), whereas in the natural waters initial concentrations were 30 mg/l (0.135 mMol 1(-1). This study shows that the persistance of Zechtran in natural waters is, in large part, dependent upon the pH value and the temperature.     

Implementing REDD+ (Reducing Emissions from Deforestation and Degradation): evidence on governance,evaluation and impacts from the REDD-ALERT project

The REDD-ALERT (Reducing Emissions from Deforestation and Degradation from Alternative Land Uses in the Rainforests of the Tropics) project started in 2009 and finished in 2012, and had the aim of evaluating mechanisms that translate international-level agreements into instruments that would help change the behaviour of land users while minimising adverse repercussions on their livelihoods. Findings showed that some developing tropical countries have recently been through a forest transition, thus shifting from declining to expanding forests at a national scale. However, in most of these (e.g. Vietnam), a significant part of the recent increase in national forest cover is associated with an increase in importation of food and timber products from abroad, representing leakage of carbon stocks across international borders. Avoiding deforestation and restoring forests will require a mixture of regulatory approaches, emerging market-based instruments, suasive options, and hybrid management measures. Policy analysis and modelling work showed the high degree of complexity at local levels and highlighted the need to take this heterogeneity into account—it is unlikely that there will be a one size fits all approach to make Reducing Emissions from Deforestation and Degradation (REDD+) work. Significant progress was made in the quantification of carbon and greenhouse gas (GHG) fluxes following land-use change in the tropics, contributing to narrower confidence intervals on peat-based emissions and their reporting standards. There are indications that there is only a short and relatively small window of opportunity of making REDD+ work—these included the fact that forest-related emissions as a fraction of total global GHG emissions have been decreasing over time due to the increase in fossil fuel emissions, and that the cost efficiency of REDD+ may be much less than originally thought due to the need to factor in safeguard costs, transaction costs and monitoring costs. Nevertheless, REDD+ has raised global awareness of the world’s forests and the factors affecting them, and future developments should contribute to the emergence of new landscape-based approaches to protecting a wider range of ecosystem services.