River water quality management model using genetic algorithm

Conventional mathematical programming methods, such as linear programming, non linear programming, dynamic programming and integer programming have been used to solve the cost optimization problem for regional wastewater treatment systems. In this study, a river water quality management model was developed through the integration of a genetic algorithm (GA). This model was applied to a river system contaminated by three determined discharge sources to achieve the water quality goals and wastewater treatment cost optimization in the river basin. The genetic algorithm solution, described the treatment plant efficiency, such that the cost of wastewater treatment for the entire river basin is minimized while the water quality constraints in each reach are satisfied. This study showed that genetic algorithm can be applied for river water quality modeling studies as an alternative to the present methods.     

Degradation of azo dyes in water by Electro-Fenton process

The degradation of the azo dyes azobenzene, p-methyl red and methyl orange in aqueous solution at room temperature has been studied by an advanced electrochemical oxidation process (AEOPs) under potential-controlled electrolysis conditions, using a Pt anode and a carbon felt cathode. The electrochemical production of Fenton's reagent (H₂O₂, Fe²⁺) allows a controlled in situ generation of hydroxyl radicals (^·OH) by simultaneous reduction of dioxygen and ferrous ions on the carbon felt electrode. In turn, hydroxyl radicals react with azo dyes, thus leading to their mineralization into CO₂ and H₂O. The chemical composition of the azo dyes and their degradation products during electrolysis were monitored by high performance liquid chromatography (HPLC). The following degradation products were identified: hydroquinone, 1,4-benzoquinone, pyrocatechol, 4-nitrocatechol, 1,3,5-trihydroxynitrobenzene and p-nitrophenol. Degradation of the initial azo dyes was assessed by the measurement of the chemical oxygen demand (COD). Kinetic analysis of these data showed a pseudo-first order degradation reaction for all azo dyes. A pathway of degradation of azo dyes is proposed. Specifically, the degradation of dyes and intermediates proceeds by oxidation of azo bonds and aromatic ring by hydroxyl radicals. The results display the efficiency of the Electro-Fenton process to degrade organic matter. Electronic Publication     

Effects of Ni, Cr, Hg, Cu, Zn, Al on the dissolved oxygen balance of streams

Inorganic metals besides their direct toxic effects, carry the potential of causing serious variations on existing ecosystems in receiving waters. Self purification mechanism is vital for the continuity of the existing micro and macro living organisms in the streams. This mechanism is effected from the existence of metals. In this study, interferences of HgCl2, HgSO4, Ni(NO3)2, CrCl3, CuSO4.5H2O, K2Cr2O7, ZnSO4.7H2O and Al2(SO4)3.18H2O metal compounds on respirometric BOD and related effects on the self purification, are investigated with the representative formations of DO deficit curves. In the presence of these metals, streamwater BOD parameters and related DO deficit curve formations are significantly effected.     

Electrochemical oxidation of azo dyes in water: a review

Environmental Chemistry Letters - Pollution of waters by azo dyes is a major global issue because some azo dyes have carcinogenic and mutagenic effects. Therefore, advanced methods are required to...     

Fast and complete removal of the 5-fluorouracil drug from water by electro-Fenton oxidation

Cytostatic drugs are a troublesome class of emerging pollutants in water owing to their potential effects on DNA. Here we studied the removal of 5-fluorouracil from water using the electro-Fenton process. Galvanostatic electrolyses were performed with an undivided laboratory-scale cell equipped with a boron-doped diamond anode and a carbon felt cathode. Results show that the fastest degradation and almost complete mineralization was obtained at a Fe²⁺ catalyst concentration of 0.2 mM. The absolute rate constant for oxidation of 5-fluorouracil by hydroxyl radicals was 1.52 × 10⁹ M^?1 s^?1. Oxalic and acetic acids were initially formed as main short-chain aliphatic by-products, then were completely degraded. After 6 h the final solution mainly contained inorganic ions (NH₄ ⁺, NO₃ ^? and F^?) and less than 10% of residual organic carbon. Hence, electro-Fenton constitutes an interesting alternative to degrade biorefractory drugs.     

Soil properties and root biomass responses to prescribed burning in young Corsican pine (Pinus nigra Arn.) stands

Fire is an important tool in the management of forest ecosystems. Although both prescribed and wildland fires are common in Turkey, few studies have addressed the influence of such disturbances on soil properties and root biomass dynamics. In this study, soil properties and root biomass responses to prescribed fire were investigated in 25-year-old corsican pine (Pinus nigra Arn.) stands in Kastamonu, Turkey. The stands were established by planting and were subjected to prescribed burning in July 2003. Soil respiration rates were determined every two months using soda-lime method over a two-year period. Fine (0-2 mm diameter) and small root (2-5 mm diameter) biomass were sampled approximately bimonthly using sequential coring method. Mean daily soil respiration ranged from 0.65 to 2.19 g Cm(-2) d(-1) among all sites. Soil respiration rates were significantly higher in burned sites than in controls. Soil respiration rates were correlated significantly with soil moisture and soil temperature. Fine root biomass was significantly lower in burned sites than in control sites. Mean fine root biomass values were 4940 kg ha(-1) for burned and 5450 kg ha(-1) for control sites. Soil pH was significantly higher in burned sites than in control sites in 15-35 cm soil depth. Soil organic matter content did not differ significantly between control and burned sites. Our results indicate that, depending on site conditions, fire could be used successfully as a tool in the management of forest stands in the study area.     

Performance improvement potential of sensor embedded products in environmental supply chains

Environmental supply chain is a desirable alternative to traditional supply chain due to new and stricter environmental regulations by local governments and increasing consumer awareness towards environmental issues. The two most common types of environmental supply chains are reverse supply chains and closed-loop supply chains. In reverse or closed-loop supply chains, collected used products are subjected to one of four recovery options, viz., reuse, recycling, remanufacturing or disposal. Regardless of the chosen recovery option, all products are disassembled up to some level. However, there is a high level of uncertainty associated with the disassembly yield due to non-functional and/or missing components. Sensor embedded products (SEPs) is a viable approach to cope with this uncertainty since they involve sensors which can detect non-functional and/or missing components prior to disassembly. This study presents a quantitative assessment of the impact of SEPs on the various performance measures of a kanban-controlled disassembly line. First, separate design of experiments studies based on Orthogonal Arrays are carried out for conventional products and SEPs. Then, the results of paired t-tests comparing the two cases based on different performance measures are presented.     

The seasonal distribution of heavy metals in Mussel sample from Yalova in the Marmara Sea, 2008�C2009

Concentration of the some heavy metals (Co, Cu, Fe, Ni, Pb and Zn) Mediterranean mussel Mytilus galloprovincialis from Yalova (Marmara Sea) were investigated seasonally. The mean concentrations of Co, Cu, Fe, Ni, Pb and Zn in the soft tissues were 4.08 ± 0.67, 5.54 ± 0.59, 156.72 ± 20.18, 3.71 ± 1.14, 2.92 ± 0.51 and 106.23 ± 5.66 mg kg(?-1) dry weights, respectively. There were no significant differences between the metal concentrations among the seasons (P > 0.05). The mean Pb and Zn concentrations were higher than the acceptable limit proposed by International Turkish standards.     

Environmental and social impacts of the increasing number of geothermal power plants (Büyük Menderes Graben—Turkey)

Environmental Science and Pollution Research - The use of renewable energy is critical to the long-term development of global energy. Geothermal power plants (GPPs) differ in the technology they...     

An empirical note on tourism and sustainable development nexus

Environmental Science and Pollution Research - The goal of this research is to investigate the impact of tourism on sustainable development in the 10 most visited countries. For this purpose,...