Hepatic effects of yttrium oxide nanoflowers: in vitro risk evaluation

Yttrium oxide nanoflowers were prepared by a hydrothermal technique, and X-ray diffraction and scanning electron microscopy were used to determine their structures. The cytotoxic and genotoxic potentials of aqueous dispersions of the nanoflowers to cultured primary rat hepatocytes were examined at concentrations up to 500 mg L^?1 for 72 h. Cell viability was determined by monitoring the reduction of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, release of lactate dehydrogenase, and uptake of neutral red. Genotoxicity was assessed by the liver micronucleus assay. Exposure to Y₂O₃ nanoflowers at concentrations lower than 100 mg L^?1 did not lead to any cytotoxicity or genotoxicity. At higher concentrations (200, 400, and 500 mg L^?1), cell viability decreased and induction of micronuclei increased (400 and 500 mg L^?1).     

Stabilization of metal processing plant sludge via sequential application of phytoremediation and pyrolysis

The aim of this study is to evaluate the metal removal ability of three different plants from metal processing sludge containing Pb, Cd, and Zn. Therefore, phytoremediation and pyrolysis were sequentially applied. In the phytoremediation applications, sunflower (Helianthus annuus), corn (Zea mays), and rape (Brassica napus) seeds were sown in sludge/soil mixtures at four different levels (25/75, 50/50, 75/25, 100/0). The chelating agent, ethylenediaminetetraacetic acid, was added to the mixtures for plant uptake during phytoremediation. At the phytoremediation stage, it was noted that rape was the most effective plant for the mixture of 75/25 sludge/soil, with metal removal efficiencies ranging between 80%–90%. At the pyrolysis stage, after harvesting, contaminated plants grown in a 75/25 sludge/soil mixture were pyrolyzed at 500 °C, with a heating rate of 35 °C/min. The results show that 60%–90% of the initial metal content was held by the solid product. In addition to this, it can be concluded that pyrolysis stabilizes metals into a solid product and that this solid product can be safely landfilled as inert waste since its toxicity leaching value is lower than the limit values.     

Two‐Stage Recovery of Amphibian Assemblages Following Selective Logging of Tropical Forests

There is a lack of quantitative information on the effectiveness of selective‐logging practices in ameliorating effects of logging on faunal communities. We conducted a large‐scale replicated field study in 3 selectively logged moist semideciduous forests in West Africa at varying times after timber extraction to assess post logging effects on amphibian assemblages. Specifically, we assessed whether the diversity, abundance, and assemblage composition of amphibians changed over time for forest‐dependent species and those tolerant of forest disturbance. In 2009, we sampled amphibians in 3 forests (total of 48 study plots, each 2 ha) in southwestern Ghana. In each forest, we established plots in undisturbed forest, recently logged forest, and forest logged 10 and 20 years previously. Logging intensity was constant across sites with 3 trees/ha removed. Recently logged forests supported substantially more species than unlogged forests. This was due to an influx of disturbance‐tolerant species after logging. Simultaneously Simpson's index decreased, with increased in dominance of a few species. As time since logging increased richness of disturbance‐tolerant species decreased until 10 years after logging when their composition was indistinguishable from unlogged forests. Simpson's index increased with time since logging and was indistinguishable from unlogged forest 20 years after logging. Forest specialists decreased after logging and recovered slowly. However, after 20 years amphibian assemblages had returned to a state indistinguishable from that of undisturbed forest in both abundance and composition. These results demonstrate that even with low‐intensity logging (≤3 trees/ha) a minimum 20‐year rotation of logging is required for effective conservation of amphibian assemblages in moist semideciduous forests. Furthermore, remnant patches of intact forests retained in the landscape and the presence of permanent brooks may aid in the effective recovery of amphibian assemblages. Recuperación de Ensambles de Anfibios en Dos Etapas Después de la Tala Selectiva de Bosques Tropicales     

Measuring the spatial impacts of urbanization on the surface water resource basins in Istanbul via remote sensing

Istanbul is one of the largest metropolitan cities in the World. The city has experienced rapid industrialization and urbanization in the second half of the twentieth century. Between 1950 and 2000, the city has grown by an average of 4.5% annually. Given the scale of the growth, neither local nor the central governments have shown capability of controlling the influx of migration, most of which settled illegally on public lands. Most of the settlements lack the basic sewerage facilities, and a significant portion of which are on the major water resource basins. As of today, Istanbul Metropolitan Municipality (IMM) not only has to cope with the infrastructure problems, but also has to find ways of solving the problem of illegal occupations of public lands and water resource basins. This paper presents the land use changes in the water resource basins providing water to the Istanbul Metropolitan Area. Using four consecutive Landsat images between 1990 and 2005, the changes in 12 different land use categories are obtained via overlay operations by GIS for water resource basins surrounding the City of Istanbul. It has been observed that the most critical land use changes are in the nearest basins to the city. The capability of Landsat and IKONOS images in determining the alterations in the macro form of the city are also discussed. Finally, possibility of utilization of new technologies in policy making regarding environmental management in Istanbul is discussed.     

Estimates of soil erosion using cesium-137 tracer models

The soil erosion was studied by ¹³⁷Cs technique in Yatagan basin in Western Turkey, where there exist intensive agricultural activities. This region is subject to serious soil loss problems and yet there is not any erosion data towards soil management and control guidelines. During the soil survey studies, the soil profiles were examined carefully to select the reference points. The soil samples were collected from the slope facets in three different study areas (Kırtas, Peynirli and Kayısalan Hills). Three different models were applied for erosion rate calculations in undisturbed and cultivated sites. The profile distribution model (PDM) was used for undisturbed soils, while proportional model (PM) and simplified mass balance model (SMBM) were used for cultivated soils. The mean annual erosion rates found using PDM in undisturbed soils were 15 t ha⁻¹ year⁻¹ at the Peynirli Hill and 27 t ha⁻¹ year⁻¹ at the Kırtas Hill. With the PM and SMBM in cultivated soils at Kayışalan, the mean annual erosion rates were obtained to be 65 and 116 t ha⁻¹ year⁻¹, respectively. The results of ¹³⁷Cs technique were compared with the results of the Universal Soil Loss Equation (USLE).     

Assessment of big floods in the Eastern Black Sea Basin of Turkey

In this study, general knowledge and some details of the floods in Eastern Black Sea Basin of Turkey are presented. Brief hydro-meteorological analysis of selected nine floods and detailed analysis of the greatest flood are given. In the studied area, 51 big floods have taken place between 1955–2005 years, causing 258 deaths and nearly US $500,000,000 of damage. Most of the floods have occurred in June, July and August. It is concluded that especially for the rainstorms that have caused significantly damages, the return periods of the rainfall heights and resultant flood discharges have gone up to 250 and 500 years, respectively. A general agreement is observed between the return periods of rains and resultant floods. It is concluded that there has been no significant climate change to cause increases in flood harms. The most important human factors to increase the damage are determined as wrong and illegal land use, deforestation and wrong urbanization and settlement, psychological and technical factors. Some structural and non-structural measures to mitigate flood damages are also included in the paper. Structural measures include dykes and flood levees. Main non-structural measures include flood warning system, modification of land use, watershed management and improvement, flood insurance, organization of flood management studies, coordination between related institutions and education of the people and informing of the stakeholders.     

Determination of Pb(II), Zn(II), Cd(II), and Co(II) ions by flame atomic absorption spectrometry in food and water samples after preconcentration by coprecipitation with Mo(VI)-diethyldithiocarbamate

A new, simple, and rapid separation and preconcentration procedure, for determination of Pb(II), Cd(II), Zn(II), and Co(II) ions in environmental real samples, has been developed. The method is based on the combination of coprecipitation of analyte ions by the aid of the Mo(VI)–diethyldithiocarbamate–(Mo(VI)-DDTC) precipitate and flame atomic absorption spectrometric determinations. The effects of experimental conditions like pH of the aqueous solution, amounts of DDTC and Mo(VI), standing time, centrifugation rate and time, sample volume, etc. and also the influences of some foreign ions were investigated in detail on the quantitative recoveries of the analyte ions. The preconcentration factors were found to be 150 for Pb(II), Zn(II) and Co(II), and 200 for Cd(II) ions. The detection limits were in the range of 0.1–2.2 μg L^?1 while the relative standard deviations were found to be lower than 5 % for the studied analyte ions. The accuracy of the method was checked by spiked/recovery tests and the analysis of certified reference material (CRM TMDW-500 Drinking Water). The procedure was successfully applied to seawater and stream water as liquid samples and baby food and dried eggplant as solid samples in order to determine the levels of Pb(II), Cd(II), Zn(II), and Co(II) ions.     

Effect of high sulfate concentration on the corrosivity: a case study from groundwater in Harran Plain, Turkey

Corrosion, which tends to increase the concentrations of certain metals in tap water, is one of the most important water quality problems as it can affect public health and public acceptance of water supply and the cost of providing safe water. In this context, this study aimed at investigating the scale formation tendency or corrosivity of groundwater in the semi-arid Harran Plain. The degree of scale formation tendency/corrosivity of water was determined considering pHs, Langelier Index, and Ryznar Index of groundwater samples. Except for well no.4, which is close to a local hot spring, all the wells had corrosive characteristics. The amount of CO₂ from the soil zone respiration and high sulfate concentration in the wells are important factors affecting corrosiveness. Results showed that precipitation, excessive irrigation, and change in groundwater level caused seasonal variation in corrosive characteristics.     

Reducing the Maladaptive Attractiveness of Solar Panels to Polarotactic Insects

Abstract: Human‐made objects (e.g., buildings with glass surfaces) can reflect horizontally polarized light so strongly that they appear to aquatic insects to be bodies of water. Insects that lay eggs in water are especially attracted to such structures because these insects use horizontal polarization of light off bodies of water to find egg‐laying sites. Thus, these sources of polarized light can become ecological traps associated with reproductive failure and mortality in organisms that are attracted to them and by extension with rapid population declines or collapse. Solar panels are a new source of polarized light pollution. Using imaging polarimetry, we measured the reflection–polarization characteristics of different solar panels and in multiple‐choice experiments in the field we tested their attractiveness to mayflies, caddis flies, dolichopodids, and tabanids. At the Brewster angle, solar panels polarized reflected light almost completely (degree of polarization d ≈100%) and substantially exceeded typical polarization values for water (d ≈30–70%). Mayflies (Ephemeroptera), stoneflies (Trichoptera), dolichopodid dipterans, and tabanid flies (Tabanidae) were the most attracted to solar panels and exhibited oviposition behavior above solar panels more often than above surfaces with lower degrees of polarization (including water), but in general they avoided solar cells with nonpolarizing white borders and white grates. The highly and horizontally polarizing surfaces that had nonpolarizing, white cell borders were 10‐ to 26‐fold less attractive to insects than the same panels without white partitions. Although solar panels can act as ecological traps, fragmenting their solar‐active area does lessen their attractiveness to polarotactic insects. The design of solar panels and collectors and their placement relative to aquatic habitats will likely affect populations of aquatic insects that use polarized light as a behavioral cue.     

Degradation and mineralization of sulcotrione and mesotrione in aqueous medium by the electro-Fenton process: a kinetic study

Introduction

The degradation and mineralization of two triketone (TRK) herbicides, including sulcotrione and mesotrione, by the electro-Fenton process (electro-Fenton using Pt anode (EF-Pt), electro-Fenton with BDD anode (EF-BDD) and anodic oxidation with BDD anode) were investigated in acidic aqueous medium.

Methods

The reactivity of both herbicides toward hydroxyl radicals was found to depend on the electron-withdrawing effect of the aromatic chlorine or nitro substituents. The degradation of sulcotrione and mesotrione obeyed apparent first-order reaction kinetics, and their absolute rate constants with hydroxyl radicals at pH?3.0 were determined by the competitive kinetics method.

Results and discussion

The hydroxylation absolute rate constant (k _abs) values of both TRK herbicides ranged from 8.20?×?10⁸ (sulcotrione) to 1.01?×?10⁹ (mesotrione) L?mol^?1?s^?1, whereas those of the TRK main cyclic or aromatic by-products, namely cyclohexane 1,3-dione , (2-chloro-4-methylsulphonyl) benzoic acid and 4-(methylsulphonyl)-2-nitrobenzoic acid, comprised between 5.90?×?10⁸ and 3.29?×?10⁹?L?mol^?1?s^?1. The efficiency of mineralization of aqueous solutions of both TRK herbicides was evaluated in terms of total organic carbon removal. Mineralization yields of about 97?C98% were reached in optimal conditions for a 6-h electro-Fenton treatment time.

Conclusions

The mineralization process steps involved the oxidative opening of the aromatic or cyclic TRK by-products, leading to the formation of short-chain carboxylic acids, and, then, of carbon dioxide and inorganic ions.