山西省水资源综合开发利用的重点与途径

山西省是缺水的能源大省。从地表水、地下水、过境水和边界水等不同利用类型水体的开发利用 ,以及节约用水、污水净化和废水的重复利用等五个方面 ,论述了山西省水资源综合开发利用的重点与途径。     

Global sensitivity analysis of a process-based model for ammonia emissions from manure storage and treatment structures

The development of process-based models to estimate ammonia emissions from animal feeding operations (AFOSs) is sought to replace costly and time-consuming direct measurements. Critical to process-based model development is conducting sensitivity analysis to determine the input parameters and their interactions that contribute most to the variance of the model output. Global and relative sensitivity analyses were applied to a process-based model for predicting ammonia emissions from the surface of anaerobic lagoons for treating and storing manure. The objectives were to compare global sensitivity analysis (GSA) to relative (local) sensitivity analysis (RSA) on a process-based model for ammonia emissions. Based on the first-order coefficient, both GSA and RSA showed the model input parameters in order of importance in process model for ammonia emissions from lagoon surfaces were: (i) pH, (ii) lagoon liquid temperature, (iii) wind speed above the lagoon surface, and (iv) the concentration of ammoniacal nitrogen in the lagoon. The GSA revealed that interactions between model parameters accounted for over two-thirds of the model variance, a result that cannot be achieved using traditional RSA. Also, the GSA showed that parameter interactions involving liquid pH had more impact on the model output variance than the single parameters: (i) temperature, (ii) wind speed, or (iii) total ammoniacal nitrogen. This study demonstrates that GSA provides a more complete analysis of model input parameters and their interactions on the model output compared to RSA. A comprehensive tutorial regarding the application of GSA to a process model is presented.     

地裂缝上框架结构的抗震性能分析

地裂缝是严重影响我国人类生活、生产建设的主要地质灾害之一,是一种独特的地质灾害,近年来已引起人们的关注,它广泛分布于全国许多地方。框架结构是一种广泛使用的结构形式。由于人类活动或地质构造运动形成地裂缝,进而造成房屋开裂或倾斜。该文针对位于抗震设防区的框架结构房屋,分别用底部剪力法和PKPM静力分析法,来定量研究在地裂缝影响下框架结构的抗震性能,为双重灾害影响下结构抗震鉴定加固提供依据。     

三烧溴化锂集中制冷空调系统改建设计

武钢三烧区域改建了二台大连三洋蒸汽型双效溴化锂吸收式制冷机。叙述了该改建项目的主机选型、参数选定、设计特点等。     

Shape memory polymer snap-fits for active disassembly

This paper explores a means to simplify disassembly by engineering a snap-fit that automatically releases upon exposure to a heat field thus limiting manual labor or machine operation for disassembly. Shape memory polymer (SMP) snap-fits were designed and manufactured to actively release upon a thermal trigger. Snap-fits were designed with an added feature known here as a release angle that would allow for an uninterrupted movement for disassembly in the presence of an elevated temperature. SMP snap-fits were then manufactured and tested. Testing was performed for demonstration of the active release of the SMP snap-fits and for analysis of active disassembly (AD) process parameters. Taguchi methods were used to analyze the AD process parameters, including heating method and disassembly temperature. The results from this research show the successful demonstration of the SMP snap-fits within a manufactured product housing. AD process parameter analysis shows that both the heating method and temperature affect the AD process. The analysis determines that by increasing the heat exchange rate the snap-fit disassembly time is shortened. From the performed experiments, it was seen that an Oil bath at 150 °C produced the best results in regards to disassembly time and signal-noise ratio. The results from experimentation demonstrate the possibility of acceptable heat-releasable fasteners for more efficient disassembly and exhibit benefits over current AD elements comprised of shape memory alloys.     

人与居室环境

本文通过对居室环境概念的阐述,剖析了人与居室环境功能的关系,并指出了居室环境对人行为的规范作用及营造良好居室环境的重要性。     

Description and evaluation of a model of deposition velocities for routine estimates of dry deposition over North America. Part II: review of past measurements and model results

Numerical sensitivity tests and four months of complete model runs have been conducted for the Routine Deposition Model (RDM). The influence of individual model inputs on dry deposition velocity as a function of land-use category (LUC) and pollutant (SO₂, O₃, SO²⁻₄ and HNO₃) were examined over a realistic range of values for solar radiation, stability and wind speed. Spatial and temporal variations in RDM deposition velocity (V_d) during June – September 1996 time period generated using meteorological input from a mesoscale model run at 35 km resolution over north-eastern North America were also examined. Comparison of RDM V_d values to a variety of measurements of dry deposition velocities of SO₂, O₃, SO²⁻₄ and NHO₃ that have been reported in the literature demonstrated that RDM produces realistic results. Over northeastern NA RDM monthly averaged dry deposition velocities for SO₂ vary from 0.2 to 3.0 cm s⁻¹ with the highest deposition velocities over water surfaces. For O₃, the monthly averaged dry deposition velocities are from 0.05 to 1.0 cm s⁻¹ with the lowest values over water surfaces and the highest over forested areas. For HNO₃, the monthly averaged dry deposition velocities have the range of 0.5 to 6 cm s⁻¹, with the highest values for forested areas. For SO²⁻₄, they range from 0.05–1.5 cm s⁻¹, with the lowest values over water and the highest over forest. The monthly averaged dry deposition velocities for SO₂ and O₃ are higher in the growing season compared to the fall, but this behaviour is not apparent for HNO₃ and sulphate. In the daytime, the hourly averaged dry deposition velocities for SO₂, O₃, SO²⁻₄ and HNO₃ are higher than that in the nighttime over most of the vegetated area. The diurnal variation is most evident for surfaces with large values for leaf area index (LAI), such as forests. Based on the results presented in this paper, it is concluded that RDM V_d values can be combined with measured air concentrations over hourly, daily or weekly periods to determine dry deposition amounts and with wet deposition measurements to provide seasonal estimates of total deposition and estimates of the relative importance of dry deposition.     

职业安全卫生标准体系建设初探

职业安全卫生标准体系是企业安全科研生产工作的基础 ,是推广试行职业安全卫生管理体系 (OHSMS)的有效技术支撑条件。笔者通过分析职业安全卫生标准应用的实际 ,探索性地提出建立适应企业职业安全卫生管理、研究以及 OHSMS需要的标准化管理体系 ;论述并研讨该体系建立的思路、原则和查询方法以及应用过程的管理 ;以此为职业安全卫生管理、研究和试行OHSMS奠定基础并提供有益的帮助。