Photocatalytic degradation of the herbicide pendimethalin using nanoparticles of BaTiO3/TiO2 prepared by gel to crystalline conversion method: a kinetic approach

Photocatalytic degradation of the herbicide, pendimethalin (PM) was investigated with BaTiO3/TiO2 UV light system in the presence of peroxide and persulphate species in aqueous medium. The nanoparticles of BaTiO3 and TiO2 were obtained by gel to crystallite conversion method. These photo catalysts are characterized by energy dispersive x-ray analysis (EDX), scanning electron microscope (SEM), x-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) adsorption isotherm and reflectance spectral studies. The quantum yields for TiO2 and BaTiO3 for the degradation reactions are 3.166 Einstein m(-2) s(-1) and 2.729 Einstein m(-2) s(-1) and catalytic efficiencies are 6.0444 x 10(-7) mg(-2)h(-1)L2 and 5.403 x 10(-7) mg(-2)h(-1)L2, respectively as calculated from experimental results. BaTiO3 exhibited comparable photocatalytic efficiency in the degradation of pendimethalin as the most widely used TiO2 photocatalyst. The persulphate played an important role in enhancing the rate of degradation of pendimethalin when compared to hydrogen peroxide. The degradation process of pendimethalin followed the first-order kinetics and it is in agreement with Langmuir-Hinshelwood model of surface mechanism. The reason for high stability of pendimethalin for UV-degradation even in the presence of catalyst and oxidizing agents were explored. The higher rate of degradation was observed in alkaline medium at pH 11. The degradation process was monitored by spectroscopic techniques such as ultra violet-visible (UV-Vis), infrared (IR) and gas chromatography mass spectroscopy (GC-MS). The major intermediate products identified were: N-propyl-2-nitro-6-amino-3, 4-xylidine, (2, 3-dimethyl-5-nitro-6-hydroxy amine) phenol and N-Propyl-3, 4-dimethyl-2, 6-dinitroaniline by GC-MS analysis and the probable reaction mechanism has been proposed based on these products.     

Atmospheric deposition studies of heavy metals in Arctic by comparative analysis of lichens and cryoconite

Lichens and cryoconite (rounded or granular, brownish-black debris occurring in holes on the glacier surface) from Ny-Ålesund were used for understanding the elemental deposition pattern in the area. Lichen samples collected from low-lying coastal region and cryoconite samples from high altitudinal glacier area were processed and analysed for elements such as aluminium (Al), arsenic (As), cadmium (Cd), cobalt (Co), chromium (Cr), cesium (Cs), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb), vanadium (V) and zinc (Zn) through inductively coupled plasma mass spectrometry. Results showed that heavy metals, Al and Fe, are present in high concentration in the cryoconite samples. Al was also present in high amounts in seven of the eight lichen samples studied. The general scheme of elements in the decreasing order of their concentrations for most of the cryoconite samples was Al?>?Fe?>?Mn?>?Zn?>?V?>?Pb?>?Cr?>?Ni?>?Cu?>?Co?>?As?>?Cs?>?Cd while that for the lichen samples was Al?>?Fe?>?Zn?>?Mn?>?Pb?>?Cu?>?Cs?>?Cr?>?Ni?>?V?>?Co?>?As?>?Cd. Similarity in trends in the two sample types confirms that the environment indeed contains these elements in that order of concentration which overtime got accumulated in the samples. Overall comparison showed most elements to be present in high concentrations in the cryoconite samples as compared to the lichen samples. Within the lichens, elemental accumulation data suggests that the low-lying site (L-2) from where Cladonia mediterranea sample was collected was the most polluted accumulating a number of elements at high concentrations. The probable reasons for such deposition patterns in the region could be natural (crustal contribution and sea salt spray) and anthropogenic (local and long-distance transmission of dust particles). In the future, this data can form a baseline for monitoring quantum of atmospheric heavy metal deposition in lichens and cryoconite of Svalbard, Arctic.     

Evaluation of significant sources influencing the variation of water quality of Kandla creek, Gulf of Katchchh, using PCA

To evaluate the significant sources contributing to water quality parameters, we used principal component analysis (PCA) for the interpretation of a large complex data matrix obtained from the Kandla creek environmental monitoring program. The data set consists of analytical results of a seasonal sampling survey conducted over 2 years at four stations. PCA indicates five principal components to be responsible for the data structure and explains 76% of the total variance of the data set. The study stresses the need to include new parameters in the analysis in order to make the interpretation of principal components more meaningful. The PCA could be applied as a useful tool to eliminate multi-collinearity problems and to remove the indirect effect of parameters.     

Properties of concrete containing scrap-tire rubber--an overview

Solid waste management is one of the major environmental concerns in the United States. Over 5 billion tons of non-hazardous solid waste materials are generated in USA each year. Of these, more than 270 million scrap-tires (approximately 3.6 million tons) are generated each year. In addition to this, about 300 million scrap-tires have been stockpiled. Several studies have been carried out to reuse scrap-tires in a variety of rubber and plastic products, incineration for production of electricity, or as fuel for cement kilns, as well as in asphalt concrete. Studies show that workable rubberized concrete mixtures can be made with scrap-tire rubber. This paper presents an overview of some of the research published regarding the use of scrap-tires in portland cement concrete. The benefits of using magnesium oxychloride cement as a binder for rubberized concrete mixtures are also presented. The paper details the likely uses of rubberized concrete.     

Net primary productivity of some aquatic macrophytes in sewage-sullage mixture

Sewage-sullage mixture from Raipur city is spread over a vast area surrounding the city. This mixture has a pH always above neutrality with high turbidity. Transparency was nil with the absence of phenolphthalein alkalinity and dissolved oxygen. Hardness was high with low nitrogen and phosphorus concentration. Human consumable. acquatic macrophytes are cultivated in such waste water. Net primary productivity of three macrophytes: Ipomoea aquatica, Marsilea quadrifolia and Nelumbo nucifera were evaluated while being cultivated in such sewage-sullage mixture. Productivity was determined either with periodic biomass removal (I. aquatica and M. quadrifolia) or through removing the biomass only once at the time of growing season (N. nucifera). Growing season productivity of up to 27.48. 19.81 and 9.49 g m(-2) and day(-1) and extrapolated productivity of up to 100.30, 72.31 and 34.64 mt. ha(-1) yr(-1) was recorded for I. aquatica. M. quadrifolia and N. nucifera respectively. Thus, these macrophytes are yielding a high amount of human consumable biomass from an area which neither be a useless wetland.     

Chemical composition of fresh snow from Gulmarg, North India

The chemical composition and pH of 30 fresh snow samples collected during December 1986 to May 1987 at Gulmarg (34 degrees 03' N, 74 degrees 24' E, 2655 m above mean sea level), a remote place in north India, were studied. The snow samples were, by and large, alkaline in nature and were largely influenced by non-marine aerosols. The concentrations of cations (Ca(2+), K(+) and Mg(2+)) were more than the anions (SO(2-)(4) and NO(-)(3)). Factor analysis indicated that most of the ionic components were transported into the region during the period of measurements. The transport of ionic components could be attributed to the passage of western disturbances over this region. The comparison of concentrations of anions and cations in the snow samples at Gulmarg with those reported from a few countries in the west revealed that the composition of Gulmarg snow largely differs in the concentrations of cations rather than anions. Among the cations, the concentration of Ca(2+) was high at Gulmarg and this could be responsible for buffering the pH of snow in the alkaline range.     

Green Lean Six Sigma implementation framework: a case of reducing graphite and dust pollution

ABSTRACT

Modern organisations are in search of initiatives which will enable them to be sustainable as well as gain a competitive advantage. Lean, Six Sigma and Green initiatives are some of the widely used tools which aid the organisation to be sustainable. Recent studies have suggested that the integration of Green and Lean Six Sigma (LSS) will create a powerful methodology and help organisations to be sustainable. Yet, many organisations have found it difficult due to the lack of a generic implementation framework, which can be used for any processes and cultural context. The purpose of this study is to answer the research question: how to implement a sustainable Green LSS initiative in the organisation. Through a critical analysis of previous literature, an implementation framework is developed and practically implemented through a case study to reduce the graphite and dust pollution in a mine in India. Within case analysis, it is conducted to develop propositions, future research directions and managerial implications. This is a first study to develop and practically test a generic implementation Green LSS framework.     

Impact of urbanization on the groundwater regime in a fast growing city in central India

This paper describes the impact of urbanization on the groundwater regime in a fast growing city, Solapur, in central India, giving special emphasis on the management of the present and ultimate demand of water in 2,020 AD. The objective is to apprise the city planners and administrators of the effects of urbanization on the groundwater regime in a fast growing medium-sized city in a developing country where the infrastructure developments are not in conformity with the rapid growth in population. Solapur city with an area of 178.57 km2 receives a recharge of about 24 million m3 of groundwater from various sources annually. Reduction in recharge, as conventionally assumed due to the impact of urbanization, could not, however, be well established. Instead, there was a rise in recharge as water use in the city grew from time to time and more and more water was supplied to satisfy the human needs. Compared to mid-1970s, groundwater levels have increased within the main city area due to increased recharge and decreased groundwater abstraction. However, outside the main city area, there is a general decline in groundwater levels due to increased groundwater utilization for irrigation purposes. Groundwater quality deterioration has been highly localized. Water quality has deteriorated during the last 10 years, especially in dugwells, mainly due to misuse and disuse of these structures and poor circulation of groundwater. However, in case of borewells, comparison of the present water quality with that in mid-1970s and early 1980s does not show any perceptible change. Deeper groundwater tapped by borewells can still be used for drinking purposes with caution.     

Isolation and identification of Aeromonas caviae strain KS-1 as TBTC- and lead-resistant estuarine bacteria

Tributyltin chloride (TBTC)- and lead-resistant estuarine bacterium from Mandovi estuary, Goa, India was isolated and identified as Aeromonas caviae strain KS-1 based on biochemical characteristics and FAME analysis. It tolerates TBTC and lead up to 1.0 and 1.4 mM, respectively, in the minimal salt medium (MSM) supplemented with 0.4 % glucose. Scanning electron microscopy clearly revealed a unique morphological pattern in the form of long inter-connected chains of bacterial cells on exposure to 1 mM TBTC, whereas cells remained unaltered in presence of 1.4 mM Pb(NO₃)₂ but significant biosorption of lead (8 %) on the cell surface of this isolate was clearly revealed by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy. SDS-PAGE analysis of whole-cell proteins of this lead-resistant isolate interestingly demonstrated three lead-induced proteins with molecular mass of 15.7, 16.9 and 32.4 kDa, respectively, when bacterial cells were grown under the stress of 1.4 mM Pb (NO₃)₂. This clearly demonstrated their possible involvement exclusively in lead resistance. A. caviae strain KS-1 also showed tolerance to several other heavy metals, viz. zinc, cadmium, copper and mercury. Therefore, we can employ this TBTC and lead-resistant bacterial isolate for lead bioremediation and also for biomonitoring TBTC from lead and TBTC contaminated environment.