The Influence of Varying Algal Biomass On Contaminant Exposure in Benthic-Planktonic Mesocosms: Copper (Ii)

A series of mesocosms was exposed to a suite of light treatments and nutrient enrichment in order to generate algal communities of varying biomass. the influence of this biomass on the speciation of copper (II) was studied. Distribution coefficients (_Kd,Lkg-1) were relatively high (log_Kd = 5 to 7), indicative of robust trace metal sequestration, and were likely controlled by the particulate organic carbon content (foc). Differences in _Kd over time and among treatments were significant, as was the relationship between _Kd and foc. Fluorescence quenching was used to determine binding capacities (_Lt, M) and their associated binding constants (_Kcond,M^-1) in order to model the solid phase copper speciation. the _Kcond ranged between 2.1 and 5.2 × 10¹²M^-1, indicating a very strong copper-ligand complex, and was higher in mesocosms that received more light. the light _Lt increased over time, dramatically after the nutrient enrichment, but did not vary systematically among light treatments. _Lt ranged from 7.2 × 10- 7 to 4.9 × 10- 5 M. the large magnitudes of _Kd, _Kcond and _Lt ensured that greater than 97% of total copper in the mesocosms was complexed by organic matter. the total copper concentration ([Cu]_T, M) needed to reach a target dissolved copper concentration of 10^-12.5 M (pCu = 12.5) was determined for each mesocosm over time. [Cu]_T was between 8.02 × 10^-5 and 3.41 × 10^-2 M, and increased over time. the [Cu]_T normalized to the target pCu (Effective Dose Ratio, EDR) increased directly with increases in algal biomass, indicating a direct link between system productivity and copper exposure. Approximately 45% of the variance in EDR was explained by variance in total biomass, while the residual variance in EDR was due likely to differences in the strengths of particle associations and magnitude of binding capacities.     

Fluoride accumulation in pasture forages and soils following long-term applications of phosphorus fertilisers.

Ingestion of soils with high fluoride (F) concentration may cause chronic fluorosis in grazing animals. Analysis of New Zealand pasture soils with long-term phosphorus (P) fertilisation histories showed that total surface soil (0-75 mm depth) F concentration increased up to 217-454 mg kg-1 with P fertiliser application. One-third to two-thirds of F applied in fertilisers resides in the top 75 mm soil depth. Pasture forage accumulation of F was low, and therefore, F intake by grazing animals through pasture consumption is expected to be much lower than F intake by soil ingestion. Ten annual applications of single superphosphate (30 and 60 kg P ha-1 year-1) to a Pallic Soil (Aeric Fragiaqualf) significantly increased total F and labile F (0.01 M CaCl2 extract) concentrations to 200 and 120 mm depths, respectively, of the 300 mm depth investigated. The mobility of F in the soil profile was similar to two other elements, P and cadmium derived from the fertiliser.     

Seasonal variation of HCH isomers in open soil and plant-rhizospheric soil system of a contaminated environment

Background, aim, and scope  

Lindane, technically 1, 2, 3, 4, 5, 6-hexachlorocyclohexane (γ- HCH), is the most commonly detected organochlorine pesticide from diverse environmental compartments. Currently, India is the largest consumer and producer of lindane in the world. The production of lindane results in the generation of large quantities of waste HCH isomers (mainly α-, β- and δ-). All these isomers are toxic and have a long-range environmental transport potential. The aim of this study was to monitor the seasonal variation of HCH isomers in an open soil–plant–rhizospheric soil system of a contaminated industrial area. For this, selected plant species and their rhizospheric soil (soil samples collected at a depth range of 0–45 cm near to the root system) and open soil samples (soil samples collected (0–30 cm depth) from 1–1.5 m away from the plant root system) were collected for 2 years (two summer seasons and two winter seasons).     

Analysis of micro-cracks on machined surfaces in dry electrical discharge machining

Micro-crack formation in the heat affected zone in EDM is a common phenomenon and many measures have been perceived to minimize their occurrence. This paper presents a comprehensive and quantitative analysis of micro-crack formation, in terms of length, number and orientation of micro-cracks formed on the machined surfaces. The influence of processing conditions on crack formation is studied using the observations under scanning electron microscope (SEM). The results indicate that the micro-crack formation is the best represented in terms of average crack length. Statistical analysis of the results shows that pulse off-time (T_off), current (I), voltage (V) and electrode rotation speed (N) significantly influence the average crack length in both wall and bottom regions of the machined hole. In dry EDM, micro-crack formation occurs due to segregation of elements in the work surface and inter-diffusion of elements between work, and shield. A comparison of crack formation with the liquid dielectric EDM shows that average length and number density of micro-cracks were lower in the dry EDM than those in the liquid dielectric EDM.     

Feasibility of Applying a Stable Isotopic Tracer for Direct Determination of Dry Particulate Deposition to Soybean Plants

ABSTRACT

A stable rare-earth isotopic tracer was used to measure the deposition of KNO₃ particles on soybean leaves by direct measurement of the tracer on the plant surfaces by thermal-ionization mass spectrometry. Submicrometer particles, made from a solution containing 3 |mg mL^-1 neodymium isotope (¹⁴⁸Nd, 87.9%) and 1,000 mg mL^-1 KNO₃, were dispersed with a two-fluid nozzle and released upwind of a soybean field. Total suspended- and size-fractionated-aerosol particles were collected on an open-face filter and in a micro-orifice impactor, respectively, at a distance of 40 m from the release point. Soybean leaves exposed to the plume were collected at distances ranging from 25 to 100 m. As little as 5.5 pg of the tracer (i.e., excess ¹⁴⁸Nd) was detected in soybean leaves at signal-to-noise ratios ranging from 7,500 to 240,000, in the presence of 200 to 2,700 pg of naturally occurring Nd. The dry-particle deposition velocity, determined from the ratio of the aerial concentration and directly deposited aerosol (geometric mass mean diameter, 0.20 mm) flux, and its corresponding analytical uncertainty were 0.30 cm sec^-1 and 2.5%, respectively.