Nitrate contamination in water resources,human health risks and its remediation through adsorption: a focused review

The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate’s high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45–50 mgNO₃^?/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.

     

Development of an extraction method for perchlorate in soils

Perchlorate originates as a contaminant in the environment from its use in solid rocket fuels and munitions. The current US EPA methods for perchlorate determination via ion chromatography using conductivity detection do not include recommendations for the extraction of perchlorate from soil. This study evaluated and identified appropriate conditions for the extraction of perchlorate from clay loam, loamy sand, and sandy soils. Based on the results of this evaluation, soils should be extracted in a dry, ground (mortar and pestle) state with Milli-Q water in a 1 ratio 1 soil ratio water ratio and diluted no more than 5-fold before analysis. When sandy soils were extracted in this manner, the calculated method detection limit was 3.5 microg kg(-1). The findings of this study have aided in the establishment of a standardized extraction method for perchlorate in soil.     

Purification and Properties of Extracellular Poly(3-hydroxybutyrate) Depolymerase Produced by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> 202

An extracellular poly(3-hydroxybutyrate) (PHB) depolymerase produced by a thermotolerant fungal soil isolate, Aspergillus fumigatus 202, was purified and characterized. Maximum PHB depolymerase production was obtained at the end of 48 h with initial medium pH 7.0 and 45 °C in Bushnell Haas Minerals medium containing PHB as sole source of carbon. The PHB depolymerase was purified using size exclusion chromatography to a fold purification of 20.62 and 61.62% yield. SDS-PAGE and isoelectric focusing revealed the molecular weight and pI of the purified enzyme as 63,744 Da and 4.2, respectively. N-terminal amino acid sequence of purified enzyme was HAXDAYLVK. This non-glycosylated enzyme was most active at pH 9.0 and 45 °C. Purified enzyme was inactivated by N-bromosuccinimide and dithiothreitol suggesting the involvement of tryptophan residues and disulfide bonds at its active site. Nonionic detergents like Tween 20, Tween 80 and Triton X-100 inhibited the enzyme activity. Ions like Ca⁺² and Mg⁺² (5 mM) increased the enzyme activity 1.5 times. Fe⁺² effectively inhibited the enzyme activity to 88% whereas Hg⁺² completely inhibited the enzyme.     

Comparative performance of flat sheet and spiral wound modules in the nanofiltration of reactive dye solution

Background and purpose

Besides the opportunities for reuse, stringent regulations and growing public awareness demand an enhanced quality of effluent from dye industries. Treatment of an aqueous solution of dye (reactive red 198) was carried out in a nanofiltration unit using both flat sheet and spiral wound modules to obtain a comparative performance evaluation in terms of permeate flux and quality.

Methods

Hydrophilized polyamide membrane with molecular weight cutoff of 150 was used for the experiments. Effects of trans-membrane pressure (TMP), feed concentration and addition of salt on permeate flux were investigated. Percent reduction of color, chemical oxygen demand (COD), total dissolved solid (TDS), and conductivity were determined to assess performance of the membrane.

Results

The maximum flux decline was 16.1% of its initial value at 490 kPa TMP with 50 ppm feed concentration in spiral wound module, whereas the same in flat sheet under same conditions was 7.2%. The effect of TMP showed a quasi-linear increase in flux with increasing pressure. Increased permeate concentration led to the reduction in observed retention of dye in the membrane. The average reduction in color, COD, and TDS were 96.88%, 97.38%, and 89.24%, respectively. The decline in permeate flux was more in case of spiral wound module compared to flat sheet. However, spiral wound module performed better in terms of color removal, COD reduction, and TDS removal.

Conclusion

Substantial removal of color was achieved in the nanofiltration experiments with a marked reduction in COD and TDS. The process allowed the production of permeate stream with great reutilization possibilities.     

Reproductive toxicity of lead,cadmium, and phthalate exposure in men

Environmental toxicants viz lead or cadmium and phthalate esters (di(2-ethylhexyl) phthalate [DEHP], dibutyl phthalate [DBP], and diethyl phthalate [DEP]) widely found in different environmental strata are linked to deteriorating male reproductive health. The objective was to assess the relationships between the seminal lead, cadmium, and phthalate (DEHP, DBP, DEP) concentrations at environmental level and serum hormone levels and semen quality in non-occupationally exposed men and specify the effect of individual and combined exposure of toxicants on semen quality. A study of 60 male partners of couples attending the Andrology Laboratory of the Reproductive Biology Department, All India Institute of Medical Sciences (AIIMS), New Delhi, India for semen analysis to assess their inability to achieve a pregnancy was selected for the study. The results of univariate and stepwise multiple regression analysis in the unadjusted model showed a significant correlation between lead or cadmium and phthalates DEHP/DBP/DEP and sperm motility, sperm concentration, and DNA damage. After adjusting for potential confounders, an association with lead or DEHP was only observed. The present data shows that lead (Pb) or cadmium (Cd) or phthalates might independently contribute to decline in semen quality and induce DNA damage. Phthalates might influence reproductive hormone testosterone. These findings are significant in light of the fact that men are exposed to a volley of chemicals; however, due to the small sample size, our finding needs to be confirmed in a larger population.     

Reduction of pollutants in pulp paper mill effluent treated by PCP-degrading bacterial strains

Two PCP-degrading bacterial strains, Bacillus cereus (ITRC-S6) and Serratia marcescens (ITRC-S7) were used for the treatment of pulp and paper mill effluent at conditions; 1.0% glucose and 0.5% peptone at 30 +/- 1 degrees C at 120 rpm for 168 h of incubation. These two bacterial strains effectively reduced colour (45-52%), lignin (30-42%), BOD (40-70%), COD (50-60%), total phenol (32-40%) and PCP (85-90%) within 168 h of incubation. However, the highest reduction in colour (62%), lignin (54%), BOD (70%), COD (90%), total phenol (90%) and PCP (100%) was recorded by mixed culture treatment. The bacterial mechanism for the degradation of pulp and paper mill effluent may be explained by an increase in the cells biomass using added co-substrates resulting liberation of significant amount of chloride due to bacterial dechlorination of chlorolignins and chlorophenols this showed reduction in colour, lignin and toxicity in the effluent. Further, GC-MS analysis of ethyl acetate-extractable compounds from treated pulp paper mill effluent reinforces the bacterium capability for the degradation of lignin and pentachlorophenol, as many aromatic compounds such as 2-chlorophenol, 2, 4, 6-trichlorophenol and tetrachlorohydroquinone, 6-chlorohydroxyquinol and tetrachlorohydroquinone detected which were not present in the untreated effluent.     

Fugitive emissions opacity determination using the digital opacity compliance system (DOCS)

Maintenance of Department of Defense (DoD) weapon systems, conducting battlefield training exercises as well as meeting military construction and/or demolition schedules, invariably generate fugitive air emissions, many of which are visible. Although there is no codified federal method for quantifying fugitive emissions opacity, many state and local air regulatory agencies have instituted enforceable fugitive emission opacity standards at DoD facilities. The current study focused on comparing the performance of the digital opacity compliance system (DOCS) with U.S. Environment Protection Agency Method 9 (Method 9) certified human observers in quantifying the visible opacity associated with fugitive emissions produced using a commercial fog generator. By systematically repositioning both DOCS cameras and Method 9-certified observers during field testing, differences in method performance as a function of observational locations were documented. At both the 30- and 300-ft off-set distances, opacity levels reported by the DOCS technology and Method 9-certified smoke readers were found to be statistically different at the 99% confidence level. Alternatively, at the 90- and 150-ft off-set distances, results suggested that there was an insignificant difference at the 99% confidence level between the two methods. Comparing the magnitude of the each method's standard deviation suggested that, at the 30-ft off-set distance, the DOCS technology was consistently more precise than Method 9-certified readers regardless of the observer's downwind distance. However, at the 90, 150, and 300-ft off-set distances, method precision seemed to vary as a function of both off-set and downwind distance. The primary factor affecting the consistency in opacity measurements appeared to be the impact of ground-level air turbulence on fog plume dispersion and transport. Field observations demonstrated that localized wind shear played a critical and decisive role in how and to what extent fugitive emissions opacity could be determined, regardless of the method selected.     

Spectrophotometric determination of indiumin zinc effluent

A new extraction-spectrophotometric method for the determination of indium at ppb level in zinc effluent is described. It is based on quantitative extraction (51.2–99.2%) of the tetrabromoindate complex with toluene solution of N,N-diphenylbenzamidine and its nine analogous from sulphuric acid solutions, which allowed the extract to react with basic dye (i.e. brilliant green, malachite green, crystal violet) solution in sequence. Among the basic dyes tested, brilliant green gave the most sensitive colour reaction. The value of molar absorptivity of the amidine bromoindate extracts with brilliant green lie in the range of (0.53–1.03)×10⁵ l mole^-1 cm^-1 at absorption maximum, 630–640. With the most sensitive compound, N-(2-methyl-phenyl)-N-phenylbenzamidine(APPBA), the detection limit of the method is 13 ppb. The method is free from interferences of almost all ions associated with indium. The method has been applied for the determination of indium to zinc-effluent.     

Effect of ionizing radiation on haemoglobin of marine lamellibranchs

The effect of ionizing radiation on the iron-linked protein (haemoglobin) of the marine lamellibranchs Anadara granosa (Linn.) and Cardita antiquata (Lam.) from Bombay waters, India is discussed. Purified haemoglobin solutions were exposed to a ⁶⁰Cobalt source delivering a dose of about 4,600 rad/min, at the sample irradiation point. Radiation damage or degradation was measured spectrophometrically by studying changes in the absorption spectra following irradiation in the presence and absence of oxygen. Exposure to ionizing radiation in general caused a decrease in absorption of both haemoglobins, irrespective of location, viz extra-versus intracellular, at Soret (412 m), (540 to 42 m) and (574 to 76 m) peaks, and an increase in absorption at 510 and 630 m. Upon exposure to a higher dose, O₂Hb of C. antiquata showed an increase in absorption at the protein peak (280 m); exposure to a lower dose, however, resulted in decreased absorption. Furthermore, the changes following irradiation were dependent upon the initial state of the pigment. Oxyhaemoglobin, when exposed to radiation, oxidized to hemiglobin, and hemiglobin reduced to oxyhaemoglobin. The extracellular haemoglobin of high molecular weight (3x10⁶) of the false cockle C. antiquata was found to be extremely radio-resistant, whereas intracellular haemoglobin of low molecular weight (74,000) of the arcid clam A. granosa was highly radiosensitive, since it could not be exposed to doses exceeding 18,000 r.     

Earthworms: nature’s chemical managers and detoxifying agents in the environment: an innovative study on treatment of toxic wastewaters from the petroleum industry by vermifiltration technology

Earthworms are justifying the beliefs of Great Russian scientist Dr. Anatoly Igonin who said they are????disinfecting, detoxifying, neutralizing, protective and productive??. Studies indicate that some species of earthworms can ??bio-accumulate, biodegrade or bio-transform?? any toxic chemicals including ??heavy metals??, ??organochlorine pesticide??, ??herbicides??, and the lipophilic organic micro-pollutants like ??polycyclic aromatic hydrocarbons?? (PAHs). Worm vermicasts, due to the presence of ??hydrophilic?? groups in the ??lignin contents?? and ??humus??, also provide wonderful sites for ??adsorption?? of heavy metals and chemical pollutants in wastewater. Vermifiltration of wastewater using waste-eater earthworms is a newly conceived novel technology with several economic and environmental advantages. The earthworm??s body and the their ??vermicast?? work as a ??biofilter?? removing BOD₅ by over 90?%, COD by 60?C80?%, TDSS by 90?C95?%, and toxic chemicals and pathogens from wastewater. This was a pioneering work done on an extremely ??toxic wastewater?? from the petroleum industry. It contained mixture of ??aliphatic?? and ??aromatic?? volatile petroleum hydrocarbons (C 10?CC 36) and ??organochlorines?? originating from the cooling liquids, waste engine and gear oil, waste transmission and brake fluid, grease, spilled petrol, and diesel oil. The aliphatic fraction contained cycloalkanes as well as a complex mixture of saturated toxic hydrocarbons. The aromatic fraction mainly consisted of PAHs, which are more toxic and persistent than the aliphatic part. The chemicals of concern were the total petroleum hydrocarbons (TPH), dichloromethane (DCM), dichloroethane (DCE), and t-butyl methyl ether (tBME). The tBME compound has raised global concern recently due to its high mobility and persistence in the environment and possible carcinogenicity. About 1,000 earthworms (species Eisenia fetida) were released in the soil of vermifilter bed. They not only tolerated and survived in the toxic petroleum environment but also bio-filtered and bio-remediated the dark-brown petroleum wastewater with a pungent smell into pale-yellow and odorless water indicating disappearance of all toxic hydrocarbons. The hydrocarbons C 10?CC 14 were reduced by 99.9?%, the C 15?CC 28 by 99.8?%, and the C 29?CC 36 by 99.7?% by earthworms.