Ambivalence and conservation behaviour: An exploratory study on the recycling of metal cans

As resource conservation is an imperative for sustainable development, it is crucial to achieve a deeper understanding of the factors involved in people's decisions to recycle. This is even more so because the level of environmental concern is usually higher than the level of ecological behaviours. In this paper we take this fact as indicating that decision-making regarding conservation behaviours happens in the context of an internal debate where contradictory ideas are weighed up and the possibility of ambivalence arises. The main aim of this paper is therefore to explore how contradiction and ambivalence impact upon the attitudes, intentions and pro-ecological behaviours of the private sphere. The paper focuses specifically on the separation and deposition of metal cans, and compares the predictive capacity of beliefs, attitudes and intentions for two groups of respondents – one with a high and another with a low level of ambivalence, as assessed with a direct measure. The role of personal identity and the influence of structural constraints are also explored. Results demonstrate a clear moderating effect of experienced ambivalence, and show how beliefs, particularly negative ones, present a higher predictive capacity of the attitude in the high-ambivalence group, and personal identity plays a relevant role in predicting behaviour in both groups. We discuss the importance of pursuing the study of ambivalence when analysing decision-making in the conservation area.     

Interactions between wave action and grazing control the distribution of intertidal macroalgae

Canopy-forming macroalgae are key species on temperate rocky shores. However, there is a lack of understanding of how the relative balance of physical and biological factors controls the establishment and persistence of intertidal macroalgae. Here we present an integrated study of the relative importance of wave-induced forces and grazing for the recruitment and survival of the canopy-forming intertidal macroalgae Fucus vesiculosus and F. spiralis. A set of overtopped breakwaters provided a nearly unconfounded gradient in wave exposure between seaward and landward sides. A biomechanical analysis was performed based on empirical measurements of maximum drag forces in breaking waves, a model of long-term maximum wave height, and the breaking stress of Fucus spp. The estimated maximum flow speed (7-8 m/s) on the seaward side of the breakwaters was predicted to completely dislodge or prune Fucus spp. larger than approximately 10 cm, while dislodgment was highly unlikely on the landward side for all sizes. Experimental transplantation of Fucus spp. supported the biomechanical analysis but also suggested that mechanical abrasion may further limit survival in wave-exposed locations. Experimental removal of the limpet Patella vulgata, which was the principal grazer at this site, resulted in recruitment of Fucus spp. on the seaward side. We present a model of limpet grazing that indicates that limpet densities >5-20 individuals/m2 provide a proximate mechanism preventing establishment of Fucus spp., whereas wave action >2 m/s reduces persistence through dislodgment and battering. In a conceptual model we further propose that recruitment and survival of juvenile Fucus spp. are controlled indirectly by wave exposure through higher limpet densities at exposed locations. This model predicts that climate change, and in particular an increased frequency of storm events in the northeast Atlantic, will restrict fucoids to more sheltered locations.     

Effects of physical exercise on musculoskeletal disorders,stress and quality of life in workers

Background. The effect of physical exercise in the workplace (PEW) on health promotion of workers is contradictory. Objective. To evaluate the effects of the PEW in musculoskeletal disorders (MSDs), perception of stress and quality of life in workers. Methods. The participants were divided into two groups: control group (n?=?46) including non-participant workers of the PEW program, and PEW group (n?=?50) including workers who regularly participate in the exercise program. All workers answered the Nordic general questionnaire, the perceived stress scale and the quality-of-life questionnaire. Results. The PEW group reported a lower prevalence of MSDs for the trunk in the last 7 days and 12 months (p?=?0.021 and p?=?0.001, respectively), and for the upper limbs in the last 12 months (p?=?0.001) compared with the control group. The results for the perception of stress and quality of life showed no significant differences between the groups. Conclusion. PEW is a potential method to reduce MSDs in workers, but it was not efficient in reducing stress levels or improving the quality of life of the workers.     

Baked Foams Based on Cassava Starch Coated with Polyvinyl Alcohol with a Higher Degree of Hydrolysis

The aims of this work were to produce trays based on cassava starch, coated with polyvinyl alcohol (PVA) with a higher degree of hydrolysis (98%), and to study the effects of the coating on the mechanical and water sorption properties of the trays. Two types of PVA were tested: SELVOL? 325 (degree of polymerization?=?1000–1500) and SELVOL? 107 (degree of polymerization?=?350–650). A decrease in the water absorption capacity of 50% was observed when the coated samples were compared with the control sample after 30 min of immersion in water. It was observed in both coated samples a reduction of the initial rate of water adsorption sorption and a decrease in hydrophilicity compared with the control sample. Tensile strength and elongation were increased with application of the coatings. The use of the two types of PVA resulted in materials with similar mechanical and water sorption properties.     

Enhanced photocatalytic activity using GO/TiO<Subscript>2</Subscript> catalyst for the removal of DCA solutions

This work aimed to optimize high-performance photocatalysts based on graphene oxide/titanium dioxide (GO/TiO₂) nanocomposites for the effective degradation of aqueous pollutants. The catalytic activity was tested against the degradation of dichloroacetic acid (DCA), a by-product of disinfection processes that is present in many industrial wastewaters and effluents. GO/TiO₂ photocatalysts were prepared using three different methods, hydrothermal, solvothermal, and mechanical, and varying the GO/TiO₂ ratio in the range of 1 to 10%. Several techniques were applied to characterize the catalysts, and better coupling of GO and TiO₂ was observed in the thermally synthesized composites. Although the results obtained for DCA degradation showed a coupled influence of the composite preparation method and its composition, promising results were obtained with the photocatalysts compared to the limited activity of conventional TiO₂. In the best case, corresponding to the composite synthesized via hydrothermal method with 5% of GO/TiO₂ weight ratio, an enhancement of 2.5 times of the photocatalytic degradation yield of DCA was obtained compared to bare TiO₂, thus opening more efficient ways to promote the application of photocatalytic remediation technologies.     

The assessment of water quality in the Lower Luján River (Buenos Aires,Argentina): phytoplankton and algal bioassays

The monitoring of river phytoplankton and several hydrological, physical and chemical variables, in combination with bioassays using Selenastrum capricornutum Printz, allowed the characterisation of three distinct reaches of the Lower River Luján. The upstream stretch, characterised by the lowest depth and discharge, registered the highest nutrient, dissolved heavy metal and chlorophyll a concentrations in accordance with low phytoplankton diversity and the occurrence of several species typical of organically polluted lowland rivers. A downstream improvement, concomitant to increasing river discharge, is revealed by a progressive decrease of organic pollution parameters even though algal toxicity is registered through bioassays. The water input from the Parana River through the G. Arias Channel plays an important role in the regulation of the limnology of the Lower Luján River. As a result of marked increasing discharge, depth and width, there is a decrease in nutrient concentration and phytoplankton density and an increase in dissolved oxygen concentration. Likewise, algal growth rates in the bioassays showed less toxic effect.     

Phytoremediation of polyaromatic hydrocarbons, anilines and phenols

Phytoremediation technologies based on the combined action of plants and the microbial communities that they support within the rhizosphere hold promise in the remediation of land and waterways contaminated with hydrocarbons but they have not yet been adopted in large-scale remediation strategies. In this review plant and microbial degradative capacities, viewed as a continuum, have been dissected in order to identify where bottle-necks and limitations exist. Phenols, anilines and polyaromatic hydrocarbons (PAHs) were selected as the target classes of molecule for consideration, in part because of their common patterns of distribution, but also because of the urgent need to develop techniques to overcome their toxicity to human health. Depending on the chemical and physical properties of the pollutant, the emerging picture suggests that plants will draw pollutants including PAHs into the plant rhizosphere to varying extents via the transpiration stream. Mycorrhizosphere-bacteria and -fungi may play a crucial role in establishing plants in degraded ecosystems. Within the rhizosphere, microbial degradative activities prevail in order to extract energy and carbon skeletons from the pollutants for microbial cell growth. There has been little systematic analysis of the changing dynamics of pollutant degradation within the rhizosphere; however, the importance of plants in supplying oxygen and nutrients to the rhizosphere via fine roots, and of the beneficial effect of microorganisms on plant root growth is stressed. In addition to their role in supporting rhizospheric degradative activities, plants may possess a limited capacity to transport some of the more mobile pollutants into roots and shoots via fine roots. In those situations where uptake does occur (i.e. only limited microbial activity in the rhizosphere) there is good evidence that the pollutant may be metabolised. However, plant uptake is frequently associated with the inhibition of plant growth and an increasing tendency to oxidant stress. Pollutant tolerance seems to correlate with the ability to deposit large quantities of pollutant metabolites in the 'bound' residue fraction of plant cell walls compared to the vacuole. In this regard, particular attention is paid to the activities of peroxidases, laccases, cytochromes P450, glucosyltransferases and ABC transporters. However, despite the seemingly large diversity of these proteins, direct proof of their participation in the metabolism of industrial aromatic pollutants is surprisingly scarce and little is known about their control in the overall metabolic scheme. Little is known about the bioavailability of bound metabolites; however, there may be a need to prevent their movement into wildlife food chains. In this regard, the application to harvested plants of composting techniques based on the degradative capacity of white-rot fungi merits attention.     

A multidisciplinary study of archaeological grape seeds

We report here the first integrated investigation of both ancient DNA and proteins in archaeobotanical samples: medieval grape (Vitis vinifera L.) seeds, preserved by anoxic waterlogging, from an early medieval (seventh–eighth century A.D.) Byzantine rural settlement in the Salento area (Lecce, Italy) and a late (fourteenth–fifteenth century A.D.) medieval site in York (England). Pyrolysis gas chromatography mass spectrometry documented good carbohydrate preservation, whilst amino acid analysis revealed approximately 90% loss of the original protein content. In the York sample, mass spectrometry-based sequencing identified several degraded ancient peptides. Nuclear microsatellite locus (VVS2, VVMD5, VVMD7, ZAG62 and ZAG79) analysis permitted a tentative comparison of the genetic profiles of both the ancient samples with the modern varieties. The ability to recover microsatellite DNA has potential to improve biomolecular analysis on ancient grape seeds from archaeological contexts. Although the investigation of five microsatellite loci cannot assign the ancient samples to any geographic region or modern cultivar, the results allow speculation that the material from York was not grown locally, whilst the remains from Supersano could represent a trace of contacts with the eastern Mediterranean.     

Optimization of Methods for Detecting Hepatitis A Virus in Food

Hepatitis A virus (HAV) is currently recognized as an important human food borne pathogen, and it is one of the most resistant enteric RNA viruses, is highly infectious, and may lead to widespread outbreaks. The aim of this study was to optimize the methods to detect HAV from artificially contaminated food. To this end, strawberry and lettuce were experimentally contaminated with HAV suspension containing 6 × 10⁶ copies/ml. After contamination, HAV persistence and washing procedure were evaluated at 0, 1, 3, 7, and 9 days of storage. Five elution buffers (PBS (pH 7.4)/0.1% Tween80; 50 mM glycine/3% (wt/vol) beef extract (pH 9.5); PBS (pH 7, 4); 25 mM glycine/0.1 Tween80; and 1 M sodium bicarbonate) were used to elute the virus, and qualitative and quantitative PCR were used for HAV detection. HAV was detected by qualitative and quantitative PCR using any of the five elution buffers, but PBS was the most effective. Even after washing, HAV was detected up to 9 days after contamination by quantitative PCR. Quantitative PCR was more sensitive than qualitative PCR since samples containing viral load lower than 1.4 × 10³ copies/ml could not be detected by qualitative PCR. Quantitative PCR can be used for rapid detection of food borne viruses and will help in the monitoring and control of food borne disease.