Monitoring and modeling of long-term settlements of an experimental landfill in Brazil

Settlement evaluation in sanitary landfills is a complex process, due to the waste heterogeneity, time-varying properties and influencing factors and mechanisms, such as mechanical compression due to load application and creep, and physical–chemical and biological processes caused by the wastes decomposition. Many empirical models for the analysis of long-term settlement in landfills are reported in the literature. This paper presents the results of a settlement monitoring program carried out during 6 years in Belo Horizonte experimental landfill. Different sets of field data were used to calibrate three long-term settlement prediction models (rheological, hyperbolic and composite). The parameters obtained in the calibration were used to predict the settlements and to compare with actual field data. During the monitoring period of 6 years, significant vertical strains were observed (of up to 31%) in relation to the initial height of the experimental landfill. The results for the long-term settlement prediction obtained by the hyperbolic and rheological models significantly underestimate the settlements, regardless the period of data used in the calibration. The best fits were obtained with the composite model, except when 1 year field data were used in the calibration. The results of the composite model indicate settlements stabilization at larger times and with larger final settlements when compared to the hyperbolic and rheological models.     

Microbial degradation of 17β -estradiol and 17α -ethinylestradiol followed by a validated HPLC-DAD method

This work aimed at studying the biodegradation of two estrogens, 17α -estradiol (E2) and 17β -ethinylestradiol (EE2), and their potential metabolism to estrone (E1) by microbial consortia. The biodegradation studies were followed by High Performance Liquid Chromatography–Diode Array Detector (HPLC–DAD) using a specifically developed and validated method. Biodegradation studies of the estrogens (E2 and EE2) were carried out with activated sludge (consortium A, CA) obtained from a Wastewater Treatment Plant (WWTP) and with a microbial consortium able to degrade recalcitrant compounds, namely fluorobenzene (consortium B, CB). E2 was more extensively degraded than EE2 by CA whereas CB was only able to degrade E2. The addition of acetate as a supplementary carbon source led to a faster biodegradation of E2 and EE2. E1 was detected as a metabolite only during the degradation of E2. The 16S rRNA gene sequence analyses of strains recovered from the degrading cultures revealed the presence of the genera Pseudomonas, Chryseobacterium and Alcaligenes. The genera Pseudomonas and Chryseobacterium were retrieved from cultures supplied with E2 and EE2, while the genus Alcaligenes was found in the presence of E2, suggesting that they might be involved in the degradation of these compounds.     

Cadmium and zinc in vegetation and litter of a voluntary woodland that has developed on contaminated sediment-derived soil

Vegetation that develops spontaneously on metal-contaminated soils presents an opportunity to evaluate both metal bioavailability and the risks posed to biota. The behavior of Cd and Zn in the species of a spontaneously developed woodland, colonizing a canal embankment, has been investigated. Nitric-acid-extractable metal concentrations in the sediment-derived substrate ranged between 5.0 to 376 mg kg(-1)dry wt. Cd and 83.0 to 784 mg kg(-1)dry wt. Zn. The woodland is dominated by Willow (Salix) species. Salix caprea selectively accumulated Cd in all stem tissues, in contrast to S. viminalis, which regulated tissue Cd content. Both species showed an effective regulation of tissue Zn. Cadmium uptake by S. caprea was correlated with differences in soil pH, while Zn uptake was not. There was no relationship between tissue metal concentrations and soil metal nitric acid-extractable concentrations. Other aspects of ecosystem function appeared unaffected by the elevated Cd flux in S. caprea; leaf litter organisms present represented all major groups and there was no accumulation of organic matter. The woodland represents a potentially sustainable option for remediating a low value site with difficult access that does not involve removal of the contaminated material to a landfill or making a permanent inert cover.     

Risk homeostasis theory, utility and accident loss in a simulated driving task

The suggestion that utility is logically necessary for behavioural adjustments to be made in response to changes in intrinsic risk is fundamental to risk homeostasis theory (RHT). However, the methodology used to investigate RHT — analysis of road traffic accidents — is ill-suited to the investigation of this assertion. The role of utility and intrinsic risk as possible determinants of behavioural compensation were therefore examined experimentally across 14 specific behaviours using the Aston Driving Simulator. RHT predicts that these two factors act in a multiplicative way to form a statistical interaction. It also predicts that the behavioural pathways through which the effect manifests itself should be reconcilable with the concept of utility. Both predictions received little support in this experiment, suggesting that utility and intrinsic risk operate as independent factors: both factors produced significant main effects across a number of behaviours. This finding, if it can be generalised, implies that, contrary to mathematically-based models of danger compensation and the traditional model of risk homeostasis, utility is not logically necessary for behavioural compensation in response to a change in intrinsic risk.     

Method for determining minimum pool requirements to maintain and enhance salmonid fisheries in small Wyoming reservoirs

Methods for determination of minimum pool levels in reservoirs that consider sport fishery values are being sought by managers. We developed a technique for assessing the effects of incremental changes in minimum pool levels on potential salmonid abundance in small (<100 surface hectares at full pool) reservoirs in Wyoming managed for irrigation and municipal water supplies. The method has two components. One component is used to determine the minimum pool level needed to eliminate the risk of overwinter loss of salmonids due to low dissolved oxygen concentrations. The other component predicts the potential biomass of salmonids in reservoirs as a function of water depth and total dissolved solids concentration of the reservoir water. Application of the method is demonstrated for two reservoirs in Wyoming. The unit is jointly supported by the University of Wyoming, the Wyoming Game and Fish Department, and the US Fish and Wildlife Service.     

Use of sequential extraction to assess the influence of sewage sludge amendment on metal mobility in Chilean soils

In Chile, the increasing number of plants for the treatment of wastewater has brought about an increase in the generation of sludge. One way of sludge disposal is its application on land; this, however involves some problems, some of them being heavy metal accumulation and the increase in organic matter and other components from sewage sludge which may change the distribution and mobility of heavy metals. The purpose of the present study was to determine the effect of sewage sludge application on the distribution of Cr, Ni, Cu, Zn and Pb in agricultural soils in Chile. Three different soils, two Mollisols and one Alfisol, were sampled from an agricultural area in Central Chile. The soils were treated with sewage sludge at the rates of 0 and 30 ton ha(-1), and were incubated at 25 degrees C for 45 days. Before and after incubation, the soils were sequentially extracted to obtain labile (exchangeable and sodium acetate-soluble), potentially labile (soluble in moderately reducing conditions, K4P2O7-soluble and soluble in reducing conditions) and inert (soluble in strong acid oxidizing conditions) fractions. A two-level factored design was used to assess the effect of sludge application rate, incubation time and their interaction on the mobility of the elements under study. Among the metals determined in the sludge, zinc has the highest concentration. However, with the exception of Ni, the total content of metals was lower than the recommended limit values in sewage sludge as stated by Chilean regulations. Although 23% of zinc in sludge was in more mobile forms, the residual fraction of all metals was the predominant form in soils and sludge. The content of zinc only was significantly increased in two of the soils by sewage sludge application. On the other hand, with the exception of copper, the metals were redistributed in the first four fractions of amended soils. The effect of sludge application rate, incubation time and their interaction depended on the metal or soil type. In most cases an increase in more mobile forms of metals in soils was observed as the final effect.     

Using the WTO/TBT enquiry point to monitor tendencies in the regulation of environment, health, and safety issues affecting the chemical industry

The growing importance of technical regulation affecting the use and sale of chemical products is a topic of interest not only for the chemical industry, but also for governments, nongovernmental organizations, consumers, and interested communities. The results of such regulation on behalf of the environment, health and safety of individuals, as well as its economic effects on industrial activity, are well understood in the United States and recently in the European Union. In less developed countries, however, the general level of public understanding of these issues is still minimal. It is common knowledge that the so-called "regulatory asymmetry" between countries at different levels of development contributes to the establishment of technical barriers to trade. Such asymmetries, however, also have other impacts: the displacement of polluting industrial sectors to countries which have less demanding regulations, the concentration of unsafe and harmful environmental conditions in certain parts of the globe, and the competitive disadvantage for industries located in countries where control is more rigid. This study analyses information on a wide range of technical regulations issued by World Trade Organization (WTO) members, and focuses on those regulations that affect the chemical industry. This information is available through the WTO Enquiry Points, organizations created in each country to administrate the Technical Barriers to Trade Agreement (TBT). This article consists of an analysis of 4,301 notifications of technical regulations by WTO member states in the 7-year period following the establishment of the WTO in 1995. Starting from this mass of information, 585 notifications that affect the circulation or use of chemical products were isolated. Of this group, 71% refer to only 15 countries. This group of notifications was further classified according to their motivation (the environment, health, safety), by the type of product affected (medications, fuels, hazardous products, etc.), by the type of country where it was established (developed, emerging or developing) and the existing conformity assessment mechanism (prohibition, licenses, certification, labeling, etc.). Beyond identifying tendencies in specific industrial sectors, the notifications studied here reach more than 100 chemical products, substances, preparations and other materials, which are subject to various levels of restrictions in different parts of the globe because of their composition or adverse reactions during their life cycles.