Fetal diagnosis of toxoplasmosis in 190 women infected during pregnancy

One hundred and ninety women who contracted toxoplasmosis after the seventh week of pregnancy underwent antenatal diagnosis, including ultrasound examination and biological tests. Tests included Toxoplasma isolation in fetal blood and amniotic fluid by mouse inoculation, specific IgM and IgA in fetal blood, and non-specific tests. Twenty fetuses had positive specific as well as non-specific tests for Toxoplasma infection. At birth, four of these presented with clinical congenital toxoplasmosis and 12 with subclinical forms. Antenatal diagnosis enabled the detection of 83 per cent of the infected fetuses. Under specific conditions, cordocentesis permits early diagnosis and considerably reduces the number of terminations of pregnancy.     

Application of rough sets analysis to identify polluted aquatic sites based on a battery of biomarkers: a comparison with classical methods

The evaluation of toxicological effects at the cellular and molecular levels in organisms are often used to determine sites subjected to contamination problems that pose a threat to the long-term survival of organisms. However, the integration of multiple measurements on the health status of organisms into a model for site discrimination is challenging. This study compares two discrimination methods which are based on rule inference: rough sets (RS) analysis and classification trees (CT) with classical multivariate discriminant analysis (DA). Site classification was attempted with six biomarkers of effects: metallothionein levels, lipid peroxidation, DNA damage, levels of lipophosphoproteins (i.e., vitellins), phagocytosis activity and haemocyte cell viability on clam (Mya arenaria) populations from the Saguenay River fjord (Quebec, Canada). Rule based methods have the advantage of complete independence from data distribution constraints in contrast to the classification methods from multivariate analysis that are more commonly used in ecotoxicology. Results show that RS and CT gave better classifications than DA because they do not require strong distributional assumptions. Moreover, RS provided classification rules that could identify the most important biomarker(s) for site discrimination. RS and CT were shown to be simple and efficient methods for classifying multivariable ecotoxicological data. This methodology would be especially useful when freedom from distributional assumptions is required.     

Evaluation of caged freshwater mussels as an alternative method for environmental effects monitoring (EEM) studies

On three occasions between 1998 and 2000, freshwater mussels were collected by divers in Lake Memphremagog during the spring and transplanted to various locations in the St-Fran?ois River (Quebec, Canada). Mussel growth was monitored by comparing total weight and length at the beginning and end of the exposure period. In 1998, mussels were caged for 60 days at 10 stations, including locations receiving treated effluents from three pulp and paper mills. Overall, there was an apparent trend of increased mussel growth from upstream to downstream along the river. However, mussels caged downstream from the effluent discharge of a bleached kraft pulp and paper mill grew more slowly than those caged immediately upstream in the river. In 1999 and 2000, we further investigated the situation in the vicinity of this bleached kraft mill. The measurements again indicated that growth of mussels in the effluent plume from this mill was reduced in comparison to sites upstream. Overall, in terms of growth, the caged mussels responded both positively and negatively to different environmental conditions. Compared with other monitoring approaches used at these sites during the same period, the caged mussel experiment results were consistent with the trends observed with the benthic invertebrate survey but not with the trends observed for fish.     

Modelling of silica diffusion experiments with Si in Boom Clay

A mathematical model describing the dissolution of nuclear glass directly disposed in clay combines a first-order dissolution rate law with the diffusion of dissolved silica in clay. According to this model, the main parameters describing the long-term dissolution of the glass are ηR, the product of the diffusion accessible porosity η and the retardation factor R, and the apparent diffusion coefficient D_app of dissolved silica in clay.For determining the migration parameters needed for long-term predictions, four Through-Diffusion (T-D) experiments and one percolation test have been performed on undisturbed clay cores. In the Through-Diffusion experiments, the concentration decrease after injection of ³²Si (radioactive labelled silica) was measured in the inlet compartment. At the end of the T-D experiments, the clay cores were cut in thin slices and the activity of labelled silica in each slice was determined. The measured activity profiles for these four clay cores are well reproducible.Since no labelled silica could be detected in the outlet compartments, the Through-Diffusion experiments are fitted by two In-Diffusion models: one model assuming linear and reversible sorption equilibrium and a second model taking into account sorption kinetics. Although the kinetic model provides better fits, due to the sufficiently long duration of the experiments, both models give approximately similar values for the fit parameters. The single percolation test leads to an apparent diffusion coefficient value about two to three times lower than those of the Through-Diffusion tests.Therefore, dissolved silica appears to be strongly retarded in Boom Clay. A retardation factor R between 100 and 300 was determined. The corresponding in situ distribution coefficient K_d is in the range 25–75 cm³ g⁻¹. The apparent diffusion coefficient of dissolved silica in Boom Clay is estimated between 2×10⁻¹³ and 7×10⁻¹³ m² s⁻¹. The pore diffusion coefficient is in the range from 6×10⁻¹¹ to 1×10⁻¹⁰ m² s⁻¹.     

Degradation mechanism of t-butyl methyl ether (MTBE) in atmospheric droplets

The aim of this study was to obtain information about the degradation of t-butyl methyl ether (MTBE; (CH(3))(3)C-O-CH(3)) in atmospheric water droplets (rain, clouds, fog). These water droplets contain hydrogen peroxide and iron ions, which are a source of the powerful oxidising radical OH degrees, particularly under solar irradiation (photo-Fenton reaction). MTBE was chosen for this work because of its current use as an oxygenated additive in gasoline.In this study we found that MTBE is not stable in the atmosphere. More than 15 intermediate products were identified, five of which were quantified (t-butyl formate (TBF), methyl acetate (MA), t-butyl alcohol (TBA), acetone (AC), formaldehyde). The evaluation of the disappearance kinetic of the main intermediate compounds shows the following activity pattern k((TBA))>k((MTBE))>k((TBF)),k>((AC)). Acetone was found to be about 15 times more stable than MTBE in atmospheric conditions. The degradation pathways are discussed on the basis of these identifications and on the degradation of the main intermediate products in similar conditions to MTBE.     

Chemical valorization of forest and agricultural by-products. Obtention, chemical characteristics, and mechanical behavior of a novel family of hydrophobic films

Esterification of hemicelluloses of the xylan family was performed in order to produce hydrophobic films. Acylation reactions were carried out with lauroyl chloride in the N,N-dimethylacetamide/lithium chloride homogeneous system using 4-dimethylaminopyridine as activator and were induced by microwave irradiation. In the experimental conditions used, 108 and 172% mass ratios were obtained for the dodecyl-grafted xylan and heteroxylan, respectively. The degrees of substitution (DS) were 1.3 (maximum 2) for xylan and 1.2 (maximum 2.1) for heteroxylan. These products were further characterized by FT-IR spectroscopy. The mechanical and thermomechanical behavior of this new family of hydrophobic films were analyzed and compared to those obtained from cellulose with a similar DS by the means of tensile tests. Our results indicate that the dodecyl-grafted xylan film presents the best rigidity-resistance to traction ratio.     

The evaluation of dioxin and dioxin-like contaminants in selected food samples obtained from the Belgian market: comparison of TEQ measurements obtained through the CALUX bioassay with congener specific chemical analyses

A limited number of different foods were analysed for dioxin-like compounds by the CALUX bioassay which is an in vitro luciferase reporter gene assay measuring chemical activation of the aryl hydrocarbon receptor. Sixty-two milk samples were obtained from a surveillance campaign, 34 meat samples and 34 fishery products were purchased from the Belgian market. Bio-analytical and chemo-analytical dioxin toxicity equivalents (TEQ) values of the same milk samples were compared. Spearman's Rank correlation coefficients of 0.72, 0.67, 0.73 were obtained respectively between CALUX-TEQ and PCDD/F-TEQ, DL-PCB-TEQ and PCDD/F+DL-PCB-TEQ. The bioassay limit of detection was 0.1 pg TEQ from 1 g animal lipid, the limit of quantification was 0.4 pg TEQ. The repeatability of the CALUX bioassay (variability of butter fat samples analysed in the same run) showed a coefficient of variation (CV) of 10%, intra laboratory reproducibility based on independent runs of the same butter fat samples showed more variation (CV of 26% for samples above 2 pg TEQ/g lipid). All milk samples with a chemical TEQ value above the current limit value in Belgium showed an elevated CALUX-TEQ concentration, above 6 pg TEQ/g lipid. No false negative results were obtained. Based on the good correlation between CALUX-TEQ and chemically measured TEQ levels, the CALUX bioassay can be recommended as a screening tool for routine measurement of potentially toxic PHAHs in milk samples. Chemical analyses could then largely be restricted to positive samples, in order to identify the nature and to quantify the concentration of the chemicals that give the positive signal. Meat samples showed lower CALUX-TEQ values per gram lipid compared to fish samples. The fish samples showed a wider range of CALUX-TEQ values than the meat samples.     

Displacement and sweep efficiencies in a DNAPL recovery test using micellar and polymer solutions injected in a five-spot pattern

Soil washing with micellar solutions is a promising alternative for the remediation of DNAPL source zones. As with any flushing technology, the success of soil washing with micellar solutions depends in a very large part on the ability of the solution to contact the contaminant (sweep efficiency) and then on the efficiency of contaminant removal once this contact is made (displacement efficiency). We report here on a field test where a micellar solution was used to recover a DNAPL in an open five-spot pattern in which polymer solutions were also injected before and after the washing solution to improve sweep efficiency. The washing solution formulation was optimised in the laboratory prior to the test to obtain good dissolution capacity. For a high-concentration and low-volume soil flushing remediation test such as the one performed (0.8 pore volumes of actual washing solution injected), slug sizing of the washing solution is critical. It was evaluated by an analytical solution. In a five-spot pattern, the displacement efficiency of the washing solution was observed to vary in the porous medium as a function of the radial distance from the injection well because: (1) the volume of the washing solution flowing through a section of the test cell changes (maximum close to the injection well and minimal at the pumping wells); (2) the in situ velocity changes (maximum at the wells and minimum between the wells) and; (3) the contact time of the washing solution with the NAPL changes as a function of the distance from the injection well. The relative importance of the recovery mechanisms, mobilisation and dissolution, was also observed to vary in the test cell. The reduced velocity increased the contact time of the washing solution with the DNAPL enhancing its dissolution, but the decrease of the capillary number caused less mobilisation. The washing process is much more extensive around the injection well. The use of an injection-pumping pattern allowing a complete sweep of the remediated area is essential. Following a comprehensive characterisation, modeling is an efficient tool to design the injection-pumping scheme and to optimise injection and pumping rates providing the best areal sweep. The vertical sweep can be controlled by using a polymer solution (Xanthan gum). The polymer solution also has a positive effect on front stability between the solutions injected. The injection rate of the polymer solution that follows the washing solution must be kept minimal initially to prevent dilution of the washing solution by fingering.     

Photochemistry and environment. VII- The photohydrolysis of chlorobenzene: Studies of the excited state involved

Chlorobenzene excited in dilute aqueous solution is transformed quantitatively into phenol ($\text{ф= 0.10±0.02}$). This reaction involves a triplet state, since it is quenched by biacetyl and sensitized by ketones. Based on quenching experiments, the lifetime of the lowest triplet of chlorobenzene was measured as 30 ns. From the sensitized phosphorescence of biactyl, the quantum yield of intersystem crossing (S₁→T₁) was found to be 0.6 ±0.1. The photophysical characteristics of chlorobenzene are identical in acetonitrile (). Photosensitization of the photohydrolysis is observed with acetone and acetone D6 in aqueous solution. The quantum yield of the sensitized photohydrolysis is limited to 0.06±0.01. Hexadeuterated acetone appeared to be a more specific photosensitizer than acetone.