两种典型持久性有机污染物对草履虫急性毒性初探

滴滴涕和苯并芘这两种典型持久性有机污染物在环境中已广泛分布,因此,本研究利用单细胞真核模式生物-草履虫来研究其急性毒性效应,结果发现其毒性效应存在显著的剂量效应关系.DDT和BaP的半数致死浓度分别为126.012 mg·L-1和180.167 mg·L-1,且这两种污染物的浓度和概率间存在很好的线性关系.不同浓度的D...     

Monitoring and identification of spatiotemporal landscape changes in multiple remote sensing images by using a stratified conditional Latin hypercube sampling approach and geostatistical simulation

This study develops a stratified conditional Latin hypercube sampling (scLHS) approach for multiple, remotely sensed, normalized difference vegetation index (NDVI) images. The objective is to sample, monitor, and delineate spatiotemporal landscape changes, including spatial heterogeneity and variability, in a given area. The scLHS approach, which is based on the variance quadtree technique (VQT) and the conditional Latin hypercube sampling (cLHS) method, selects samples in order to delineate landscape changes from multiple NDVI images. The images are then mapped for calibration and validation by using sequential Gaussian simulation (SGS) with the scLHS selected samples. Spatial statistical results indicate that in terms of their statistical distribution, spatial distribution, and spatial variation, the statistics and variograms of the scLHS samples resemble those of multiple NDVI images more closely than those of cLHS and VQT samples. Moreover, the accuracy of simulated NDVI images based on SGS with scLHS samples is significantly better than that of simulated NDVI images based on SGS with cLHS samples and VQT samples, respectively. However, the proposed approach efficiently monitors the spatial characteristics of landscape changes, including the statistics, spatial variability, and heterogeneity of NDVI images. In addition, SGS with the scLHS samples effectively reproduces spatial patterns and landscape changes in multiple NDVI images.     

Distribution pattern, behavior, and fate of antibacterials in urban aquatic environments in South China

Occurrence, behavior and fate of several groups of antibacterials were investigated in municipal wastewater, sewage sludge, and urban river water in China. Fluoroquinolones (e.g., ciprofloxacin, norfloxacin, and ofloxacin), macrolides (dehydroerythromycin, roxithromycin, and clarithromycin), sulfonamides (sulfamethoxazole and sulfamethazine) and trimethoprim were ubiquitously detected in the wastewater in China. Fluoroquinolones were generally the most abundant in the raw sewage, with a maximum concentration of up to 6415 ng L(-1) observed for norfloxacin. Sulfonamides and macrolides transported predominantly in the aqueous phase. A median percentage of 67% of sulfonamides and 86% of macrolides remained in the final effluent after treatment in sewage treatment plants. On the contrary, sorption played a significant role in transport of fluoroquinolones and approximately half of the fluoroquinolones finally ended up and persisted in the dewatered sludge. In the urban section of the Pearl River at Guangzhou, sulfonamides, trimethoprim, and macrolides were widely present at median concentrations of 22-735 ng L(-1), whereas fluoroquinolones were only occasionally detected at 2-152 ng L(-1), probably due to their strong tendency of partition to sediment and/or photodegradability. The result of principal components analysis suggests input of non-sewage derived sulfamethazine in the Pearl River. Seasonal variations of the antibacterials distribution in the wastewater are mainly ascribed to different consumption. Dilution effect by precipitation, however, also plays an important role in seasonal distribution of the antibacterials in the Pearl River.     

1780-1819年华北平原水旱灾害社会响应方式的转变

历史时期水旱灾害的社会响应典型案例重建是气候变化影响与适应研究的重要方向。选取1780-1819年间华北平原发生的4次典型水旱灾害(1785、1792、1813年旱灾及1801年水灾),基于清代档案资料和历史气候重建结果提取代用指标,对其灾情严重程度、政府救灾力度和灾民行为进行了量化描述和对比分析,发现:①4次灾害中赈济密度(赈灾物资数/成灾州县数)逐次下降,1813年旱灾中降至不足1785年旱灾的1/6,政府救灾力度遭到严重削弱;②灾民行为日益失控,从1792年旱灾和1801年水灾中的大规模跨区域迁徙,发展到1813年旱灾中大量加入盗匪和起义军,走向暴力。这一转变的发生,是在自然(气候突变、灾害增多)、社会(政府财政危机、人地矛盾激化)不利背景之下,政府与灾民的互动关系日趋消极的结果。     

VOC emission caps constrained by air quality targets based on response surface model: A case study in the Pearl River Delta Region, China

Because of the recent growth in ground-level ozone and increased emission of volatile organic compounds (VOCs), VOC emission control has become a major concern in China. In response, emission caps to control VOC have been stipulated in recent policies, but few of them were constrained by the co-control target of PM_2.5 and ozone, and discussed the factor that influence the emission cap formulation. Herein, we proposed a framework for quantification of VOC emission caps constrained by targets for PM_2.5 and ozone via a new response surface modeling (RSM) technique, achieving 50% computational cost savings of the quantification. In the Pearl River Delta (PRD) region, the VOC emission caps constrained by air quality targets varied greatly with the NO_x emission reduction level. If control measures in the surrounding areas of the PRD region were not considered, there could be two feasible strategies for VOC emission caps to meet air quality targets (160 µg/m³ for the maximum 8-hr-average 90th-percentile (MDA8-90%) ozone and 25 µg/m³ for the annual average of PM_2.5): a moderate VOC emission cap with <20% NOx emission reductions or a notable VOC emission cap with >60% NO_x emission reductions. If the ozone concentration target were reduced to 155 µg/m³, deep NO_x emission reductions is the only feasible ozone control measure in PRD. Optimization of seasonal VOC emission caps based on the Monte Carlo simulation could allow us to gain higher ozone benefits or greater VOC emission reductions. If VOC emissions were further reduced in autumn, MDA8-90% ozone could be lowered by 0.3-1.5 µg/m³, equaling the ozone benefits of 10% VOC emission reduction measures. The method for VOC emission cap quantification and optimization proposed in this study could provide scientific guidance for coordinated control of regional PM_2.5 and O₃ pollution in China.     

Aging of PVDF and PES ultrafiltration membranes by sodium hypochlorite: Effect of solution pH

Sodium hypochlorite (NaClO) is a commonly applied cleaning agent for ultrafiltration membranes in water and wastewater treatment. Long-term exposure to NaClO might change the properties and performance of polymeric membranes, and ultimately shorten membrane lifespan. Active species in NaClO solution vary with solution pH, and the aging effects can change depending on the membrane material. In this study, the aging of polyvinylidene fluoride (PVDF) and polyethersulfone (PES) membranes by NaClO at pH 3–11 was investigated by examining variations in chemical composition, surface charge, surface morphology, mechanical strength, permeability, and retention ability. Polyvinyl pyrrolidone (PVP), which was blended in both membranes, was oxidized and dislodged due to NaClO aging at all investigated pH values, but the oxidation products and dislodgement ratio of PVP varied with solution pH. For the PVDF membrane, NaClO aging at pH 3–11 caused a moderate increase in permeability and decreased retention due to the oxidation and release of PVP. The tensile strength decreased only at pH 11 because of the defluorination of PVDF molecules. For the PES membrane, NaClO aging at all investigated pH resulted in chain scission of PES molecules, which was favored at pH 7 and 9, potentially due to the formation of free radicals. Therefore, a decrease in tensile strength and retention ability, as well as an increase in permeability, occurred in the PES membrane for NaClO aging at pH 3–11. Overall, the results can provide a basis for selecting chemical cleaning conditions for PVDF and PES membranes.     

Green and efficient degradation of cefoperazone sodium by Bi4O5Br2 leading to the production of non-toxic products: Performance and degradation pathway

Photocatalytic process represents a promising approach to overcome the pollution challenge associated with the antibiotics-containing wastewater. This study provides a green, efficient and novel approach to remove cephalosporins, particularly cefoperazone sodium (CFP). Bi₄O₅Br₂ was chosen for the first time to systematically study its degradation for CFP, including the analysis of material structure, degradation performance, the structure and toxicity of the transformation products, etc. The degradation rate results indicated that Bi₄O₅Br₂ had an excellent catalytic activity leading to 78% CFP removal compared with the pure BiOBr (38%) within 120 min of visible light irradiation. In addition, the Bi₄O₅Br₂ presents high stability and good organic carbon removal efficiency. The effects of the solution pH (3.12 - 8.75) on catalytic activity revealed that CFP was mainly photocatalyzed under acidic conditions and hydrolyzed under alkaline conditions. Combined with active species and degradation product identification, the photocatalytic degradation pathways of CFP by Bi₄O₅Br₂ was proposed, including hydrolysis, oxidation, reduction and decarboxylation. Most importantly, the identified products were all hydrolysis rather than oxidation byproducts transformed from the intermediate of β-lactam bond cleavage in CFP molecule, quite different from the mostly previous studies. Furthermore, the final products were demonstrated to be less toxic through the toxicity analysis. Overall, this study illustrates the detailed mechanism of CFP degradation by Bi₄O₅Br₂ and confirms Bi₄O₅Br₂ to be a promising material for the photodegradation of CFP.     

Effective adsorption of quadrivalent cerium by synthesized laurylsulfonate green rust in a central composite design

The layered laurylsulfonate intercalated green rust (lauryl-S GR) was synthesized to evaluate the influence of synthesis parameters and aqueous conditions on the adsorption of Ce^IV. The maximum adsorption capacity of 305.58 mg/g by lauryl-S GR was predictably obtained. The pseudo-first-order kinetic model was appropriate in fitting the whole uptake process in a weak acid environment. Three isotherm models including Langmuir, Freundlich, and Tempkin were all reliable in depicting the isotherm adsorption process. The maximum monolayer adsorption capacity of lauryl-S GR towards Ce^IV was 315.46 mg/g. Ce species including CeO and Ce₂O₃ besides CeO₂ were matched in the XPS distribution, directly indicating the reduction reaction brought by Fe^II in the GR occurred to hydrated Ce^IV ions during the adsorption. Nano-sized Ce particles attached to the lauryl-S GRs after the adsorption experiments were observed in the morphological characterization. Flocculated materials were formed on the surface of the lauryl-S GR at a pH of 7, which further reduced the active sites and disrupted the continuous uptake of Ce^IV to the lauryl-S GR. This study expands the application of GRs and supplies an ideal iron-based material for the construction of the affiliated recovery pathway to the traditional separation of Ce.     

Identification of close relationship between atmospheric oxidation and ozone formation regimes in a photochemically active region

Understanding ozone (O₃) formation regime is a prerequisite in formulating an effective O₃ pollution control strategy. Photochemical indicator is a simple and direct method in identifying O₃ formation regimes. Most used indicators are derived from observations, whereas the role of atmospheric oxidation is not in consideration, which is the core driver of O₃ formation. Thus, it may impact accuracy in signaling O₃ formation regimes. In this study, an advanced three-dimensional numerical modeling system was used to investigate the relationship between atmospheric oxidation and O₃ formation regimes during a long-lasting O₃ exceedance event in September 2017 over the Pearl River Delta (PRD) of China. We discovered a clear relationship between atmospheric oxidative capacity and O₃ formation regime. Over eastern PRD, O₃ formation was mainly in a NO_x-limited regime when HO₂/OH ratio was higher than 11, while in a VOC-limited regime when the ratio was lower than 9.5. Over central and western PRD, an HO₂/OH ratio higher than 5 and lower than 2 was indicative of NO_x-limited and VOC-limited regime, respectively. Physical contribution, including horizontal transport and vertical transport, may pose uncertainties on the indication of O₃ formation regime by HO₂/OH ratio. In comparison with other commonly used photochemical indicators, HO₂/OH ratio had the best performance in differentiating O₃ formation regimes. This study highlighted the necessities in using an atmospheric oxidative capacity-based indicator to infer O₃ formation regime, and underscored the importance of characterizing behaviors of radicals to gain insight in atmospheric processes leading to O₃ pollution over a photochemically active region.