Protective effects of Manasamitra vatakam on aluminum-induced nephrotoxicity,oxidative stress,and histological damage

The aim of this study was to investigate the nephroprotective and antioxidant property of Manasamitra vatakam (MMV) against aluminum (Al)-induced toxicity in rats. The kidney function marker parameters such as serum urea, uric acid, and creatinine were significantly increased in Al-treated rats as compared with controls. Similarly, the antioxidant enzyme activities such as superoxide dismutase, glutathione S-transferase, Na⁺/K⁺-ATPase and Mg-ATPase, reduced glutathione were also found significantly increased in Al-treated rats. A significantly decreased level of these parameters was observed in the MMV (orally 100?mg?kg^?1 body weight)-treated group along with a reduced level of malonaldehyde, molecular chaperones of an antioxidative stress protein, and mRNA expression of HSP70. The biochemical observations were also supported by histopathological observations. Thus, this study supports the nephroprotective and antioxidant activities of MMV.     

Aircraft-Induced Noise Levels in Some Residential Areas of Delhi

The measurements of aircraft-induced noise levels in some residential areas in the capital city of India were carried out in the month of April and May, 1996. Four areas were chosen which were located underneath the flight path. It has been found that average increase in noise levels over and above the background levels is more than 20 dBA except in case of the most distant site where it is 11 dBA. A good correlation has been found between average peak noise levels (dBA) and the population response in terms of annoyance.     

Molluscicidal activity of Sapindus mukorossi and Terminalia chebula against the freshwater snail Lymnaea acuminata

The molluscicidal activity of Sapindus mukorossi and Terminalia chebula fruit powder against the vector snail Lymnaea acuminata was time and concentration dependent. The molluscicidal activity of T. chebula fruit powder (96 h LC(50):93.59 mg L(-1)) was more pronounced than that of S. mukorossi fruit powder (96 h LC(50):119.57 mg L(-1)). Ethanolic extracts of S. mukorossi and T. chebula fruit powder were more toxic than their other organic solvent extracts. The molluscicidal activity of ethanolic extract of S. mukorossi fruit powder (24h LC(50):2.75 mg L(-1)) was more effective than the ethanolic extract of T. chebula fruit powder (24h LC(50):124.06 mg L(-1)). The 96 h LC(50) of column-purified fraction of S. mukorossi fruit powder was 5.43 mg L(-1) whereas those of T. chebula fruit powder was 7.49 mg L(-1). Column, thin layer and high performance liquid chromatography analysis demonstrates that the active molluscicidal component in S. mukorossi and T. chebula is saponin (96 h LC(50):1.31 mg L(-1)) and tannic acid (96 h LC(50):1.64 mg L(-1)), respectively. These plants may be used as potent source of molluscicides against the snail L. acuminata.     

A qualitative reliability and operability analysis of an integrated reforming combined cycle plant with CO2 capture

Most of the current CO₂ capture technologies are associated with large energy penalties that reduce their economic viability. Efficiency has therefore become the most important issue when designing and selecting power plants with CO₂ capture. Other aspects, like reliability and operability, have been given less importance, if any at all, in the literature.This article deals with qualitative reliability and operability analyses of an integrated reforming combined cycle concept. The plant reforms natural gas into a syngas, the carbon is separated out as CO₂ after a water-gas shift section, and the hydrogen-rich fuel is used for a gas turbine. The qualitative reliability analysis in the article consists of a functional analysis followed by a failure mode, effects, and criticality analysis (FMECA). The operability analysis introduces the comparative complexity indicator (CCI) concept.Functional analysis and FMECA are important steps in a system reliability analysis, as they can serve as a platform and basis for further analysis. Also, the results from the FMECA can be interesting for determining how the failures propagate through the system and their effects on the operation of the process. The CCI is a helpful tool in choosing the level of integration and to investigate whether or not to include a certain process feature. Incorporating the analytical approach presented in the article during the design stage of a plant can be advantageous for the overall plant performance.     

Designing ambient particulate matter monitoring program for source apportionment study by receptor modeling

Particulate matter (PM) receptor modeling requires specific intensive input data that is always a challenge to produce cost effectively. A well-designed monitoring program is important to collect such PM ambient data in urban areas with diverse and densely distributed sources. This paper presents a general framework for designing such a monitoring program while emphasizing appropriate quality assurance and quality control elements that are particularly applicable where limited resources are available. Topics for discussion include selection of monitoring sites, sampling and analytical techniques, and the uncertainty estimation for ambient concentration input data. The design framework is illustrated by a case study of a monitoring program for PM source apportionment in the Bangkok Metropolitan Region in which 24-h fine and coarse PM samples were collected using two collocated dichotomous samplers. Comparison between black carbon measurements by Smoke Stain reflectometry and Thermal Optical Transmittance method is highlighted.     

Climate policy in India: what shapes international, national and state policy?

At the international level, India is emerging as a key actor in climate negotiations, while at the national and sub-national levels, the climate policy landscape is becoming more active and more ambitious. It is essential to unravel this complex landscape if we are to understand why policy looks the way it does, and the extent to which India might contribute to a future international framework for tackling climate change as well as how international parties might cooperate with and support India's domestic efforts. Drawing on both primary and secondary data, this paper analyzes the material and ideational drivers that are most strongly influencing policy choices at different levels, from international negotiations down to individual states. We argue that at each level of decision making in India, climate policy is embedded in wider policy concerns. In the international realm, it is being woven into broader foreign policy strategy, while domestically, it is being shaped to serve national and sub-national development interests. While our analysis highlights some common drivers at all levels, it also finds that their influences over policy are not uniform across the different arenas, and in some cases, they work in different ways at different levels of policy. We also indicate what this may mean for the likely acceptability within India of various climate policies being pushed at the international level.     

Association between environmental exposure to p,p′-DDE and lindane and semen quality

Scientific concern exists about the toxic effect of dichlorodiphenyldichloroethylene (p, p′-DDE) and lindane on male infertility, and the mechanism underlying male reproductive toxicity of this pesticide remains unanswered. We investigated not only the possible association between the chlorinated pesticide levels and semen quality in nonoccupationally exposed men, but also the probable mode of action using mitochondrial membrane potential (MMP), reactive oxygen species (ROS), lipid peroxidation (LPO), and sperm chromatin structure assay (SCSA). A study in 278 men (21–40 years old) who visited Obstetrics and Gynecology Department, KGMU, Lucknow, for semen analysis was conducted. We performed semen analysis according to the WHO guidelines, while p, p′-DDE and lindane analysis was done by the GLC and LPO by the spectrophotometer, and the sperm mitochondrial status, ROS, and SCSA with the flow cytometer. The questionnaire data showed no significant difference in the demographic characteristics between the two groups, i.e., trying to conceive >1 year and proven fertility. However, a significant difference in the concentration of p, p′-DDE and lindane was observed between the groups. When the subjects were divided among four categories by quartile of exposure, the subjects in the highest quartile showed low sperm motility as compared to the subjects in the lowest quartile. Pearson’s correlation showed a significant negative correlation between semen p, p′-DDE, lindane level, and sperm quality and positive association with the number of cells with depolarized mitochondria, elevation in ROS production and LPO, and DNA fragmentation index (DFI). The findings are suggestive that these toxicants might cause a decline in semen quality, and these effects might be ROS, LPO, and mitochondrial dysfunction mediated.     

Solid-state fermentation: tool for bioremediation of adsorbed textile dyestuff on distillery industry waste-yeast biomass using isolated Bacillus cereus strain EBT1

Bioremediation of textile dyestuffs under solid-state fermentation (SSF) using industrial wastes as substrate pose an economically feasible, promising, and eco-friendly alternative. The purpose of this study was to adsorb Red M5B dye, a sample of dyes mixture and a real textile effluent on distillery industry waste-yeast biomass (DIW-YB) and its further bioremediation using Bacillus cereus EBT1 under SSF. Textile dyestuffs were allowed to adsorb on DIW-YB. DIW-YB adsorbed dyestuffs were decolorized under SSF by using B. cereus. Enzyme analysis was carried out to ensure decolorization of Red M5B. Metabolites after dye degradation were analyzed using UV–Vis spectroscopy, FTIR, HPLC, and GC-MS. DIW-YB showed adsorption of Red M5B, dyes mixture and a textile wastewater sample up to 87, 70, and 81 %, respectively. DIW-YB adsorbed Red M5B was decolorized up to 98 % by B. cereus in 36 h. Whereas B. cereus could effectively reduce American Dye Manufacture Institute value from DIW-YB adsorbed mixture of textile dyes and textile wastewater up to 70 and 100 %, respectively. Induction of extracellular enzymes such as laccase and azoreductase suggests their involvement in dye degradation. Repeated utilization of DIW-YB showed consistent adsorption and ADMI removal from textile wastewater up to seven cycles. HPLC and FTIR analysis confirms the biodegradation of Red M5B. GC-MS analysis revealed the formation of new metabolites. B. cereus has potential to bioremediate adsorbed textile dyestuffs on DIW-YB. B. cereus along with DIW-YB showed enhanced decolorization performance in tray bioreactor which suggests its potential for large-scale treatment procedures.     

Concentrations of heavy metals and aquatic macrophytes of Govind Ballabh Pant Sagar an anthropogenic lake affected by coal mining effluent

Five heavy metals Cu, Cd, Mn, Pb and Hg were found in high concentration from three sampling sites located in Asia’s largest anthropogenic lake Govind Ballabh Pant GBP Sagar. Concentrations of these heavy metals were measured in Water, bottom sediment and in different parts of the aquatic macrophytes collected from the reservoir. Plants collected from the lake were Eichhornia crassipes, Azolla pinnata, Lemna minor, Spirodela polyrrhiza, Potamogeton pectinatus, Marsilea quadrifolia, Pistia stratiotes, Ipomea aquqtica, Potamogeton crispus, Hydrilla verticillata and Aponogeton natans. These plants have shown the high concentrations of Cu, Cd, Mn, Pb and Hg in their different parts due to bioaccumulation. In general plant roots exhibited higher concentrations of heavy metals than corresponding sediments. A comparison between different morphological tissues of the sampled plants reveled the metal concentration in following order roots > leaves. Analyses of bottom sediment indicated the higher concentrations of Cd, Mn, Cu and Pb. Strong positive correlations were obtained between the metals in water and in plants as well as between metal in sediment and in plants. Indicating the potential of these plants for pollution monitoring of these metals.     

Pyrolysis of jute dust: effect of reaction parameters and analysis of products

Biowastes are becoming potential feedstocks for direct utilization or conversion to solid, liquid and gaseous fuels via various thermochemical routes. In this regard, jute dust which is a major agro-industrial waste in jute mills was pyrolysed in a fixed-bed reactor with an aim to study the product distribution and their characterization and to identify the optimum condition for bio-oil yield. The investigated process variables were temperature (400–700 °C), heating rate (10 and 40 °C/min) and nitrogen gas flow rate (50–250 ml/min). The yield of bio-oil is found to be maximum at 500 °C with a heating rate of 40 °C/min. However, further increase in temperature leads to decrease in bio-oil yield. Chemical compositions of the bio-oils were investigated using chromatographic and spectroscopic techniques such as ¹H NMR, FTIR and GC–MS. The heating value of the bio-oil is 26.71 MJ/kg. The study shows that jute dust have potential for conversion to bio-oil through the process of pyrolysis to supplement the petro-derived liquid fuel for heating and transportation applications after upgrading. The biochar produced as a co-product of jute dust pyrolysis can be a potential soil amendment with multiple benefits including increased soil fertility and C-sequestration.