Turbulent Diffusion Behind Vehicles: Effect of Traffic Speed on Pollutant Concentrations

Recent theoretical and experimental investigations Indicate that turbulent diffusion behind moving vehicles Is Influenced by the speed of the vehicle. Vertical wake induced turbulent diffusion, explicitly treated in the numerical ROADWAY model, is proportional to the square of the wind speed relative to the moving vehicle. Hence, the model predictions of turbulent mixing and pollutant concentrations on and downwind of a roadway are dependent upon the traffic speed. It Is expected from theoretical considerations that the effect of vehicle speed on pollutant concentrations will be more significant during stable atmospheric conditions, because in neutral and unstable conditions the vehicle-wake turbulence is quickly masked by the ambient turbulence. In this study, experimental data are utilized to evaluate the theoretical predictions of the effects of traffic speed on the ambient pollutant concentrations. The effects of vehicle speed upon ambient concentrations are investigated through wind tunnel experiments and field studies that used dual tracers. Consistent with predictions of the ROADWAY model, data obtained near the Long Island Expressway indicate that the influence of traffic speed on the ambient pollutant concentrations Is not significant during unstable and neutral conditions. The Long Island experiment did not provide sufficient field data to assess the model predictions of the traffic speed effect during stable atmospheric conditions.     

Prediction of Flue Gas Composition of an Incinerator Based on a Nonequilibrium-Reaction Approach

A nonequilibrium-reaetion model is developed to predict the flue gas composition of an incinerator for solid waste combustion and gasification. The model may also be effectively utilized to predict the composition of exit gas from the primary chamber of an incinerator where invariably substoichiometrie combustion conditions exist The model assumes that the drying and pyrolysis of waste occurs in sequence followed by combustion of devolatilized gas and residue separately. The model is applied to the combustion of pine wood, and the flue gas compositions are computed as a function of operating parameters such as temperature (1100 to 1500 K), initial moisture content (0 to 40 percent), and percentage excess air (up to 100 percent). The model is extended to include substoichiometric combustion (to simulate the gasification process without steam injection) to compare its predictions with the available experimental data. The general agreement of theory and experiment is good.     

Economic analysis of best management practices to reduce watershed phosphorus losses

In phosphorus-limited freshwater systems, small increases in phosphorus (P) concentrations can lead to eutrophication. To reduce P inputs to these systems, various environmental and agricultural agencies provide producers with incentives to implement best management practices (BMPs). In this study, we examine both the water quality and economic consequences of systematically protecting saturated, runoff-generating areas from active agriculture with selected BMPs. We also examine the joint water quality/economic impacts of these BMPs-specifically BMPs focusing on barnyards and buffer areas. Using the Variable Source Loading Function model (a modified Generalized Watershed Loading Function model) and net present value analysis (NPV), the results indicate that converting runoff-prone agricultural land to buffers and installing barnyard BMPs are both highly effective in decreasing dissolved P loss from a single-farm watershed, but are also costly for the producer. On average, including barnyard BMPs decreases the nutrient loading by about 5.5% compared with only implementing buffers. The annualized NPV for installing both buffers on only the wettest areas of the landscape and implementing barnyard BMPs becomes positive only if the BMPs lifetime exceeds 15 yr. The spatial location of the BMPs in relation to runoff producing areas, the time frame over which the BMPs are implemented, and the marginal costs of increasing buffer size were found to be the most critical considerations for water quality and profitability. The framework presented here incorporates estimations of nutrient loading reductions in the economic analysis, and is applicable to farms facing BMP adoption decisions.     

Validation of an in situ solidification/stabilization technique for hazardous barium and cyanide waste for safe disposal into a secured landfill

The aim of the present study was to devise and validate an appropriate treatment process for disposal of hazardous barium and cyanide waste into a landfill at a Common Hazardous Waste Treatment Storage Disposal Facility (CHWTSDF). The waste was generated during the process of hardening of steel components and contains cyanide (reactive) and barium (toxic) as major contaminants. In the present study chemical fixation of the contaminants was carried out. The cyanide was treated by alkali chlorination with calcium hypochlorite and barium by precipitation with sodium sulfate as barium sulfate. The pretreated mixture was then solidified and stabilized by binding with a combination of slag cement, ordinary Portland cement and fly ash, molded into blocks (5 × 5 × 5 cm) and cured for a period of 3, 7 and 28 days. The final experiments were conducted with 18 recipe mixtures of waste + additive:binder (W:B) ratios. The W:B ratios were taken as 80:20, 70:30 and 50:50. The optimum proportions of additives and binders were finalized on the basis of the criteria of unconfined compressive strength and leachability. The leachability studies were conducted using the Toxicity Characteristic Leaching Procedure. The blocks were analyzed for various physical and leachable chemical parameters at the end of each curing period. Based on the results of the analysis, two recipe mixtures, with compositions – 50% of [waste + (120 g Ca(OCl)₂ + 290 g Na₂SO₄) kg^?1 of waste] + 50% of binders, were validated for in situ stabilization into a secured landfill of CHWTSDF.     

Poverty alleviation as a pathway to sustainable forest management

In a major deviation from conventional joint forest management approaches where the emphasis of management is on provision of forest products to the participating villagers, the Tamil Nadu Afforestation Project (TAP) focused on poverty alleviation as the principal means to achieve sustainable forest management. This study assesses the effectiveness of TAP’s strategy in improving the ecology and socio-economic conditions of forest fringe villages using a diverse set of research methods. Results indicate that in a span of four to seven years, there was significant increase in forest cover, biodiversity, and agricultural productivity. The project villages have also shown considerable progress in various indicators of socio-economic development. The authors, however, suggest continued poverty alleviation and promotion of alternative livelihood opportunities to place the programme on a stable ground. Meeting the development needs of local villagers through strong and durable institutional linkages is also suggested for the programme to sustain and succeed.     

Environmental impact of plantations in and around the petroleum refinery: a case study

Plantation or green belt (GB) grown around the factories and industrial premises improves the condition of land, mitigates air pollution (as the plants serve as a sink for pollutants and check the flow of dust, etc.), and reduces the level of noise pollution. The software developed by NEERI for the determination of the optimal width of GB in and around an industry is based on the pollution attenuation coefficient of selected plant species of deciduous trees existing in the region. The assessment of the impact of these plantations/green belts of 500-m width in and around a petroleum refinery in the west coast of India is evaluated for reducing/managing various waste generated, and it is observed that the overall efficiency is more than 60%.     

Real-time bias-adjusted O3 and PM2.5 air quality index forecasts and their performance evaluations over the continental United States

The National Air Quality Forecast Capacity (NAQFC) system, which links NOAA’s North American Mesoscale (NAM) meteorological model with EPA’s Community Multiscale Air Quality (CMAQ) model, provided operational ozone (O₃) and experimental fine particular matter (PM_2.5) forecasts over the continental United States (CONUS) during 2008. This paper describes the implementation of a real-time Kalman Filter (KF) bias-adjustment technique to improve the accuracy of O₃ and PM_2.5 forecasts at discrete monitoring locations. The operational surface-level O₃ and PM_2.5 forecasts from the NAQFC system were post-processed by the KF bias-adjusted technique using near real-time hourly O₃ and PM_2.5 observations obtained from EPA’s AIRNow measurement network. The KF bias-adjusted forecasts were created daily, providing 24-h hourly bias-adjusted forecasts for O₃ and PM_2.5 at all AIRNow monitoring sites within the CONUS domain. The bias-adjustment post-processing implemented in this study requires minimal computational cost; requiring less than 10 min of CPU on a single processor Linux machine to generate 24-h hourly bias-adjusted forecasts over the entire CONUS domain.The results show that the real-time KF bias-adjusted forecasts for both O₃ and PM_2.5 have performed as well as or even better than the previous studies when the same technique was applied to the historical O₃ and PM_2.5 time series from archived AQF in earlier years. Compared to the raw forecasts, the KF forecasts displayed significant improvement in the daily maximum 8-h O₃ and daily mean PM_2.5 forecasts in terms of both discrete (i.e., reduced errors, increased correlation coefficients, and index of agreement) and categorical (increased hit rate and decreased false alarm ratio) evaluation metrics at almost all locations during the study period in 2008.     

Fluoride in groundwater, Varaha River Basin, Visakhapatnam District, Andhra Pradesh, India

Excess intake of fluoride through drinking water causes fluorosis on human beings in many States of the country (India), including Andhra Pradesh. Groundwater quality in the Varaha River Basin located in the Visakhapatnam District of Andhra Pradesh has been studied, with reference to fluoride content, for its possible sources for implementing appropriate management measures, according to the controlling mechanism of fluoride concentration in the groundwater. The area occupied by the river basin is underlain by the Precambrian Eastern Ghats, over which the Recent sediments occur. Results of the chemical data of the groundwater suggest that the considerable number of groundwater samples show fluoride content greater than that of the safe limit prescribed for drinking purpose. Statistical analysis shows that the fluoride has a good positive relation, with pH and bicarbonate. This indicates an alkaline environment, as a dominant controlling mechanism for leaching of fluoride from the source material. Other supplementary factors responsible for the occurrence of fluoride in the groundwater are evapotranspiration, long contact time of water with the aquifer material, and agricultural fertilizers. A lack of correlation between fluoride and chloride, and a high positive correlation between fluoride and bicarbonate indicate recharge of the aquifer by the river water. However, the higher concentration of fluoride observed in the groundwater in some locations indicates insufficient dilution by the river water. That means the natural dilution did not perform more effectively. Hence, the study emphasizes the need for surface water management structures, with people's participation, for getting more effective results.     

Estimating trace gas and aerosol emissions over South America: Relationship between fire radiative energy released and aerosol optical depth observations

Contemporary human activities such as tropical deforestation, land clearing for agriculture, pest control and grassland management lead to biomass burning, which in turn leads to land-cover changes. However, biomass burning emissions are not correctly measured and the methods to assess these emissions form a part of current research area. The traditional methods for estimating aerosols and trace gases released into the atmosphere generally use emission factors associated with fuel loading and moisture characteristics and other parameters that are hard to estimate in near real-time applications. In this paper, fire radiative power (FRP) products were extracted from Moderate Resolution Imaging Spectroradiometer (MODIS) and from the Geostationary Operational Environmental Satellites (GOES) fire products and new South America generic biomes FRE-based smoke aerosol emission coefficients were derived and applied in 2002 South America fire season. The inventory estimated by MODIS and GOES FRP measurements were included in Coupled Aerosol-Tracer Transport model coupled to the Brazilian developments on the Regional Atmospheric Modeling System (CATT-BRAMS) and evaluated with ground truth collected in Large Scale Biosphere–Atmosphere Smoke, Aerosols, Clouds, rainfall, and Climate (SMOCC) and Radiation, Cloud, and Climate Interactions (RaCCI). Although the linear regression showed that GOES FRP overestimates MODIS FRP observations, the use of a common external parameter such as MODIS aerosol optical depth product could minimize the difference between sensors. The relationship between the PM_2.5μm (Particulate Matter with diameter less than 2.5 μm) and CO (Carbon Monoxide) model shows a good agreement with SMOCC/RaCCI data in the general pattern of temporal evolution. The results showed high correlations, with values between 0.80 and 0.95 (significant at 0.5 level by student t test), for the CATT-BRAMS simulations with PM_2.5μm and CO.     

Isotopic evidences for provenance of East Asian Dust

We have systematically collected samples in the possible source regions (the deserts and sandy lands of North China, northeastern past of the Tibetan Plateau, Chinese Loess Plateau and southern part of Mongolia) of the East Asian dust. Based on Nd–Sr isotopic ranges, the source regions can be divided into four isotopic regions: Region A1: the Gurbantunggut Desert in Junggar basin and Hunlun Buir sandy land in northeastern China; Region A2: the Hunshandake sandy land, Horqin sandy land and southern part of Mongolia; Region B: the Taklimakan Desert in Tarim basin, northeastern past of the Tibetan Plateau, Chinese Loess Plateau, Badain Jaran Desert and Tengger Desert in Alashan Plateau; Region C: the Hobq Desert and Mu Us Desert in the Ordos Plateau. Through comparison of Nd–Sr isotopes, it can be inferred that the sediments of the north-central Pacific and dust particles in the Greenland ice cores are mainly derived from Region B. Dusts of East Asian dust storm are derived mostly from Region B also, and less from Region A2. The materials of dust storm at Beijing area in April 2006, originated largely from the Hobq Desert and Mu Us Desert in the Ordos Plateau. The floating dust at Beijing area in April 2006, is the mixing of dust of distant deserts and local dust at Beijing area. Loess of the Chinese Loess Plateau may largely originate from Region B.