Insights into real cotton-textile dyeing wastewater treatment using solar advanced oxidation processes

Different advanced oxidation processes (AOPs) were applied to the treatment of a real cotton-textile dyeing wastewater as a pre-oxidation step to enhance the biodegradability of the recalcitrant compounds, which can be further oxidized using a biological process. Tests were conducted on a lab-scale prototype using artificial solar radiation and at pilot scale with compound parabolic collectors using natural solar radiation. The cotton-textile dyeing wastewater presents a lilac color, with a maximum absorbance peak at 641 nm, alkaline pH (pH?=?8.2), moderate organic content (DOC?=?152 mg C L^?1, COD?=?684 mg O₂ L^?1) and low-moderate biodegradability (40 % after 28 days in Zahn–Wellens test). All the tested processes contributed to an effective decolorization and mineralization, but the most efficient process was the solar-photo-Fenton with an optimum catalyst concentration of 60 mg Fe²⁺ L^?1, leading to 98.5 % decolorization and 85.5 % mineralization after less than 0.1 and 5.8 kJ_UV L^?1, respectively. In order to achieve a final wastewater with a COD below 250 mg O₂ L^?1 (discharge limit into water bodies imposed by the Portuguese Legislation-Portaria no. 423/97 of 25 June 1997), considering the combination of a solar-photo-Fenton reaction with a biological process, the phototreatment energy required is 0.5 kJ_UV L^?1, consuming 7.5 mM hydrogen peroxide, resulting in 58.4 % of mineralization $ \left({t}_{30\mathrm{W}}=3.2\ \min; \overline{T}=30.7\ {}^{\circ}\mathrm{C};\overline{\mathrm{pH}}=2.80;{\overline{\mathrm{UV}}}_{G,n}={13\ \mathrm{W}\ \mathrm{m}}^{-2}\right). $      

Biodegradable chelating agents for industrial,domestic, and agricultural applications—a review

Aminopolycarboxylates, like ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA), are chelating agents widely used in several industrial, agricultural, and domestic applications. However, the fact that they are not biodegradable leads to the presence of considerable amounts in aquatic systems, with serious environmental consequences. The replacement of these compounds by biodegradable alternatives has been the object of study in the last three decades. This paper reviews the most relevant studies towards the use of environmentally friendly chelating agents in a large number of applications: oxidative bleaching, detergents and cleaning compositions, scale prevention and reduction, remediation of soils, agriculture, electroplating, waste treatment, and biocides. Nitrilotriacetic acid (NTA), ethylenediaminedisuccinic acid (EDDS), and iminodisuccinic acid (IDS) are the most commonly suggested to replace the nonbiodegradable chelating agents. Depending on the application, the requirements for metal complexation might differ. Metal chelation ability of the most promising compounds [NTA, EDDS, IDS, methylglycinediacetic acid (MGDA), l-glutamic acid N,N-diacetic acid (GLDA), ethylenediamine-N,N′-diglutaric acid (EDDG), ethylenediamine-N,N′-dimalonic acid (EDDM), 3-hydroxy-2,2-iminodisuccinic acid (HIDS), 2-hydroxyethyliminodiacetic acid (HEIDA), pyridine-2,6-dicarboxylic acid (PDA)] with Fe, Mn, Cu, Pb, Cd, Zn, Ca, and Mg was simulated by computer calculations. The advantages or disadvantages of each compound for the most important applications were discussed.     

The effects of different CCS technological scenarios on EU low-carbon generation mix

Carbon capture and storage technology (CCS), a technology to reduce the emissions in coal and gas power generation plants, will play an important role in the achievement of the European Union emissions reduction objective. In the European Union, energy policies are articulated around three different elements: measures to promote renewable energy technologies, the emissions certificates system and both energy-saving and energy-efficiency policies. The succession of directives and communications from the EU Commission on renewable technology generation share targets and the implementation of the European Emissions Market exemplify the serious EU commitment to a more environmentally friendly future. CCS technologies—together with RES technologies—are thus key to achieve the European emissions reduction target. Although the CCS commercial availability is not guaranteed—due to a slow technological development—some institutions, such as the Institute for Prospective Technological Studies, assume, for 2030 horizon, a quick development of this technology, growing until a maximum participation of an 18 % over the fossil fuels total generation. An eventual non-availability of these technologies in 2030 could increase the cost of this objective in a 70 %. Therefore, the achievement of pollutant emissions reduction targets depends on a correct design of the European generation technologies mix, which should include CCS technologies. Nevertheless, the uncertainty about the final costs and economic risk of these technologies makes a question about their future role to arise. This paper analyses the effects of different variations in the cost and risk of the CCS technologies (scenarios) over the European power technologies mix. The results confirm the need of the availability of these technologies in 2030, beyond the potential costs and risks of both options. The reason lies in the methodological approach of portfolio theory, which allows an analysis from an efficient portfolio point of view.     

Airborne polycyclic aromatic hydrocarbons in a medium-sized city affected by preharvest sugarcane burning and inhalation risk for human health

Polycyclic aromatic hydrocarbons (PAHs) in air were measured in a municipality where sugarcane plantations are extensive, at three sites, one in the city center and two in rural localities. Twenty-four-hour sampling was done using PS1 PUF samplers from Andersen Instruments Inc., at least 1 day per month per site, from June 2009 to October 2009. The chemical analyses were performed by gas chromatography–mass spectrometry (GC/MS) for the 16 most toxic PAHs. The incremental lifetime cancer risk (ILTR) by inhalation was determined by the Monte Carlo method for the urban population using Crystal Ball software. The total concentration of the 16 PAHs at all sites varied from 6.2 to 65.7 ng m^?3, with an average of 25.9 ± 18.2 ng m^?3. The average concentrations per site were 14.1 ± 13.0 ng m^?3 at rural site B, 20.7 ± 11.5 ng m^?3 at rural site A, and 36.1 ± 22.7 ng m^?3 at the central site. The cancer risk for infants, children, and adults was approximately 14%, 25%, and 61% of the total IRLT, respectively. The mean (95% upper probability limit [95% UPL]) values were 1.2 × 10^?7 (2.2 × 10^?7) for infants, 2.2 × 10^?7 (4.1 × 10^?7) for children, and 8.9 × 10^?7 (1.1 × 10^?6) for adults. Although the three most abundant PAHs found were phenanthrene, fluoranthene, and pyrene, the three most important contributions to the incremental risk of cancer came from benzo[a]pyrene, benzo[b]fluoranthene, and naphthalene. Compared with the risks in big cities such as São Paulo, this would be low, but not negligible. Analysis of ratios of PAHs according to the literature showed that vehicle exhaust and biomass burning, including sugarcane burning, seem to be the most important contributors to PAH concentrations in the central area of Araraquara City.

Implications:The growth of biofuel use worldwide, especially ethanol, together with preharvesting burning practice, is cause of concern with regard to possible health effects, due to increased air pollution levels in cities in regions where sugarcane plantation and processing are intensive. This paper shows that the risk of cancer from PAH inhalation in an urban area surrounded by sugarcane agriculture was of the same order of magnitude as the tolerable risk value of 10^?6. As other classical and hazardous pollutants are also present, care should be taken to keep pollution as low as possible to protect human health.     

Acute effects of copper and mercury on the estuarine fish Pomatoschistus microps: Linking biomarkers to behaviour

The main objective of the present study was to investigate possible links between biomarkers and swimming performance in the estuarine fish Pomatoschistus microps acutely exposed to metals (copper and mercury). In independent bioassays, P. microps juveniles were individually exposed for 96 h to sub-lethal concentrations of copper or mercury. At the end of the assays, swimming performance of fish was measured using a device specially developed for epibenthic fish (SPEDE). Furthermore, the following biomarkers were measured: lipid peroxidation (LPO) and the activity of the enzymes acetylcholinesterase (AChE), lactate dehydrogenase (LDH), glutathione S-transferases (GST), 7-ethoxyresorufin-O-deethylase (EROD), superoxide dismutase (SOD), catalase (CAT), glutathione reductase (GR) and glutathione peroxidase (GPx). LC₅₀s of copper and mercury (dissolved throughout metal concentrations) at 96 h were 568 μg L⁻¹ and 62 μg L⁻¹, respectively. Significant and concentration-dependent effects of both metals on swimming resistance and covered distance against water flow were found at concentrations equal or higher than 50 μg L⁻¹ for copper and 3 μg L⁻¹ for mercury (dissolved throughout metal concentrations). These results indicate that SPEDE was efficacious to quantify behavioural alterations in the epibenthic fish P. microps at ecologically relevant concentrations. Significant alterations by both metals on biomarkers were found including: inhibition of AChE and EROD activities, induction of LDH, GST and anti-oxidant enzymes, and increased LPO levels, with LOEC values ranging from 25 to 200 μg L⁻¹ for copper and from 3 to 25 μg L⁻¹ for mercury (dissolved throughout metal concentrations). Furthermore, significant and positive correlations were found between some biomarkers (AChE and EROD) and behavioural parameters, while negative correlations were found for others (LPO, anti-oxidant enzymes and LDH) suggesting that disruption of cholinergic function through AChE inhibition, decreased detoxification capability due to EROD inhibition, additional energetic demands to face chemical stress, and oxidative stress and damage may contribute to decrease the swimming performance of fish. Since a reduced swimming capability of fish may reduce their ability to capture preys, avoid predators, and interfere with social and reproductive behaviour, the exposure of P. microps to copper and/or mercury concentrations similar to those tested here may decrease the fitness of wild populations of this species.     

Intake fraction distributions for benzene from vehicles in the Helsinki metropolitan area

The intake fraction (iF) gives a measure of the portion of a source's emissions that is inhaled by an exposed population over a defined period of time. This study examines spatial and population-based iF distributions of a known human carcinogen, benzene, from a ubiquitous urban source, local vehicular traffic, in the Helsinki Metropolitan Area using three computational methods. The first method uses the EXPAND model (EXPosure to Air pollution, especially to Nitrogen Dioxide and particulate matter), which incorporates spatial and temporal information on population activity patterns as well as urban-scale and street canyon dispersion models to predict spatial population exposure distributions. The second method uses data from the personal monitoring study EXPOLIS (Air Pollution Exposure Distributions of Adult Urban Populations in Europe) to estimate the intake fractions for individuals in the study. The third method, a one-compartment box model provides estimates within an order-of-magnitude or better for non-reactive agents in an urban area. Population intake fractions are higher using the personal monitoring data method (median iF 30 per million, mean iF 39 per million) compared with the spatial model (annual mean iF 10 per million) and the box model (median iF 4 per million, mean iF 7 per million). In particular, this study presents detailed intake fraction distributions on several different levels (spatial, individual, and generic) for the same urban area.     

Effects of Cadmium and Zinc on the feeding behaviour of two freshwater crustaceans: Atyaephyra desmarestii (Decapoda) and Echinogammarus meridionalis (Amphipoda)

Lethal and sublethal effects of Cadmium and Zinc on two freshwater crustaceans were investigated. The 96-h LC50 for Cadmium and Zinc were 42.20 microg l(-1) and 5.43 mg l(-1) for Atyaephyra desmarestii, and 36.17 microg l(-1) and 4.61 mg l(-1) for Echinogammarus meridionalis, respectively. An increase in metal concentrations at sublethal levels resulted in significant reductions of the feeding rate of both species. The LOECs in the chronic feeding assays for Zinc were 1.29 mg l(-1) for A. desmarestii and 0.4 mg l(-1) for E. meridionalis. For Cadmium the LOEC was 6.53 microgl(-1) for both species. The results suggest the potential use of these two crustacean species as test organisms in ecotoxicological tests. Feeding assays appear to be a rapid, cheap and effective tool to be used in biomonitoring studies of Portuguese freshwaters.     

Water demand of central pivot-irrigated areas in Bahia,Brazil: management of water resources applied to sustainable production

When performed without technical criteria, the rapid expansion of irrigated agricultural frontiers can result in overexploitation of water, causing worrying impacts on the balance of agroecosystems. This study proposes a model applied to the state of Bahia, to estimate the water demand of areas irrigated by a central pivot, in order to contribute to information that will subsidize the inspection and planning of water resources in the promotion of sustainable agriculture. The irrigated areas were identified and measured by photointerpretation using orbital images from the Landsat-8 satellite. With a historical series of data, the reference evapotranspiration was calculated and monthly water balance was elaborated. The data obtained were spatialized by kriging, and with punctual values of water deficit (mm), the water demand of the irrigated perimeter of the equipment was estimated. The results were described considering strategic planning units, proposed from municipalities, hydrographic basins and biomes. A total of 4075 pivots were quantified, covering an irrigated area of 265,896.30 ha and with an average annual consumption of 1,333,473,208.02 m³ of water. Areas of high demand were identified, especially in the western region of Bahia, which includes the hydrographic basin of the São Francisco River and the Cerrado biome, concentrating 80.85% and 75.47% of the state water demand for pivots, respectively. Considering possible points of water vulnerability and continuity of this expansion, the results provide the primary information needed to encourage the adoption of public policies aimed at the management of water resources. The study method proposes guidelines that condition the application in any region of interest in the world.

Graphical abstract