Pollution levels and characteristics of phthalate esters in indoor air of offices

The pollution status and characteristics of PAEs (phthalate esters) were investigated in indoor air of offices, and PAEs of both gas-phase and particulate-phase were detected in all the samples. The concentration (sum of the gas phase and the particulate phase) was 4748.24 ng/m³, ranging between 3070.09 and 6700.14 ng/m³. Diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate were the most abundant compounds, together accounting for 70% of the Σ6PAEs. Dividing the particulate-phase PAEs into four size ranges (<2.5, 2.5-5, 5-10, >10 μm), the result indicated that PAEs in PM_2.5 were the most abundant, with the proportion of 72.64%. In addition, the PAE concentration in PM_2.5 correlated significantly with the total particulate-phase PAEs (R² = 0.85). Thus, the amount of PAEs in PM_2.5 can be estimated from the total amount of particulate-phase PAEs using this proportion. In a comparison between the offices and a newly decorated study room, it was found that pollution characteristics were similar between these two places. Thus, it is implied that the PAE concentration decreased by 50% 2 yr after decorating.     

Mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor

In this study, the mercury adsorption characteristics of HBr-modified fly ash in an entrained-flow reactor were investigated through thermal decomposition methods. The results show that the mercury adsorption performance of the HBr-modified fly ash was enhanced significantly. The mercury species adsorbed by unmodified fly ash were HgCl₂, HgS and HgO. The mercury adsorbed by HBr-modified fly ash, in the entrained-flow reactor, existed in two forms, HgBr₂ and HgO, and the HBr was the dominant factor promoting oxidation of elemental mercury in the entrained-flow reactor. In the current study, the concentration of HgBr₂ and HgO in ash from the fine ash vessel was 4.6 times greater than for ash from the coarse ash vessel. The fine ash had better mercury adsorption performance than coarse ash, which is most likely due to the higher specific surface area and longer residence time.     

Pollution levels and characteristics of phthalate esters in indoor air of offices

The pollution status and characteristics of PAEs(phthalate esters) were investigated in indoor air of offices, and PAEs of both gas-phase and particulate-phase were detected in all the samples. The concentration(sum of the gas phase and the particulate phase) was4748.24 ng/m3, ranging between 3070.09 and 6700.14 ng/m3. Diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate were the most abundant compounds, together accounting for 70% of the ∑ 6PAEs. Dividing the particulate-phase PAEs into four size ranges( 2.5, 2.5–5, 5–10, 10 μm), the result indicated that PAEs in PM2.5were the most abundant,with the proportion of 72.64%. In addition, the PAE concentration in PM2.5correlated significantly with the total particulate-phase PAEs(R2= 0.85). Thus, the amount of PAEs in PM2.5can be estimated from the total amount of particulate-phase PAEs using this proportion. In a comparison between the offices and a newly decorated study room, it was found that pollution characteristics were similar between these two places. Thus, it is implied that the PAE concentration decreased by 50% 2 yr after decorating.     

Pollution levels and characteristics of phthalate esters in indoor air in hospitals

The concentrations of phthalate esters(PAEs) in Chinese hospitals were investigated by simultaneously determining concentrations of gas- and particle-phase PAEs. PAEs were detected in two third-class first-grade hospitals, two second-class first-grade hospitals, and a community health service center. Hospital drugstores had the highest concentration(24.19 μg/m3), which was 1.54 times that of newly decorated houses. The second highest concentration was found in the transfusion rooms, averaging 21.89 μg/m3; this was followed by the concentrations of PAEs in the nurse's workstations, the wards, and the doctor's offices, with mean concentrations of 20.66, 20.0, and 16.92 μg/m3, respectively. The lowest concentrations were found in the hallways(16.30 μg/m3). Of the six different kinds of PAEs found, major pollutants included diethyl phthalates, dibutyl phthalates, butylbenzyl phthalates and di(2-ethylhexyl) phthalates, comprising more than 80% of all PAEs present.Meanwhile, a comparison between different wards showed that PAE concentrations in the maternity wards were 1.63 times higher than in the main wards. Based on known health hazards, our results suggest that the PAEs seriously influence the health of the pregnant women and babies; therefore, it is of great importance to take the phthalate concentrations in hospitals into consideration. In addition, hospital indoor air was more seriously contaminated than the air of newly decorated houses.     

超高速瞬态测试系统软硬件构架设计研究

目的研究采样频率为2~10 MHz的64通道超高速同步瞬态测试系统的设计技术,实现两类典型超高速瞬态测试系统的硬件架构设计与软件架构设计。方法一类采用PXI-Express高带宽总线和高速RAID磁盘阵列架构构建持续流盘存储的连续高速测试系统,另一类是采用大容量板载数据缓存和PXI总线事后下载传输数据的架构构造高速测试系统。在高性能测试软件设计方面,主要应用生产者/消费者结构与有限状态机相结合的软件架构进行高性能测试系统软件设计。结果目前64通道下基于持续流盘架构的测试系统受数据记录的速度限制系统最高采样频率仅达2.5 MHz,而基于板载缓存数据与PXI总线事后下载数据架构的测试系统最高采样频率可达10 MHz,测试时长可达5 s。结论当前两类架构的测试系统均可满足超高速瞬态测试需求,设计时需根据需求的最高采样频率决定使用的架构形式。     

水稻秸秆经漆酶预处理后产沼气研究

利用秸秆产沼气是秸秆无害化处理解决环境污染问题的可行手段.本研究针对秸秆特殊结构而导致产沼气少、启动慢、利用率低等问题,采用自培养漆酶预处理水稻秸秆,提高了秸秆产气率及利用率.通过研究发现,当漆酶添加量为40 mL、发酵温度为35℃、预处理7d的条件下,秸秆的产气量最高;同时发现,金属离子的添加对沼气产量有很大影响,其中Cu2添加后产气量提高最多.另外,研究发现预处理天数为24 d的秸秆木质素纤维素降解率最高.     

密封充氢环境条件下固态电化学氢气传感器效应试验研究

目的研究密闭充氢环境下固态电化学氢气传感器效应。方法设计能模拟低氧、低氢和压力变化的密闭充氢环境,并在此环境中进行一系列氢气传感器效应试验,分析、评定试验数据。结果得到了不同环境下氢气、氧气浓度随时间变化的规律,提出固态电化学氢气传感器的有效工作环境,并预测了其在不同贮存环境下的工作寿命。结论密闭充氢环境内压力和温度的变化对固态电化学氢气传感器影响较大,湿度影响较小,注气检定合格的氢气传感器,在密封容器内扩散式检定,不合格率高,检定数据误差大于±5%FS。     

城市大气污染治理方法研究——城市新风系统

城市大气污染治理研究多年来未见突破,为了解决城市大气污染给人们生活带来的危害,利用提高生态修复主体利用率的方法,研究出一种新的城市大气污染治理方法——“城市新风系统”,这种方法理论上可以快速有效改善城市区域内大气环境.该研究以南京为例进行模拟计算,并建立了理论模型的雏形.理论模型预期可在数周内改善城市大气环境,并通过污染与新风总量的科学控制实现范围内的全优环境,这是一个具有可复制性,并有极强的推广意义的方法.     

“污泥+生物质”混合厌氧消化分类管理研究

污泥单独厌氧消化困难,产气量低,能量回收价值低.但“污泥+生物质”混合厌氧消化能够改善物料间的营养平衡,运行更平稳,既有效处理污泥,又能够提高甲烷产气量,更适合生产实际,符合行业发展趋势.分析了安阳市四家污水处理厂脱水污泥的重金属含量,依据土地利用限值标准,结合生产实际,把安阳市四个污水处理厂脱水污泥分类,分类混合厌氧消化处理后分类土地利用,既提高了污泥的土地利用,更强化了污泥土地利用的重金属管理.     

广州地区孕妇羊水中PCBs暴露水平初步研究

随机采集广州地区非职业PCBs(polychlorinated biphenyls,多氯联苯)暴露单胎孕妇分娩时羊水,分析羊水中PCBs浓度水平;结合孕妇临床资料(年龄、孕周、身体质量指数(body mass index,BMI))以及孕妇居住环境信息等,阐明了广州地区非职业暴露孕妇羊水PCBs蓄积的影响因素。结果表明,∑33PCBs浓度为15.91-324.38 ng·g-1,平均值为114.34±83.52 ng·g-1,中值为84.8 5ng·g-1;其中十氯含量最低,平均浓度为2.66±3.46 ng·g-1,中值为1.47 ng·g-1;六氯PCBs含量最高,平均浓度为28.79±33.84 ng·g-1,中值为17.48 ng·g-1。样本中有31种PCBs同分异构体在孕妇羊水中检出,分别为PCB 8、28、30、49、52、70、74、77、82、87、99、101、105、114、118、126、128、138、153、156、158、166、169、170、179、180、183、187、189、198和209;羊水主要的PCBs暴露以五氯PCBs、六氯PCBs和七氯PCBs为主,主要的同分异构体为PCB 138(4.73%)、179(4.15%)、153(3.92%)、183(3.89%)、166(3.77%)、187(3.74%)以及180(3.67%);暴露水平与美国、西班牙、加拿大等地区相比属于严重水平。统计结果显示,年龄、身体质量指数和孕周与PCBs蓄积有显著性正相关关系;工业区居住的孕妇相与非工业区居住孕妇相比,上述统计结果更为显著。