Carbon disulfide at a Chinese viscose factory external and internal exposure assessment

This article presents the results of carbon disulfide exposure measurements in a Chinese viscose rayon factory. The objectives of the study were to identify the external exposure levels at a large factory and to investigate the 2-thiothiazolidine-4-carboxylic acid (TTCA) concentrations in the urine of the subjects who were exposed to carbon disulfide in the working place atmosphere. The metabolism of carbon disulfide in the exposed subjects was also studied in order to demonstrate the best points in time for the internal exposure sampling. The measurement of the amount of personal exposure to carbon disulfide in the air of the workplace was performed by GC-FPD; the presence of TTCA in the workers urine was analyzed by use of a modified HPLC method. The kinetics of TTCA excretion was studied by analyses at different time-points both during and after exposure to carbon disulfide in the subjects. A total of 155 personal samples were obtained. The carbon disulfide concentration in the staple viscose hall was 13.72 +/- 1.12 mg m-3 in terms of the geometric mean +/- geometric standard deviation, and was 20.05 +/- 1.33 mg m-3 in the filament spinning hall. The TTCA values in the subjects who worked in the staple spinning hall were 1.18 +/- 0.43 mg g-1 creatinine and 1.07 +/- 0.38 mg g-1 creatinine for subjects working in the filament spinning hall. The best time for TTCA sampling is at the end of the working shift, the TTCA excretion was stable for a period of 4-12 h after exposure of the subjects to the carbon disulfide. It might be that the Chinese have different anthropometric characteristics; a sampling bias may therefore appear among different races.     

MR imaging of the fetal musculoskeletal system

Magnetic resonance imaging (MRI) appears to be increasingly used, in addition to standard ultrasonography for the diagnosis of abnormalities in utero. Previous studies have recently drawn attention to the technical refinement of MRI to visualize the fetal bones and muscles. Beyond commonly used T2-weighted MRI, echoplanar, thick-slab T2-weighted and dynamic sequences, and three-dimensional MRI techniques, are about to provide new imaging insights into the normal and the pathological musculoskeletal system of the fetus. This review emphasizes the potential significance of MRI in the visualization of the fetal musculoskeletal system. © 2012 John Wiley & Sons, Ltd.     

Interspecific and intraspecific identification of Dendrobium based on the psbAtrnH intergenic region sequences and the 5S rRNA gene spacer sequences北大核心CSCD

This research aimed to investigate the interspecific and intraspecific identification of Dendrobium by using the multi-locus method so as to provide a molecular basis for Dendrobium identification through the combination of chloroplast psbA-trnH intergenic region sequences and ribosome 5S rRNA gene spacer sequences. PCR direct sequencing was applied to detect the chloroplast psbA-trnH intergenic region sequences as well as the ribosome 5S rRNA gene spacer sequences of 12 Dendrobium species, while the psbA-trnH intergenic region sequences of Dendrobium denneanum dq-2 variety and dq- 5line were cloned and sequenced for single nucleotide polymorphism (SNP) analyzing. The sequences were analyzed by the software Sequencher4.14, Bioedit7.0, MEGA5.2 and Dansp5.0; the interspecific and intraspecific Kimara-2-Parameter(K2P) distances were also calculated. The phylogenetic tree (using Neighbor joining method) was constructed with Bulbophyllum odoratissimum and Bletilla striata as outgroup. The results showed an average length of chloroplast psbA-trnH gene sequences in Dendrobium as 742.3 bp, with 72 variable sites, including 33 information sites; the average length of the ribosome 5S rRNA gene spacer sequences in Dendrobium was 336.4 bp, with 213 variable sites including 139 information sites. Using psbAtrnH intergenic region sequences in combination with ribosome 5S rRNA gene spacer sequences can not only identify D. denneanum, D. hancockil, D. thysiflorum, D. devonianum, D. moniliforme, D. chrysotoxum, D. officinale, D. heterocarpum and D. nobile, but also differentiate D. officinale from different geographical populations, and distinguish the dq-2 variety and dq 5line with SNP in the multi locus of D. denneanum.     

Ozone concentrations, flux and potential effect on yield during wheat growth in the Northwest-Shandong Plain of China

Ozone (O₃) concentration and flux (F_o) were measured using the eddy covariance technique over a wheat field in the Northwest-Shandong Plain of China. The O₃-induced wheat yield loss was estimated by utilizing O₃ exposure-response models. The results showed that: (1) During the growing season (7 March to 7 June, 2012), the minimum (16.1 ppbV) and maximum (53.3 ppbV) mean O₃ concentrations occurred at approximately 6:30 and 16:00, respectively. The mean and maximum of all measured O₃ concentrations were 31.3 and 128.4 ppbV, respectively. The variation of O₃ concentration was mainly affected by solar radiation and temperature. (2) The mean diurnal variation of deposition velocity (V_d) can be divided into four phases, and the maximum occurred at noon (12:00). Averaged V_d during daytime (6:00–18:00) and nighttime (18:00–6:00) were 0.42 and 0.14 cm/sec, respectively. The maximum of measured V_d was about 1.5 cm/sec. The magnitude of V_d was influenced by the wheat growing stage, and its variation was significantly correlated with both global radiation and friction velocity. (3) The maximum mean F_o appeared at 14:00, and the maximum measured F_o was − 33.5 nmol/(m²·sec). Averaged F_o during daytime and nighttime were − 6.9 and − 1.5 nmol/(m²·sec), respectively. (4) Using O₃ exposure-response functions obtained from the USA, Europe, and China, the O₃-induced wheat yield reduction in the district was estimated as 12.9% on average (5.5%–23.3%). Large uncertainties were related to the statistical methods and environmental conditions involved in deriving the exposure-response functions.     

Consumption of rice and fish in an electronic waste recycling area contributes significantly to total daily intake of mercury

<正>Mercury is a global pollutant due to its widespread use,emission,and long-range transport(Blum,2013;Pacyna et al.,2010).It is considered a priority pollutant due to its neurological toxicity,persistence,and bioaccumulation(Pacyna et al.,2010;Sharma et al.,2015).Mercury pollution can occur when products that contain mercury are improperly disposed of and mercury is released into the air,water,and soil(Zhang and Wong,2007).An estimated 22%of the annual world usage of mercury is in electrical equipment such as batteries,thermometers,and discharge lamps,and electronic devices such as monitors and     

Cloning and expression analysis of geosmin synthase gene from Aphanizomenon gracile北大核心CSCD

Geosmin is a secondary metabolite responsible for earthy odors. The occurrence of geosmin has great impact on the quality of water environment. The gene essential for geosmin biosynthesis have been identified in several species. But little is known about the mechanism of geosmin synthesis in Aphanizomenon gracile. This study attempted to clone the gene involved in geosmin biosynthesis of Aphanizomenon gracile a nd a nalyze t he geosmin production u nder d ifferent e nvironments. T he high-efficiency thermal asymmetric interlaced PCR (hiTAIL-PCR) was used to amplify the full-length of geosmin synthase gene from Aphanizomenon gracile (WH-1). Real time PCR (RT-PCR) was applied to quantify the geosmin production in different light and temperature. As a result, geo, a geosmin synthase gene from Aphanizomenon gracile (WH-1) was cloned by hiTAIL-PCR. The full-length open reading frame (ORF) of geo was 2 262 bp, coding for a protein of 753 amino acids. Meanwhile, WH-1 was treated with different environment conditions and mRNA expression levels of geo were quantified by RT-PCR. It was found that low temperature (15 °C), high light intensity (35 μmol m-2 s-1) and continuous light illumination were beneficial to the expression of geo. The successful amplification of geosmin synthase gene verified that hiTAIL-PCR is an effective and simple procedure of low cost. The result provides fundamental knowledge on the monitoring and prevention for odorants.     

Magnesium-rich minerals in sediment and suspended particulates of South Florida water bodies: implications for turbidity

Fine sediments in shallow water bodies such as Lake Okeechobee are prone to resuspension. Predominantly inorganic "mud" sediment that covers approximately 670 km2 of the lake has been recognized as a persistent source of turbidity. The objective of this study was to determine if mineral components of sediments in Lake Okeechobee and water conveyances of the northern Everglades also occur as suspended sediment and hence constitute a potential abiotic contributor to turbidity. Sediment samples were collected from nine stations within the lake and eight locations north of Water Conservation Area 2A in the Everglades. Water samples were also collected at selected locations. The silt and clay mineralogy of sediment and suspended particles was determined using X-ray diffraction, thermogravimetry, scanning-electron microscopy, energy-dispersive X-ray elemental microanalysis, and high-resolution transmission-electron microscopy. Clay fractions of the lake sediment contained the Mg silicate minerals sepiolite and palygorskite, along with smectite, dolomite, calcite, and kaolinite. Sediment silt fractions were dominated by carbonates and/or quartz, with smaller amounts of Ca phosphates and sepiolite. Mineralogy of the mud sediment was similar to that reported for geologic phosphate deposits. This suggests that the mud sediment might have accumulated by stream transport of minerals from these deposits. Suspended solids and mud-sediment mineralogy were similar, except that smectite was more abundant in suspended solids. Everglade samples also contained Mg-rich minerals. The small size, low density, and fibrous or platy nature of the prevalent mud sediment minerals make them an abiotic, hydrodynamically sensitive source of persistent turbidity in a shallow lake. Mitigation efforts focused exclusively on P-induced biogeochemical processes do not address the origin or effects of these minerals. Ecological management issues such as turbidity control, P retention, geologic P input, and suitability of dredging are related to mud-sediment properties and provenance.