Engaging the community at the Tampakan Copper Project: a community case study in resource development with indigenous people

There is little doubt that one of the most significant challenges facing the mining industry today is how to deal with sociocultural issues, particularly those concerning indigenous groups who are potentially affected by mineral developments. No longer is a project's success dependent on technical and economic considerations alone. Community issues are now an integral component of overall project risk. For the mining industry, therefore, the establishment of positive, strong and transparent relationships with local communities is more than just a moral imperative; it makes good business sense. A case study of WMC's Tampakan Copper Project in the Philippines provides an illustration of how mining companies are developing their capacity to deal with sociocultural concerns.     

Improvements to lawn and garden equipment emissions estimates for Baltimore, Maryland

Lawn and garden equipment are a significant source of emissions of volatile organic compounds (VOCs) and other pollutants in suburban and urban areas. Emission estimates for this source category are typically prepared using default equipment populations and activity data contained in emissions models such as the U.S. Environmental Protection Agency's (EPA) NONROAD model or the California Air Resources Board's (CARB) OFFROAD model. Although such default data may represent national or state averages, these data are unlikely to reflect regional or local differences in equipment usage patterns because of variations in climate, lot sizes, and other variables. To assess potential errors in lawn and garden equipment emission estimates produced by the NONROAD model and to demonstrate methods that can be used by local planning agencies to improve those emission estimates, this study used bottom-up data collection techniques in the Baltimore metropolitan area to develop local equipment population, activity, and temporal data for lawn and garden equipment in the area. Results of this study show that emission estimates of VOCs, particulate matter (PM), carbon monoxide (CO), carbon dioxide (CO2), and nitrogen oxides (NO(x)) for the Baltimore area that are based on local data collected through surveys of residential and commercial lawn and garden equipment users are 24-56% lower than estimates produced using NONROAD default data, largely because of a difference in equipment populations for high-usage commercial applications. Survey-derived emission estimates of PM and VOCs are 24 and 26% lower than NONROAD default estimates, respectively, whereas survey-derived emission estimates for CO, CO2, and NO(x) are more than 40% lower than NONROAD default estimates. In addition, study results show that the temporal allocation factors applied to residential lawn and garden equipment in the NONROAD model underestimated weekend activity levels by 30% compared with survey-derived temporal profiles.     

Sources and factors controlling the disposal of biodegradable municipal solid waste in urban and rural areas of Cyprus

An inventory of sources of biodegradable municipal soil waste (BMSW) was constructed for urban and rural areas in the EU accession region of Cyprus. Composition analysis was performed on source-separated BMSW collected from households in the rural Ergates Community and an urban area within the Agglanjia Municipality. The data were statistically scrutinized to identify the main factors influencing the quantities of BMSW disposed by urban and rural communities in Cyprus. The results were extrapolated to predict the quantities and types of BMSW disposed by the entire communities. Significantly more BMSW was disposed in the urban area compared to the rural community due to lower diversion rates for green waste and the disposal of food waste from commercial sources. The quantity of food waste collected from households was influenced by socio-economic (household size, income, percentage of children) and behavioural (feeding of food waste to domestic animals, consuming processed 'ready' food) factors, whereas garden size, the type of vegetation, the reuse of trimmings and home composting were the main factors controlling the disposal of green waste.     

Accelerated seeded precipitation pre-treatment of municipal wastewater to reduce scaling

Membrane based treatment processes are very effective in removing salt from wastewater, but are hindered by calcium scale deposit formation. This study investigates the feasibility of removing calcium from treated sewage wastewater using accelerated seeded precipitation. The rate of calcium removal was measured during bench scale batch mode seeded precipitation experiments at pH 9.5 using various quantities of calcium carbonate as seed material. The results indicate that accelerated seeded precipitation may be a feasible option for the decrease of calcium in reverse osmosis concentrate streams during the desalination of treated sewage wastewater for irrigation purposes, promising decreased incidence of scaling and the option to control the sodium adsorption ratio and nutritional properties of the desalted water. It was found that accelerated seeded precipitation of calcium from treated sewage wastewater was largely ineffective if carried out without pre-treatment of the wastewater. Evidence was presented that suggests that phosphate may be a major interfering substance for the seeded precipitation of calcium from this type of wastewater. A pH adjustment to 9.5 followed by a 1-h equilibration period was found to be an effective pre-treatment for the removal of interferences. Calcium carbonate seed addition at 10 g l⁻¹ to wastewater that had been pre-treated in this way was found to result in calcium precipitation from supersaturated level at 60 mg l⁻¹ to saturated level at 5 mg l⁻¹. Approximately 90% reduction of the calcium level occurred 5 min after seed addition. A further 10% reduction was achieved 30 min after seed addition.     

Effect of two major N-nitroso hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) metabolites on earthworm reproductive success

Soil and topical tests were employed to investigate the effect of two N-nitroso metabolites of RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) on earthworm reproduction. The lowest observed effect concentration (LOEC) for cocoon production and hatching was 50mg/kg for both hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX) and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX) in soil. MNX and TNX also significantly affected cocoon hatching in soil (p<0.001) and in topical tests (p=0.001). The LOECs for cocoon hatching were 1 and 10mg/kg for MNX and TNX in soil, respectively, and 10mg/L in the topical test. Greater than 100mg/kg MNX and TNX completely inhibited cocoon hatching. In soil, the EC20 values for MNX were 8.7 and 8.8mg/kg for cocoon and juvenile production, respectively, compared to 9.2 and 9.1mg/kg for TNX, respectively. The EC20 values for the total number of cocoon hatchlings were 3.1 and 4.7mg/kg for MNX and TNX, respectively, in soil and 4.5 and 3.1mg/L in the topical test. Both MNX and TNX inhibited cocoon production and hatching, suggesting that they may have a negative affect on soil ecosystems at contaminated sites.     

不同施氮处理下旱作农田土壤CH_4、N_2O气体排放特征研究

依托甘肃农业大学布设在定西市李家堡镇的长期施氮定位实验,对不同施氮农田CH4和N2O气体通量,采用静态箱-气相色谱法进行小麦生育期的连续观测,并对影响通量变化的环境因子同期观测.结果表明:5个施氮处理下(0、52.5、105、157.5、210 kg·hm-2),旱作农田土壤在小麦全生育期内表现为CH4累积通量的汇和N2O累积通量的源;且不施氮处理时,CH4累积吸收通量最大;施氮量为210 kg·hm-2时,土壤CH4的累积吸收通量所受抑制最大,即土壤CH4累积吸收通量随施氮量升高而降低.相反,不施氮处理时,土壤N2O的累积排放通量最小,施氮量为210 kg·hm-2时,土壤N2O的累积排放通量最大,土壤N2O累积排放通量随施氮量的增加而增大.综合分析,施氮量增大会抑制全生育期旱作春小麦田土壤CH4吸收通量,提高土壤N2O的排放通量.因此,合理控制施氮量有利于生育期旱作农田土壤减排.CH4平均吸收通量随土壤温度的升高而降低,随土壤水分的升高而升高;相反,N2O平均排放通量随土壤温度的升高而升高,随土壤水分的升高而降低.5~10 cm层次的土壤温度与CH4平均吸收通量呈极显著线性负相关,与N2O平均排放通量呈显著正相关.5~10 cm层次的土壤水分与CH4平均吸收通量呈极显著线性正相关,与N2O平均排放通量呈显著负相关.     

Inventory of Ocean Monitoring in the Southern California Bight

Monitoring of the ocean environment in southern California, USA, has been conducted by a diverse array of public and private organizations with different motivations, working on a variety of spatial and temporal scales. To create a basis from which to integrate information from these diverse programs, we conducted an inventory of ocean monitoring activities in the Southern California Bight to address the following questions: (1) How much money is being expended annually on marine monitoring programs? (2) Which organizations are conducting the most monitoring? (3) How are resources allocated among the different types of monitoring programs? This inventory focused on programs existing, or those expected to be in existence, for at least 10 years and that were active at any time between 1994 and 1997. For each program identified for inclusion in this study, information was collected on the number of sites, sampling intensity, parameters measured, and methods used. Levels of effort were translated into cost estimates based upon a market survey of local consulting firms. One hundred fourteen marine monitoring programs, conducted by 65 organizations and costing US $31 million annually, were identified. Most of the effort (81 programs, 65% of samples, 70% of costs) was expended by ocean dischargers as part of their compliance with National Pollutant Discharge Elimination System (NPDES) permit requirements. Federal programs (11 programs, 25% of samples, 10% of total expenditures) expended more than state or local government programs. More than one quarter of monitoring expenditures were conducted to measure concentrations and mass of effluent inputs to the ocean. The largest effort expended on receiving water monitoring was for measuring bacteria, followed by sediments, fish/shellfish, water quality, and intertidal habitats. The large level of expenditures by individual agencies has presented opportunities for integrating small, site-specific ocean monitoring programs into regional- and national-scale monitoring and assessment programs.     

The Steubenville Comprehensive Air Monitoring Program (SCAMP): Overview and Statistical Considerations

Abstract

Average concentrations of particulate matter with an aerodynamic diameter less than or equal to 2.5 μm (PM_2.5) in Steubenville, OH, have decreased by more than 10 μg/m³ since the landmark Harvard Six Cities Study¹ associated the city’s elevated PM_2.5 concentrations with adverse health effects in the 1980s. Given the promulgation of a new National Ambient Air Quality Standard (NAAQS) for PM_2.5 in 1997, a current assessment of PM_2.5 in the Steubenville region is warranted. The Steubenville Comprehensive Air Monitoring Program (SCAMP) was conducted from 2000 through 2002 to provide such an assessment. The program included both an outdoor ambient air monitoring component and an indoor and personal air sampling component. This paper, which is the first in a series of four that will present results from the outdoor portion of SCAMP, provides an overview of the outdoor ambient air monitoring program and addresses statistical issues, most notably autocorrelation, that have been overlooked by many PM_2.5 data analyses. The average PM_2.5 concentration measured in Steubenville during SCAMP (18.4 μg/m³) was 3.4g/m³ above the annual PM_2.5 NAAQS. On average, sulfate and organic material accounted for ～31% and 25%, respectively, of the total PM_2.5 mass. Local sources contributed an estimated 4.6 μg/m³ to Steubenville’s mean PM_2.5 concentration. PM_2.5 and each of its major ionic components were significantly correlated in space across all pairs of monitoring sites in the region, suggesting the influence of meteorology and long-range transport on regional PM_2.5 concentrations. Statistically significant autocorrelation was observed among time series of PM_2.5 and component data collected at daily and 1-in-4-day frequencies during SCAMP. Results of spatial analyses that accounted for autocorrelation were generally consistent with findings from previous studies that did not consider autocorrelation; however, these analyses also indicated that failure to account for autocorrelation can lead to incorrect conclusions about statistical significance.