Optical and Chemical Methods of Metal Ash Analysis and Tin Recovery

‘Metal ash’ presents a waste disposal problem in most of the developing countries as the industries employ obsolete technologies. In this paper we describe analysis of tin ash, zinc ash and aluminium ash by means of optical methods, such as X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), electron probe micro analysis (EPMA), scanning electron microscopy (SEM) and chemical methods. The results of tin ash obtained by XRD method matched well with the cassiterite, a naturally occurring mineral of tin. ICP-MS studies reveal the presence of a large number of tracer metals, which may cause pollution by tertiary dispersion and this aspect is discussed. Conversely, the data generated by chemical methods are limited. However, the methods are simple and cost-effective. Then, they can easily be adopted by low-budget industries. Simple and cost-effective process to recover tin from tin ash is described. It is based on heating tin ash with sodium cyanide to about 900°C to separate tin component from the metal ash. The process recovers good quality tin and offers a very high yield. The process can be scaled up to small pilot plant.     

Violence breeds violence: burnout as a mediator between patient violence and nurse violence

The present study examines whether patient-perpetrated violence triggers anger, hatred and other negative emotions that, under certain circumstances, might motivate nurses to behave violently with patients. In doing so, this study considers burnout as a mediator in the patient violence–nurse violence relationship. To test the causal paths, data were collected from 182 nurses working in two government-sector teaching hospitals of Pakistan's Punjab province. Results confirm that patient violence toward nurses leads to nurse violence toward patients through the mediating effect of burnout. The study advises hospitals to provide wellness and stress management programs to nurses who regularly experience events involving patient violence. Hospitals may consider allowing nurses to take short breaks after an encounter with violently behaving patients. In addition, hospitals should conduct empathy-promoting training, emotional intelligence training and ‘lens of the patient’ training programs to sensitize their nursing staff.     

Hand-arm vibration disorder among grass-cutter workers in Malaysia

Introduction. Prolonged exposure to hand-transmitted vibration from grass-cutting machines has been associated with increasing occurrences of symptoms and signs of occupational diseases related to hand–arm vibration syndrome (HAVS). Methods. A cross-sectional study was carried out using an adopted HAVS questionnaire on hand–arm vibration exposure and symptoms distributed to 168 male workers from the grass and turf maintenance industry who use hand-held grass-cutting machines as part of their work. The prevalence ratio and symptom correlation to HAVS between high and low–moderate exposure risk groups were evaluated. Results. There were positive HAVS symptoms relationships between the low–moderate exposure group and the high exposure group among hand-held grass-cutting workers. The prevalence ratio was considered high because there were indicators that fingers turned white and felt numb, 3.63, 95% CI [1.41, 9.39] and 4.24, 95% CI [2.18, 8.27], respectively. Less than 14.3% of workers stated that they were aware of the occupational hand–arm vibration, and it seemed to be related to the finger blanching and numbness. Conclusion. The results suggest that HAVS is under-diagnosed in Malaysia, especially in the agricultural sectors. More information related to safety and health awareness programmes for HAVS exposure is required among hand-held grass-cutting workers.     

Polymeric Nanocomposite-Based Herbicide of Carboxymethyl Cellulose Coated-Zinc/Aluminium Layered Double Hydroxide-Quinclorac: A Controlled Release Purpose for Agrochemicals

Journal of Polymers and the Environment - In this work, the use of carboxymethyl cellulose (CMC) is highlighted in enhancing the controlled release behaviour of zinc/aluminium layered double...     

Use of waste gypsum to replace natural gypsum as set retarders in portland cement

The present study is focused on clarifying the influence of waste gypsum (WG) in replacing natural gypsum (NG) in the production of ordinary Portland cement (OPC). WG taken from slip casting moulds in a ceramic factory was formed from the hydration of plaster of paris. Clinker and 3–5 wt% of WG was ground in a laboratory ball mill to produce cement waste gypsum (CMWG). The same procedure was repeated with NG to substitute WG to prepare cement natural gypsum (CMNG). The properties of NG and WG were investigated via X-ray Diffraction (XRD), X-ray fluorescence (XRF) and differential scanning calorimetry (DSC)/thermogravimetric (TG) to evaluate the properties of CMNG and CMWG. The mechanical properties of cement were tested in terms of setting time, flexural and compressive strength. The XRD result of NG revealed the presence of dihydrate while WG contained dihydrate and hemihydrate. The content of dihydrate and hemihydrates were obtained via DSC/TG, and the results showed that WG and NG contained 12.45% and 1.61% of hemihydrate, respectively. Furthermore, CMWG was found to set faster than CMNG, an average of 15.29% and 13.67% faster for the initial and final setting times, respectively. This was due to the presence of hemihydrate in WG. However, the values obtained for flexural and compressive strength were relatively the same for CMNG and CMWG. Therefore, this result provides evidence that WG can be used as an alternative material to NG in the production of OPC.     

Assessment of organochlorine pesticides and plasticisers in the Selangor River basin and possible pollution sources

A study on the quality of water abstracted for potable use was conducted in the Selangor River basin from November 2008 to July 2009. Seven sampling sites representing the intake points of water treatment plants in the basin were selected to determine the occurrence and level of 15 organochlorine pesticides (OCPs), six phthalate esters (PAEs) and bisphenol A (BPA). Results indicated OCPs were still detected regularly in 66.1 % of the samples with the Σ₁₅OCPs ranging from 0.6–25.2 ng/L. The first data on PAEs contamination in the basin revealed Σ₆PAEs concentrations were between 39.0 and 1,096.6 ng/L with a median concentration of 186.0 ng/L while BPA concentration ranged from <1.2 to 120.0 ng/L. Although di-n-butyl phthalate was detected in all the samples, concentrations of di-ethyl(hexyl)phthalate were higher. Sampling sites located downstream recorded the highest concentrations, together with samples collected during the dry season. Comparison of the detected contaminants with the Department of Environment Water Quality Index (DOE-WQI) showed some agreement between the concentration and the current classification of stream water. While the results suggest that the sites were only slightly polluted and suitable to be used as drinking water source, its presence is cause for concern especially to the fragile firefly “Pteroptyx tener” ecosystem located further downstream.     

Paper electrophoretic separations of some common pesticides : Determination of monocrotophos,rogor and malathion in soil samples

Abstract

Paper electrophoretic movements of a number of pesticides belonging to organophosphorus, organochlorine and pyethroid groups in various acid background electrolytes have been studied. The effect of pH and pKa of the acids on the movement of these pesticides have also been studied. It has been observed that the movement of most of the pesticides is enhanced with increase in the degree of ionisation of the acids (pKa) studied as background electrolytes. The movement also increases with increase in the pH of acids. On the basis of differential movement of pesticides towards cathode and anode, a number of separations have been achieved from binary mixtures. Monocrotophos, rogor and malathion have been determined quantitatively (28.6 ‐ 29.2 μg) in alcoholic extracts of soil samples.     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.     

Institutional isomorphism and environmental sustainability: a new framework from the Shariah perspective

Environment, Development and Sustainability - Islam emphasizes the importance of environmental care, as prescribed in its primary sources of Shariah, the Quran and the authenticated actions and...     

Optimization of co-digestion of various industrial sludges for biogas production and sludge treatment: Methane production potential experiments and modeling

Optimal biogas production and sludge treatment were studied by co-digestion experiments and modeling using five different wastewater sludges generated from paper, chemical, petrochemical, automobile, and food processing industries situated in Ulsan Industrial Complex, Ulsan, South Korea. The biomethane production potential test was conducted in simplex-centroid mixture design, fitted to regression equation, and some optimal co-digestion scenarios were given by combined desirability function based multi-objective optimization technique for both methane yield and the quantity of sludge digested. The co-digestion model incorporating main and interaction effects among sludges were utilized to predict the maximum possible methane yield. The optimization routine for methane production with different industrial sludges in batches were repeated with the left-over sludge of earlier cycle, till all sludges have been completely treated. Among the possible scenarios, a maximum methane yield of 1161.53 m³ is anticipated in three batches followed by 1130.33 m³ and 1045.65 m³ in five and two batches, respectively. This study shows a scientific approach to find a practical solution to utilize diverse industrial sludges in both treatment and biogas production perspectives.