Sizing and Costing of fabric Filters Part II: Costing Considerations

This is the second of a two-part article that reviews baghouse filtration theory, presents size estimating methods, and gives costing procedures for a variety of baghouse types and sizes. Part I of the article discussed theory and sizing; this part presents costing. Information is given for estimating total capital investment including separate costs for the bare baghouse (five types), bags, and, where needed, cages and Venturis. Factors are given for installation and for indirect costs. Direct and indirect annual costs are discussed. An example problem is given. The material in this article is taken primarily from the EAB Control Cost Manual.     

Extending Fabric Filter Capabilities

It has been amply demonstrated that there are reasons for improving the collection of fine participates. Some areas of research and development which may prove fruitful in extending fabric filter capabilities have been suggested.     

A Sampler for Measuring Deposited Fine Sediments in Streams1

Turner, Andy W., Jeff J. Hillis, and Charles F. Rabeni, 2012. A Sampler for Measuring Deposited Fine Sediments in Streams. Journal of the American Water Resources Association (JAWRA) 48(2): 366‐378. DOI: 10.1111/j.1752‐1688.2011.00618.x Abstract: Improvements and standardization of methodologies to quickly and accurately quantify deposited sediment in streams will allow advances in our understanding of biological effects of sedimentation. Most methods used to evaluate streambed conditions as part of biological monitoring or assessment programs are selected for ease of use, but can be subjective, inappropriate, and often of unknown accuracy. We developed a portable, light‐weight device to quantify deposited unconsolidated sediment (particles <2 mm) in wadeable streams. This deposited sediment sampler is a hand‐held unit that circumscribes an area of the streambed and through suction creates a force that suspends unconsolidated materials into a collector. Laboratory evaluations determined the efficiency (percent of available deposited sediment recovered) of the sampler to collect different sizes and concentrations of deposited sediment under differing streambed conditions, which allowed appropriate correction factors to be applied to each of four categories of streambed particle size. Field trials comparing our sampler to other methods commonly used by many state and federal agencies showed high comparability. The sampler can be constructed in just a few hours from inexpensive, easily obtained materials.     

Leaching of Cu and Zn from discarded boat paint particles into tap water and rain water

We studied the leaching of copper and zinc from particles of discarded boat paint added to tap water (pH 7.3) and rain water (pH = 4.7), simulating conditions encountered during the hosing or runoff of antifouling waste. Leaching rates appeared to be diffusion-controlled and were greater in rain water than in tap water and were greater for Zn than for Cu. After a period of 120 h, between about 0.5% and 3% of total Cu and 5-30% of total Zn had been released to the aqueous phase. These observations suggest that Cu and Zn mobilised from fine antifouling particulates during washdown or rainfall events may be important contaminants of runoff and soils in the vicinity of boat repair facilities.     

Leaching of zinc from tire wear particles under simulated estuarine conditions

Tire wear particles (TWP) abraded from end-of-life passenger car tires have been added at a concentration of 1 g L⁻¹ to river water, sea water and mixtures thereof in order to examine the chemical controls on the leaching of Zn from the rubber matrix. Results of time-dependent experiments conducted over a period of 5 days were consistent with a diffusion controlled leaching mechanism with rate constants of about 0.04 mg L⁻¹ h^−1/2 in river water and between about 0.02 and 0.03 mg L⁻¹ h^−1/2 in sea water. Additional experiments revealed a reduction in Zn dissolution with both increasing salinity and pH and enhancement of leaching in the presence of fluorescent light compared with dark conditions. In corresponding experiments conducted in the presence of a fixed quantity (0.8 g L⁻¹) of clean, fractionated estuarine sediment, aqueous Zn concentrations were reduced by at least an order of magnitude. Increasing the quantity of sediment resulted in a progressive reduction in Zn concentration until an apparent equilibrium was achieved, with partition coefficients defining the sediment-water distribution of Zn of about 550 mL g⁻¹ and 270 mL g⁻¹ in river water and sea water, respectively. Results are interpreted in terms of the dissolution of ZnO and other residual complexes from the matrix and the subsequent, rapid adsorption of Zn²⁺ ions to coexistent estuarine sediment. The findings of the study are discussed in terms of their implications for the transport, fate and effects of TWP Zn in aquatic environments that are likely to receive urban runoff.     

One century sedimentary records of polycyclic aromatic hydrocarbons, mercury and trace elements in the Qinghai Lake, Tibetan Plateau

Sediments from a remote lake of northeastern Tibetan Plateau were analyzed for polycyclic aromatic hydrocarbons (PAHs) and trace metals. USEPA priority PAHs, ranged from 11 in 1860 to 279 ng g⁻¹ in 2002, while, the deposition fluxes were in the range of 0.2-11.4 ng cm⁻² yr⁻¹. Similarly, from 1860 to 2002, an increased trend of Hg flux was observed (0.5-3.2 ng cm⁻² yr⁻¹). Remarkable increase of PAHs and Hg concentration began from 1970, nearly the same period of the “Reform and Open” Policy had been embarked (1978) in China. Good correlations were found between concentrations of Pb, Zn, Cd, As, Hg, and PAHs, which suggested the sources of these chemicals in the sediment is analogous, likely from anthroprogenic sources. Based on isomer ratios, PAHs in core were dominantly from the incomplete combustion of coal. Owing to the proximity to dust source area (Qaidam Basin) and the close association between PAHs, Hg, Pb, and particle matters, atmospheric dust-transport and deposition might be the main pathways that pollutants enter into Qinghai Lake.     

Transport of atmospheric fine particulate matter: part 1--findings from recent field programs on the extent of regional transport within North America

Air quality field data, collected as part of the fine particulate matter Supersites program and other field measurements programs, have been used to assess the role of aerosol transport, over length scales of approximately 100-1000 km, on fine particulate matter concentrations. Assessment of data from New York, NY; Baltimore, MD; Pittsburgh, PA; Atlanta, GA; Houston, TX; St. Louis, MO; and Fresno, CA, indicates that in virtually all of the regions, transport of aerosol over distances of 100-1000 km has a significant impact on urban particulate matter concentrations and a dominant role in determining rural particulate matter concentrations, though the nature of the regional contributions differs from region to region. This assessment is generally consistent with previous conceptual models of fine particulate matter formation and accumulation in these regions. The nature of the transported aerosol is largely sulfate in Eastern and Midwestern cities and nitrate in the Central Valley of California. In addition to physical transport of aerosol over distances of 100-1000 km, regional transport of aerosol precursors may lead to conditions conducive to large-scale nucleation events. Regional nucleation events have been reported in the East, Midwest, and in California. The events occurred in the morning soon after surface layers coupled with layers aloft, and the events generate ultrafine particles. In some cases, these nucleation events have been correlated with availability of sulfur dioxide and, therefore, may be sulfate formation events.     

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (PCBs) in the serum of US Air Force veterans in 2002

We measured levels of PCDDs, PCDFs, non-ortho, and mono-ortho substituted PCBs in 106 US Air Force Vietnam veterans, participants of the Air Force Health Study (AFHS) who attended the final medical examination in 2002. Twelve veterans were Ranch Hands involved in aerial spraying of herbicides in Vietnam (1962-1971), and 94 were Comparisons who flew transport missions in Southeast Asia (SEA) during the same time period. These veterans had no previous 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) measurement because they had not attended any of the previous AFHS examinations, or their previous measurements were missing or not valid. The mean TCDD levels in 2002 were 1.7 pg/g lipid in Comparisons and 5.5 pg/g lipid in Ranch Hands. The mean PCDD toxic equivalent - TEQ (1997) in Comparisons was 12.6 pg/g lipid, 5.4 pg/g lipid for PCDFs, 5.2 pg/g lipid for non-ortho PCBs, and 9.4 pg/g lipid for mono-ortho PCBs, with a total mean TEQ (1997) of 32.6 pg/g lipid. Corresponding mean TEQs in Ranch Hands were 15.5 pg/g lipid for PCDDs, 4.6 pg/g lipid for PCDFs, 2.2 pg/g lipid for non-ortho PCBs, and 9.3 pg/g lipid for mono-ortho PCBs, yielding the total mean TEQ (1997) of 31.6pg/g lipid. Using the re-evaluated 2005 WHO TEFs, the total mean TEQs (2005) decreased by about 28% in both Comparisons and Ranch Hands, to 23.6 pg/g lipid and 22.8 pg/g lipid, respectively. This was mainly due to changes of TEFs for the group of mono-ortho PCBs, which decreased the mono-ortho PCBs TEQs by almost 90% in both Ranch Hands and Comparisons.     

Mechanistic Virtual Modeling: Coupling a Plant Simulation Model with a Three-dimensional Plant Architecture Component

The aim of this research is to integrate plant architectural modeling or “visualization modeling” and “mechanistic” or physiologically based modeling to describe how a real plant functions using a virtual crop. Virtual crops are life-like computer representations of crops based on individual plants and including the representation of the substrate on which the plants grow. The integration of a three-dimensional expression and the mechanistic model of plant development and growth requires the knowledge of the position of the organs along the different plant axes (the topology), their sizes, their forms, and their spatial orientation. The plant simulation model simulates the topology and organ weight or length. The superposition of spatial position and the topology produces the architecture of the plant. The association between sizes and organs creates what we refer to as the plant morphological model. Both components, the architectural model and the morphology model, are detailed in this paper. Once the integration is complete, the system produces a movie-like animation that shows the plant growing. The integrated model may simulate one or several plants growing simultaneously (in parallel). Visual capabilities make the proposed system very unique as it allows users to judge the results of the simulation the same way a farmer judges the situation of the crops in real life, by visually observing the field.     

Indoor radon levels: Effects of energy-efficiency in homes

The expectation of elevated ²²²Rn levels in modern homes that have low air interchange rates with the outdoor air caused us to survey both solar and conventional homes in northeastern New York State. As a group, homes that are more airtight have three times the ²²²Rn levels of the conventional homes; they have other specific problems that are introduced or exaggerated by modern construction. For example, the highest two levels of radon in the solar homes give doses over 30 years that are known to produce lung cancer in 1% of uranium miners. Summer readings in more than one-half of the cases are different from winter ones by a factor of two or more, so that year-round measurements are necessary for precise dosimetry. The track-etching technique is ideally suited for such measurements. Radon emanation measurements on soils and sand demonstrate a considerable variety of release rates.