Minimising emissions and energy wastage by improved industrial processes and integration of renewable energy

This article provides an introduction to this Special Issue of Journal of Cleaner Production (JCLP), which contains thirteen, carefully selected articles from the 12th Conference, “Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction” – PRES'09. This issue builds upon the multi-year co-operation between the PRES conference planners and the JCLP. The articles cover important subjects of increased efficiency in energy generation and usage and in improvements in industrial process optimisation. The first group of five papers focuses upon recent advances in emissions reduction and the resulting energy penalties. The second group of four papers deals with improving the efficiency and reliability in the utilisation of renewable energy, where hydrogen and biodiesel are the key energy carriers. The final group of three papers focus on process integration challenges of sustainable energy systems and upon the challenges of industrial/societal integration of sustainable energy systems into regional sustainable development planning.     

The influence of artificial sealing on the capillary barrier’s function

Regulations for the sealing of landfill sites require two independent sealing components. To satisfy this requirement, the combined capillary barrier was developed using impermeable sheeting placed between the capillary layer and the capillary block of the traditional capillary barrier. In this study, a numerical model is introduced based on hydraulic characteristics obtained by means of measurements of samples of capillary barrier materials. To make a comparison possible, samples of a laboratory investigated barrier were measured. Two laboratory experiments with a simple and a combined capillary barrier were repeated using the developed numerical model and good agreement between computed and measured results was found. Subsequently, the model was used for investigating the effect of failure of the artificial sheeting on the capillary barrier’s efficiency. The obtained results are presented and discussed.     

Monitoring of agriculture soils in the Czech Republic

In the Czech Republic a complex monitoring of agriculture soils has commenced. This paper describes the approach to establishing monitoring plots. Comparing the results of Systematic Soil Survey and those from the first period of agriculture monitoring demonstrates that a representative set of plots was achieved. Soil properties (physical, chemical, biological and agronomical), atmospheric deposition (some parameters being monthly and some only for the summer and winter season) and selected other influences (application of pesticides, irrigation, etc.) are all monitored. Results for atmospheric deposition in the Czech Republic from the first period and Bavaria [Bayerische Landesanstalt für Bodenkultur und Pflanzenbau, 1992) are also compared. Data are evaluated by a statistical package (Statgrafics) and prepared for future transfer into a suitable GIS.     

Evaluation of oxidation stability of lignite humic substances by DSC induction period measurement

The stability of lignite humic acids and four regenerated humic acids was estimated by employing differential scanning calorimetry. Induction period for the oxidative decomposition of humic matter was calculated from non-isothermal measurements at six different rates of heating. To simulate the gradual evolution history of humic acids, different intensities of oxidation attack by nitric acid on the original lignite was used. Experimental data showed higher stability of natural humic acids in the temperature range where the decomposition step occurred. On the other hand, extrapolation to lower temperatures and calculated kinetic parameters did not correspond to the order observed at higher temperatures. An oscillating trend of calculated parameters of the two proposed parts of stability was observed, which agreed with data concerning regenerated humic acids production. The approach applied in this work represents a rapid and useful method for evaluation of organic matter stability.     

Separation of non-ortho polychlorinated biphenyl congeners on pre-packed carbon tubes. Application to analysis in sewage sludge and soil samples

The analysis of planar (non-ortho) polychlorinated biphenyls (PCB) by HRGC-ECD or HRGC-HRMS requires a fractionation step to avoid the interferences of the bulk of PCB, usually in much higher concentration than the planar ones. In this paper, a new method, based on the fractionation of PCB on SPE commercial tubes pre-packed with Carbopack B, has been developed. After the extract has been applied on the stationary phase, the bulk of PCD are eluted with 15 ml of hexane (fraction I), mono-ortho PCB with 20 ml of hexane/toluene 99:1 (fraction II) and planar PCB with 20 ml of toluene (fraction III) in a station under vacuum. The method has been validated: accuracy (expressed as recovery in %) is >70% and precision (expressed as % RSD) is <20% considering changes of day, analyst and batch of tubes. The method is linear in the range studied. Other advantages are that the method is simple, rapid and it can be easily automated. The application of this separation to the determination of planar PCB in fly-ash extracts from an intercalibration exercise and to sewage sludge, sediment and soil samples has been successful. In addition, this method removes hydrocarbons from the planar PCB fraction and allows its concentration to very small volumes.     

Study of evolution of PCDD/F in sewage sludge-amended soils for land restoration purposes

The evolution of polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) in sewage sludge-amended soils used in the restoration of degraded lands, like quarries, has been studied. Two experiments were performed: one in the lab, under controlled conditions, and another in a quarry. Two different doses of sewage sludge were applied in both experiments (with two types of application in the quarry experiment) and the evolution of the amended soils were compared with that of the respective control soils (without addition of sewage sludge). The samples were analyzed with a previously validated method by HRGC HRMS after the extraction and the necessary clean-up steps. The results reveal that polluted sewage sludge increases PCDD/F concentration in soils and that these compounds are persistent in the matrix after long periods of time.     

Bioremediation of a weathered and a recently oil-contaminated soils from Brazil: a comparison study

The facility with which hydrocarbons can be removed from soils varies inversely with aging of soil samples as a result of weathering. Weathering refers to the result of biological, chemical and physical processes that can affect the type of hydrocarbons that remain in a soil. These processes enhance the sorption of hydrophobic organic contaminants (HOCs) to the soil matrix, decreasing the rate and extent of biodegradation. Additionally, pollutant compounds in high concentrations can more easily affect the microbial population of a recently contaminated soil than in a weathered one, leading to inhibition of the biodegradation process. The present work aimed at comparing the biodegradation efficiencies obtained in a recently oil-contaminated soil (spiked one) from Brazil and an weathered one, contaminated for four years, after the application of bioaugmentation and biostimulation techniques. Both soils were contaminated with 5.4% of total petroleum hydrocarbons (TPHs) and the highest biodegradation efficiency (7.4%) was reached for the weathered contaminated soil. It could be concluded that the low biodegradation efficiencies reached for all conditions tested reflect the treatment difficulty of a weathered soil contaminated with a high crude oil concentration. Moreover, both soils (weathered and recently contaminated) submitted to bioaugmentation and biostimulation techniques presented biodegradation efficiencies approximately twice as higher as the ones without the aforementioned treatment (natural attenuation).     

Azo-dyes photocatalytic degradation in aqueous suspension of TiO2 under solar irradiation

The photodegradation of two common and very stable azo-dyes, i.e. methyl-orange (C₁₄H₁₄N₃SO₃Na) and orange II (C₁₆H₁₁N₂SO₄Na), is reported. The photocatalytic oxidation was carried out in aqueous suspensions of polycrystalline TiO₂ irradiated by sunlight. Compound parabolic collectors, installed at the “Plataforma Solar de Almería” (PSA, Spain) were used as the photoreactors and two identical reacting systems allowed to perform photoreactivity runs for the two dyes at the same time and under the same irradiation conditions. The disappearance of colour and substrates together with the abatement of total organic carbon content was monitored. The main sulfonate-containing intermediates were found to be in lower number in respect to those obtained under artificial irradiation. In particular there were no more evidence of the presence of hydroxylated transients. The dependence of dye photooxidation rate on: (i) substrate concentration; (ii) catalyst amount; and (iii) initial pH was investigated. The influence of the presence of strong oxidant species (H₂O₂, S₂O₈²⁻) and some ions (Cl⁻, SO₄²⁻) on the process was also studied.     

A New Open‐Access HUC‐8 Based Downscaled CMIP‐5 Climate Model Forecast Dataset for the Conterminous United States

Watershed‐scale hydrologic simulation models generally require climate data inputs including precipitation and temperature. These climate inputs can be derived from downscaled global climate simulations which have the potential to drive runoff forecasts at the scale of local watersheds. While a simulation designed to drive a local watershed model would ideally be constructed at an appropriate scale, global climate simulations are, by definition, arbitrarily determined large rectangular spatial grids. This paper addresses the technical challenge of making climate simulation model results readily available in the form of downscaled datasets that can be used for watershed scale models. Specifically, we present the development and deployment of a new Coupled Model Intercomparison Project phase 5 (CMIP5) based database which has been prepared through a scaling and weighted averaging process for use at the level of U.S. Geological Survey (USGS) Hydrologic Unit Code (HUC)‐8 watersheds. The resulting dataset includes 2,106 virtual observation sites (watershed centroids) each with 698 associated time series datasets representing average monthly temperature and precipitation between 1950 and 2099 based on 234 unique climate model simulations. The new dataset is deployed on a HydroServer and distributed using WaterOneFlow web services in the WaterML format. These methods can be adapted for downscaled General Circulation Model (GCM) results for specific drainage areas smaller than HUC‐8. Two example use cases for the dataset also are presented.