Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Comparison of Air Pollutant Emissions from Vaporizing and Air Atomizing Waste Oil Heaters

Information presented in this paper is directed to individuals concerned with emissions from combustion of waste crankcase oil for space heating. Studies were performed to characterize gaseous and particulate emissions and vaporizing pot solid residues resulting from the combustion of waste crankcase oil. Two types of waste oil burners were tested. One was a vaporizing oil burner rated at 35.2 kW (120,000 Btu/h heat input), and the other was an air atomizing oil burner rated at 73.3 kW (250,000 Btu/h heat input). Except for NO_X and SO_X, gaseous emissions were similar to those from conventional distillate oil combustion. NO_X and SO_X emissions were higher due to higher fuel nitrogen and sulfur concentrations. Waste oil from automotive use showed higher inorganic levels than crankcase oil used for truck engine lubrication. Both burner types discharged high levels of metallic species, but the air atomizing unit had much higher stack emission levels than did the vaporizing pot system. Also, particulate loading levels were an order of magnitude higher for the air atomizing burner than for the vaporizing pot burner when firing the waste oils. However, the vaporizing pot burner generated a waste residue containing the majority of its elemental emissions. Elements which exceeded threshold limit values for one or both heaters were cadmium, chromium, cobalt, copper, iron, lead, nickel, phosphorus, and zinc. However, the nickel and much of chromium appeared to be a sampling artifact caused by the stainless steel sampling system.     

Bacterial community profiles from sediments of the Anacostia River using metabolic and molecular analyses

Background aim and scope  

Though the tidal Anacostia River, a highly polluted riverine system, has been well characterized with regard to contaminants, its overall resident bacterial populations have remained largely unknown. Improving the health of this system will rely upon enhanced understanding of the diversity and functions of these communities. Bacterial DNA was extracted from archived (AR, year 2000) and fresh sediments (RE, year 2006) collected from various locations within the Anacostia River. Using a combination of metabolic and molecular techniques, community snapshots of sediment bacterial diversity and activity were produced.     

Potential Impact of Climate Change on Hurricane Flooding Inundation,Population Affected and Property Damages in Corpus Christi1

Frey, Ashley E., Francisco Olivera, Jennifer L. Irish, Lauren M. Dunkin, James M. Kaihatu, Celso M. Ferreira, and Billy L. Edge, 2010. Potential Impact of Climate Change on Hurricane Flooding Inundation, Population Affected and Property Damages in Corpus Christi. Journal of the American Water Resources Association (JAWRA) 1–11. DOI: 10.1111/j.1752-1688.2010.00475.x Abstract: The effect of climate change on storm-surge flooding and the implications for population and structural damages on the city of Corpus Christi, Texas, was investigated. The study considered the influence of sea level rise and hurricane intensification, both influenced by climate change. Combinations of future carbon dioxide equivalent emission rates and carbon dioxide doubling sensitivities, based on findings of the Intergovernmental Panel on Climate Change, were considered to define future climate scenarios. A suite of physically based numerical models for hurricane winds and the resulting waves, surge, and morphological change at the coast were used to determine flooded areas, population affected, and property damages for Hurricanes Bret, Beulah, and a version of Carla shifted south from its original track, under present and predicted future climate conditions. A comparison of the economic damages for current climate conditions and for the 2080s climate scenario shows that, for Carla (shifted), there will be an increase in the range of $270-1,100 million; for Beulah, of $100-390 million; and, for Bret, of $30-280 million. A similar analysis was also conducted for 2030s predicted climate scenarios. Overall, the comparison of the results for the different climate conditions indicates what the destructive consequences of climate change could be, even within the somewhat short time frame of 80 years considered here.     

ECONOMIC EFFECTS OF RIVER RECREATION ON LOCAL ECONOMIES1

ABSTRACT: Outdoor recreation is a major, growing use of water resources in the United States. The economic effects of expenditures by visitors to three recreational river sites on local economies surrounding the sites were estimated using an input-output model (IMPL.AN). Expenditure data were from the Public Area Recreation Visitors Study (PARVS). Results indicate that visitor spending stimulates a considerable amount of economic activity and growth in local economies. Economic effects include increases in total gross output ranging from $2.6 million to $13.4 million, increases in total income ranging from $1.2 million to $5.6 million, and increases in employment ranging from 60 to 292 jobs.     

Innovation in the minerals industry: Australia in a global context

The pattern of innovation in the global minerals industry is changing as the industry becomes increasingly globalised. In this paper, we look at the structure of innovation in the industry and the drivers of change. We first consider the broad international trends and then examine these more closely with special reference to the Australian industry. Issues addressed include the apparent decline in corporate research and development spending, changing patterns in research collaboration and outsourcing, and the uptake of information and communication technologies in the industry. We also look at the potential implications of these trends for step-change technological developments and at the role of technological innovation in the future development of the industry.     

Sustainability Criteria for Decision Support in the UK Water Industry

The incorporation of sustainability assessment into decision-making processes is a key task for water service providers in the UK and elsewhere. This paper describes the development and application of a set of sustainability criteria, which have been developed and tested with project partners in the UK and Romania. They will be used in a 'guidebook' that will set out a framework to facilitate the inclusion of sustainability in the decision-making process. This work is part of the Sustainable Water Industry Asset Resource Decisions project to develop a multi-criteria analysis decision support system to assist water service providers to assess the relative sustainability of water/wastewater system asset development decisions.     

Development and validation of a method for analysis of "dioxin-like" PCBs in environmental samples from the steel industry

A method, previously used for determination of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), has been modified for quantitative analysis of "dioxin-like" polychlorobiphenyls (PCBs) in environmental samples from the steel industry. The existing sample clean-up procedure, involving liquid chromatography on multi-layered silica and Florisil columns, has been extended to include a third chromatography stage on a basic alumina stationary phase. The additional clean-up stage is required for PCB analysis in order to eliminate interferences from relatively large concentrations of saturated cyclic and aliphatic hydrocarbons. Samples were analysed for WHO-12 congeners using high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) and standard solutions of the method US EPA 1668A. Replicate analysis of method blanks revealed background contamination for PCBs 118, 105 and 77, which are generally abundant in ambient air. These contaminants were taken into account using a subtraction method. The entire procedure was validated by replicate analysis (N = 3) of a certified reference sediment. The RSD for each WHO-12 congener was below 15%, 13C12-labelled PCB internal standard recoveries were in the range 70-95%. A waste dust sample collected in the electrostatic precipitator of a UK sinter plant was analysed for determination of PCDD/Fs and WHO-12 PCBs and exhibited a PCDD/F I-TEQ of 148.5 +/- 21.2 ngkg(-1) and a WHO-TEQ of 7.2 +/- 1.5 ngkg(-1). WHO-12 congeners contributed only 4.6% to the overall TEQ and PCB 126 was the major congener contributing to the WHO-TEQ (96%). The contribution to the overall TEQ of the waste dust sample was mainly attributed to PCDF followed by PCDD, which accounted for 86.6% and 8.7% to the overall TEQ, respectively.