Influence of the secondary motions on pollutant mixing in a meandering open channel flow

This paper presents large eddy simulation of turbulent flow in a meandering open channel with smooth wall and rectangular cross-section. The Reynolds number based on the channel height is 40,000 and the aspect ratio of the cross-section is 4.48. The depth-averaged mean stream-wise velocity agree well to experimental measurements. In this specific case, two interacting cells are formed that swap from one bend to the other. Transport and mixing of a pollutant is analysed using three different positions of release, e.g. on the inner bank, on the outer bank and on the centre of the cross section. The obtained depth-average mean concentration profiles are reasonably consistent with available experimental data. The role of the secondary motions in the mixing processes is the main focus of the discussion. It is found that the mixing when the scalar is released on the centre of the cross-section is stronger and faster than the mixing of the scalar released on the sides. When the position of release is close to a bank side, the mixing is weaker and a clear concentration of scalar close to the corresponding side-wall can be observed in both cases.     

Occurrence of ectoparasitic arthropods associated with rodents in Hail region northern Saudi Arabia

Ectoparasitic arthropods are a diverse element of the Saudi fauna. Due to this, a survey of ectoparasites associated with rodents was conducted as a preliminary study in five districts of Hail region of northern Saudi Arabia for the first time. Ectoparasites extracted from 750 rodents were sampled and identified by recording their frequency of appearance. Results revealed that 1,287 ectoparasites infested 316 of the captured rodent hosts. These ectoparasites parasitized on four species of rodents including three species of rats Rattus rattus rattus, Rattus rattus frugivorus, and Rattus rattus alexandrinus and one species of mouse Acomys dimidiatus (Rodentia: Muridae). The ectoparasites belong to four different groups: ticks, fleas, lice, and mites. Ticks were the highest in the number, while fleas were the lowest among all the extracted ectoparasite groups. The collected ectoparasitic arthropods consisted of seven species. Ticks were of two species: Rhipicephalus turanicus and Rhipicephalus sanguineus (Acari: Ixodidae), fleas were of two species: Xenopsylla cheopis and Xenopsyllus conformis mycerini (Siphonaptera: Pulicidae), lice was a single species: Polyplax serrata (Anoplura: Hoplopleuridae), and mites were of two species: Laelaps nuttali and Laelaps echidninus (Mesostigmata: Laelapidae). The findings of the study showed that the intensity of infestation was varied between rodent host sexes, wherein females had the highest rate of parasitic infestation, and the parasitic index of appearance was very high for one group of parasites (i.e., ticks). The parasitic prevalence was 42.13 % on rodents, and mites were the most prevalent parasite species. Overall, this study was carried out to establish baseline data for ectoparasite-infested rodents in Hail region, Saudi Arabia, and may help for appropriate planning to control zoonotic diseases in this area.     

Radiation modeling of a photo-reactor using a backward ray-tracing method: an insight into indoor photocatalytic oxidation

This article aims to understand the radiation behavior within a photo-reactor, following the ISO 22197-1:2007 standard. The RADIANCE lighting simulation tool, based on the backward ray-tracing modeling method, is employed for a numerical computation of the radiation field. The reflection of the glass cover in the photo-reactor and the test sample influence the amount of irradiance received by the test-sample surface in the photo-reactor setup. The reflection of a white sample limits the irradiance reduction by the glass cover to 1.4 %, but darker samples can lead to an overestimation up to 9.8 % when used in the same setup. This overestimation could introduce considerable error into the interpretation of experiments. Furthermore, this method demonstrates that the kinetics for indoor photocatalytic pollutant degradation can be refined through radiation modeling of the reactor setup. In addition, RADIANCE may aid in future modeling of the more complex indoor environment where radiation affects significantly photocatalytic activity.     

Mechanistic insights into the specificity of human cytosolic sulfotransferase 2A1 (hSULT2A1) for hydroxylated polychlorinated biphenyls through the use of fluoro-tagged probes

Determining the relationships between the structures of substrates and inhibitors and their interactions with drug-metabolizing enzymes is of prime importance in predicting the toxic potential of new and legacy xenobiotics. Traditionally, quantitative structure activity relationship (QSAR) studies are performed with many distinct compounds. Based on the chemical properties of the tested compounds, complex relationships can be established so that models can be developed to predict toxicity of novel compounds. In this study, the use of fluorinated analogues as supplemental QSAR compounds was investigated. Substituting fluorine induces changes in electronic and steric properties of the substrate without substantially changing the chemical backbone of the substrate. In vitro assays were performed using purified human cytosolic sulfotransferase hSULT2A1 as a model enzyme. A mono-hydroxylated polychlorinated biphenyl (4-OH PCB 14) and its four possible mono-fluoro analogues were used as test compounds. Remarkable similarities were found between this approach and previously published QSAR studies for hSULT2A1. Both studies implicate the importance of dipole moment and dihedral angle as being important to PCB structure in respect to being substrates for hSULT2A1. We conclude that mono-fluorinated analogues of a target substrate can be a useful tool to study the structure activity relationships for enzyme specificity.     

Species richness,structure, and conservation of <Emphasis Type="Italic">Nitraria retusa</Emphasis> communities in the coastal salt marshes of Kuwait

Although the coastal salt marshes of Arabian Gulf have been altered extensively by human development activities, there is a paucity of data describing changes in the distribution and abundance of native coastal plant communities. The main objectives of this study are to determine vegetation condition, size structure, and conservation status of Nitraria retusa, a medicinal and salt-tolerant shrub, in disturbed and non-disturbed coastal salt marshes of Kuwait. Size measurements of Nitraria shrubs and nabkas, which are mounds of sediment developed around shrubs, were carried out in 50 quadrats (20 × 20 m²), randomly selected inside and outside Sabah Al-Ahmad Natural Reserve. Species richness and soil properties of nabkas and interspaces, the open areas between the nabkas, were also measured. The results revealed that nabkas of Nitraria in non-disturbed sites are more stable and rich in plant diversity than those in disturbed sites. Mean height and mean canopy diameter of Nitraria shrubs, total plant cover, and species richness are significantly higher in non-disturbed sites than disturbed sites, which indicate the positive influences of conservation for long term on vegetation structure and species richness. The results of soil analyses indicate the important role of nabkas in providing refuges for plant life and species diversity. The present study indicates that more than 50 % of the N. retusa community has been lost during the last few decades. Therefore, N. retusa should be considered an endangered species in Kuwait. The reduction in vegetation cover, a decline in species richness, and the overall degradation of salt marshes are attributed to human development activities along the coast of Kuwait. Effective conservation actions for threatened species in degraded coastal salt marshes of this region include establishment of protective enclosures, prohibitions on development that adversely affects native plant communities, and the planting native salt-tolerant shrubs to facilitate regeneration.     

Foliar nutrient and metal levels of crops in the Mount Cameroon area—reference values for plant nutrition and environmental monitoring

The growing population number and traffic loads, increasing environmental pressures, agricultural intensification, and the establishment of Mount Cameroon National Park demand farsighted environmental management in the region and the definition of a favorable ecological status. Since plants grow in the interface between soils and the atmosphere they can be used as passive biomonitors for the environmental quality. At the same time, the accumulation of nutrients and pollutants in crops is linked to human health, so that foliar elemental levels can be used as an integrative measure for environmental pollution and impact assessment. In the present study, we collected leaf samples of plantain, cassava, cocoyam, and maize on 28 sites at the southern flanks of Mt. Cameroon and determined 20 chemical elements. Air pollution in the study area comes from biomass and waste burning mainly, but emissions from traffic and a large refinery were believed to also play a significant role. However, spatial patterns in foliar elemental concentrations reflected the geochemistry rather than specific sources of pollution. Significant differences in foliar metal and nutrient levels were observed between the four species, indicating a different demand and uptake of specific elements. The results were compared to published data on nutrient concentrations in the tested species and the so-called reference plant. The data can be used as a baseline for future studies in plant nutrition and the environmental monitoring in inner tropical regions where these crops are grown.     

The impact of infield biomass burning on PM levels and its chemical composition

In the South of Italy, it is common for farmers to burn pruning waste from olive trees in spring. In order to evaluate the impact of the biomass burning source on the physical and chemical characteristics of the particulate matter (PM) emitted by these fires, a PM monitoring campaign was carried out in an olive grove. Daily PM10 samples were collected for 1 week, when there were no open fires, and when biomass was being burned, and at two different distances from the fires. Moreover, an optical particle counter and a polycyclic aromatic hydrocarbon (PAH) analyzer were used to measure the high time-resolved dimensional distribution of particles emitted and total PAHs concentrations, respectively. Chemical analysis of PM10 samples identified organic and inorganic components such as PAHs, ions, elements, and carbonaceous fractions (OC, EC). Analysis of the collected data showed the usefulness of organic and inorganic tracer species and of PAH diagnostic ratios for interpreting the impact of biomass fires on PM levels and on its chemical composition. Finally, high time-resolved monitoring of particle numbers and PAH concentrations was performed before, during, and after biomass burning, and these concentrations were seen to be very dependent on factors such as weather conditions, combustion efficiency, and temperature (smoldering versus flaming conditions), and moisture content of the wood burned.     

Carbon fluxes from coarse woody debris in southern taiga forests of the Valdai Upland

Studies in three typical forest biotopes of the Valdai Upland were performed to evaluate the stocks and surface area of coarse woody debris from spruce and birch (in linear transects), its colonization by xylotrophic fungi (during reconnaissance surveys), and CO₂ emission (by a chamber method). The stock and surface area were minimum in a paludal birch forest (46.4 m³/ha and 960 m²/ha) and maximum in a decay area of spruce forest (256.1 m³/ha and 3761 m²/ha, respectively). The assemblages of wood-decay fungi had a composition typically found in southern taiga forests. The total CO₂ flux varied from 145 kg C-CO₂/ha per year in the paludal birch forest to 462 kg C-CO₂/ha per year in small herb–green moss spruce forest. It is concluded that air temperature is an informative predictor of seasonal C-CO₂ flux rate from coarse woody debris.     

Carbonyl compounds and dissolved organic carbon in rainwater of an urban atmosphere

This study investigates the occurrence of carbonyl compounds in rainwater at the city of Thessaloniki, Northern Greece. The concentrations of carbonyl compounds (as sum of 14 compounds) ranged from 21.8 to 592 μg/L, mean concentration 119 μg/L. Formaldehyde, acetaldehyde, hexanal, glyoxal, and methylglyoxal were the dominant compounds. DOC concentrations in rainwater ranged from 0.46 to 21.3 mg/L. UV–Vis and fluorescence spectra characteristics showed variation among rain events. Carbonyl compounds were negatively correlated with temperature exhibited relatively higher concentrations in cold season. They also influenced by storm origin with higher concentrations under terrestrial air masses. Calm conditions enhance the concentrations of DOC. Wash out is an effective removal mechanism of DOC.