LPWCO method for the treatment of high concentrated organic wastewater

Based on wet air oxidation (WAO) and Fenton reagent, thispaper raises a new low pressure wet catalytic oxidation(LPWCO)which requires low pressure for the treatment of highlyconcentrated and refractory organic wastewater. Compared withgeneral wet air oxidation, the pressure of the treatment(0.1-0.6MPa) is only one of tens to percentage of latter(3.5-10MPa). Inaddition, its temperature is no more than 180℃.Compared withFenton reagent, while H2O2/COD(weight ratio) less than 1.2, theremoval of COD in the treatment is over twenty percents more thanFenton's even the value of COD is more than 14000mg/L. In thispaper, we study the effect factor of COD removal and the mechanismof this treatment. The existence of synergistic effect (catalytic oxidation and carbonization) for COD removal in H2SO4-Fenton reagent system under the condition of applied pressure and heating (0.1-0.6MPa, 104-165℃) was verified. The best condition of this disposal are as follows:H2O2/COD(weight ratio)=0.2-1.0, Fe2+ 0.6×10-3 mol, H2SO4 0.5mol, COD>1×104mg/L, the operating pressure is 0.1-0.6MPa and temperature is 104-165℃. This method suit to dispose the high-concentrated refractory wastewater, especially to the wastewater containing H2SO produced in the manufacture of pesticide, dyestuff and petrochemical works.     

区域环评中废水排放量的预测方法研究

阐述了区域环评污染物排放源强的预测原则,对区域开发活动中废水量和COD排放量的预测方法作了详细论述,并以温州滨海新区环评为例作了实证研究.     

稀土酞菁锰对表面活性剂(LAS)的催化氧化性能研究

研究了一种新型含稀土酞菁锰(KCeO2MnPcX)催化剂对水中表面活性剂直链烷基苯磺酸钠(LAS)氧化降解的催化性能,讨论了影响催化氧化反应的各种因素,并确定了最佳反应条件。同时初步探讨了这种催化剂对表面活性剂的催化氧化机理,为处理表面活性剂废水提供了新的途径。     

上海市电动自行车废铅酸电池现状分析及管理对策

分析了上海市电动自行车废铅酸电池产生、回收、处置的现状。阐述了废铅酸电池因不规范回收处置而对环境造成的污染。从产生、处置及管理等方面指出了电动自行车废铅酸电池收集利用体系中存在的问题。提出了上海市管理废铅酸电池的对策、建议。     

Optimization of C/N ratio for preparation of protein-rich and multi-enzymes feed thallus through synergic fermentation of mixed distillers'grains

A new procedure of determining optimal C/N (the rate of carbon source to nitrogen source) of mixed distillers' grains for combined bacteria synergic fermentation is established. At the same time an improved method evaluating bacteria growth, called method of dry cell weighing by filtering is developed. For each combination of C and N , their initial and residual contents before and after fermentation respectively are determined. Then followed the calculation of utilization of C and N sources by the compound bacteria. The optimal C/N is finally located from among the utilization of C and N of several combinations and the weight of produced mass of oven-dried thallus The conditions of fermentation are: inoculum size 10%, temperature 30.0℃, rotational speed 170 r/min, shake culture time 48h. The best results obtained from orthogonal experiments are: maximum mass of oven dried thallus is 14.693g in a liter liquid medium, maximum utilization rate of carbon source is 98.13% and maximum utilization rate of nitrogen is 78.14%. Optimal C/N is 5.1.     

内蒙古发展循环经济的方向与政策初探

本文从内蒙古资源、经济与环境问题现状出发，分析了发展循环经济的必要性、紧迫性和可行性，提出了我区建立循环经济的发展战略应考虑的基本原则，发展方向和法律、政策方面的建议。     

高浓度废水预处理

从分析冲击炼油污水处理的原因出发，阐述了高浓度废水预处理的重要性；重点介绍了三种好氧生物法处理技术；其中ＳＢＲ法由于工程技术日趋成熟，可优先推广应用     

含柠檬酸盐电镀废水的处理

对含柠檬酸盐电镀废水的几种处理方法的比较表明,氯化钡添加法能较好地使柠檬酸盐沉淀,操作简便,处理效果理想,其柠檬酸根离子的去除率达98％以上。     

A metal-OH group modification strategy to prepare highly-hydrophobic MIL-53-Al for efficient acetone capture under humid conditions

A series of highly-hydrophobic MIL-53-Al (MIL = Materials of Institut Lavoisier) frameworks synthesized via decoration of the Al-OH groups by alkyl phosphonic acid were developed as adsorbents for removing acetone from humid gas streams. The newly prepared materials were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), N₂ adsorption-desorption and thermogravimetric analysis (TGA). Their adsorption behaviors toward acetone vapor under dry and wet conditions were studied subsequently. Results showed that alkyl phosphonic acid was successfully grafted into MIL-53-Al skeleton through coordinating interaction with Al³⁺ generating [email protected]_x (x = 12, 14, 18). The [email protected]_x exhibited similar crystal structure and thermal stability to parent MIL-53-Al. Furthermore, the modified materials showed significantly enhanced hydrophobicity. The water vapor uptake of [email protected]₁₄ decreased by 72.55% at 75% relative humidity (RH). Dynamic adsorption experiments demonstrated that water vapor had almost no effect on the acetone adsorption performance of [email protected]₁₄. Under the condition of 90% RH, the acetone adsorption capacity of [email protected]₁₄ was 102.98% higher than that of MIL-53-Al. Notably, [email protected]₁₄ presented excellent adsorption reversibility and regeneration performance in 10 adsorption-desorption cycles. Taken together, the strategy of metal-OH group modification is an attractive way to improve the acetone adsorption performance over metal-organic frameworks (MOFs) under humid conditions. Besides, [email protected]₁₄ would be deemed as a promising candidate for capturing acetone in high moisture environment.     

金属铁还原降解2,4-二硝基甲苯的实验研究

研究了金属铁对2,4-二硝基甲苯(2,4-DNT)的还原降解情况.实验结果表明,2,4-DNT的还原降解与溶液初始pH值、初始浓度和溶解氧等因素有关.氯离子能消除金属铁的钝化现象.金属铁表面附载的铜对2,4-DNT的还原降解具有催化作用.