Climate Change Projections for the United States Midwest

Environmental and societal factors such asair quality, water quality andavailability, land use changes andexpanding urbanization are alreadyaffecting human health and welfare,agriculture, and natural ecosystems in theMidwestern United States. Over thiscentury, these existing stresses willlikely be exacerbated by climate changesresulting from human activities. It isessential that policy decisions aimed atpreserving the well-being of a region beinformed by a good understanding of theregion's climate, how climate might change,and the uncertainties inherent in futureprojections. Recent updates in climatemodeling expertise and an expanded view ofpossible non-intervention emissionscenarios have narrowed the range of changethat can be expected over the Midwestthroughout the next century in some ways,while broadening it in others. In contrastto previous studies, which generallyconsider a mid-range scenario for futureemissions, this study presents the range ofchange that would result from low to highscenarios for climate change. In this waywe account for uncertainties inanthropogenic forcing on climate change inthe region and quantify the potentialeffects of human actions on future climate.This analysis also combines the latestclimate model projections with historicalrecords of observed climate over the pastcentury, effectively placing potentialchanges in extreme event frequencies suchas heavy rainfall events and temperaturethreshold exceedances within the context ofobserved variability over the past century.The purpose of this study is to provide anupdated picture of the potential impacts ofclimate change on the Midwest to inform theimpact assessment and policy developmentcommunity. From the magnitude of thechanges projected by this study, it isclear that these must be included in futurepolicy decisions in order to ensure thesuccessful adaptation and survival ofexisting human and natural systems in theMidwest.     

Community richness and stability in agricultural landscapes: The importance of surrounding habitats

In this paper, the role played by habitat diversity in the landscape on species richness and on the stability of farmland bird communities was investigated. Species richness was estimated on 374 samples monitored in farmland by the French breeding bird survey during the 2001–2005 period. A capture–recapture approach was used to estimate species richness accounting for the variation in detection probability among species of the 100 most common species detected in farmland. Landscape structure and composition were measured both in farmland and in adjacent habitats. The independent effect of each variable on community richness and stability was further assessed using hierarchical variance partitioning and taking spatial autocorrelation into account. A strong matrix effect was detected: non-cropped land deeply influenced richness and stability of bird assemblages.     

Metabolic diversity in epibiotic microflora associated with the Pompeii wormsAlvinella pompejana andA. caudata (Polychaetae: Annelida) from deep-sea hydrothermal vents

Specimens of alvinellid polychaetes (Alvinella pompejana Desbruyères and Laubier, 1980 andA. caudata Desbruyères and Laubier, 1986) and their tubes were sampled from deep-sea hydrothermal vents at 13°N from the manned submersible Nautile during the Hydronaut cruise (October to November 1987) on the East Pacific Rise. Samples were subjected to bacterial analysis aboard the mother ship Nadir to detect bacteria involved in the nitrogen and sulphur cycles, in non-specific heterotrophic processes, and displaying resistance to selected heavy metals. Cultures were incubated at different temperatures under atmospheric and in situ (250 atm) pressures. Bacterial growth was observed in enrichment cultures for most metabolic types screened. Heavy-metal-resistant bacteria were also detected in many samples. No filamentous bacterial form was observed in the cultures. The results demonstrate a high metabolic diversity in episymbiotic flora, indicating that the worm (A. pompejana orA. caudata), its tube and its epiflora represent a complex micro-ecosystem.     

Monolignol biosynthesis and genetic engineering of lignin in trees, a review

This paper summarizes our previous and current research on genetic engineering of lignin biosynthesis for the purposes of improving wood pulping and bleaching efficiency. For these purposes, our targets were to produce transgenic trees with low content of lignin that is also chemically reactive (high lignin S/G ratio). Using aspen as a model species, we have characterized the biochemical functions of various genes and the kinetic properties of these gene products involved in monolignol biosynthetic pathway. The results of these characterizations proved strong evidence for a principle phenolic flux leading to the formation of monolignols. Biochemical evidence further demonstrated that, in this principle flux, 4CL could be the enzyme limiting total lignin accumulation, whereas CAld5H might control the lignin S/G ratio. These propositions were fully supported by the in vivo functions of these enzymes. Transgenic trees with inhibited 4CL enzyme activity exhibited 5–45% reduction in lignin contents. The chemical structure of the resulting lignin remained essentially unchanged. More importantly, the lignin reduction was compensated for by a concomitant increase in cellulose content. When antisense 4CL and sense coniferaldehyde 5-hydroxylase (CAld5H) genes were simultaneously transferred into aspen via Agrobacterium, transgenic trees expressing each one and both of the transgenes were produced. Lignin reductions up to 55% were achieved in antisense 4CL plants and up to 3-fold S/G increases were observed in sense CAld5H plants. These effects were independent but additive, with plants expressing both transgenes having less lignin and higher S/G ratio. Consistent with our previous results, lignin reduction has always resulted in an increase in cellulose content. These transgenics could be potentially valuable for pulp production. But more importantly, these benchmark transgenics are rich sources of information for functional genomics and metabolic engineering, allowing the generation of the ultimate raw materials for wood pulp production.     

Semicontinuous PM2.5 sulfate and nitrate measurements at an urban and a rural location in New York: PMTACS-NY summer 2001 and 2002 campaigns

Several collocated semicontinuous instruments measuring particulate matter with particle sizes < or =2.5 microm (PM2.5) sulfate (SO4(2-)) and nitrate (NO3-) were intercompared during two intensive field campaigns as part of the PM2.5 Technology Assessment and Characterization Study. The summer 2001 urban campaign in Queens, NY, and the summer 2002 rural campaign in upstate New York (Whiteface Mountain) hosted an operation of an Aerosol Mass Spectrometer, Ambient Particulate Sulfate and Nitrate Monitors, a Continuous Ambient Sulfate Monitor, and a Particle-Into-Liquid Sampler with Ion Chromatographs (PILS-IC). These instruments provided near real-time particulate SO4(2-) and NO3- mass concentration data, allowing the study of particulate SO4(2-)/NO3- diurnal patterns and detection of short-term events. Typical particulate SO4(2-) concentrations were comparable at both sites (ranging from 0 to 20 microg/m3), while ambient urban particulate NO3- concentrations ranged from 0 to 11 microg/m3 and rural NO3- concentration was typically less than 1 microg/m3. Results of the intercomparisons of the semicontinuous measurements are presented, as are results of the comparisons between the semicontinuous and time-integrated filter-based measurements. The comparisons at both sites, in most cases, indicated similar performance characteristics. In addition, charge balance calculations, based on major soluble ionic components of atmospheric aerosol from the PILS-IC and the filter measurements, indicated slightly acidic aerosol at both locations.     

Migration of contaminants through the unsaturated zone overlying the Hesbaye chalky aquifer in Belgium: a field investigation

This paper presents the results of a detailed field investigation that was performed for studying groundwater recharge processes and solute downward migration mechanisms prevailing in the unsaturated zone overlying a chalk aquifer in Belgium. Various laboratory measurements were performed on core samples collected during the drilling of boreholes in the experimental site. In the field, experiments consisted of well logging, infiltration tests in the unsaturated zone, pumping tests in the saturated zone and tracer tests in both the saturated and unsaturated zones. Results show that gravitational flows govern groundwater recharge and solute migration mechanisms in the unsaturated zone. In the variably saturated chalk, the migration and retardation of solutes is strongly influenced by recharge conditions. Under intense injection conditions, solutes migrate at high speed along the partially saturated fissures, downward to the saturated zone. At the same time, they are temporarily retarded in the almost immobile water located in the chalk matrix. Under normal recharge conditions, fissures are inactive and solutes migrate slowly through the chalk matrix. Results also show that concentration dynamics in the saturated zone are related to fluctuations of groundwater levels in the aquifer. A conceptual model is proposed to explain the hydrodispersive behaviour of the variably saturated chalk. Finally, the vulnerability of the chalk to contamination issues occurring at the land surface is discussed.     

Chemical valorization of forest and agricultural by-products. Obtention, chemical characteristics, and mechanical behavior of a novel family of hydrophobic films

Esterification of hemicelluloses of the xylan family was performed in order to produce hydrophobic films. Acylation reactions were carried out with lauroyl chloride in the N,N-dimethylacetamide/lithium chloride homogeneous system using 4-dimethylaminopyridine as activator and were induced by microwave irradiation. In the experimental conditions used, 108 and 172% mass ratios were obtained for the dodecyl-grafted xylan and heteroxylan, respectively. The degrees of substitution (DS) were 1.3 (maximum 2) for xylan and 1.2 (maximum 2.1) for heteroxylan. These products were further characterized by FT-IR spectroscopy. The mechanical and thermomechanical behavior of this new family of hydrophobic films were analyzed and compared to those obtained from cellulose with a similar DS by the means of tensile tests. Our results indicate that the dodecyl-grafted xylan film presents the best rigidity-resistance to traction ratio.     

New large solar photocatalytic plant: set-up and preliminary results

A European industrial consortium called SOLARDETOX has been created as the result of an EC-DGXII BRITE-EURAM-III-financed project on solar photocatalytic detoxification of water. The project objective was to develop a simple, efficient and commercially competitive water-treatment technology, based on compound parabolic collectors (CPCs) solar collectors and TiO2 photocatalysis, to make possible easy design and installation. The design, set-up and preliminary results of the main project deliverable, the first European industrial solar detoxification treatment plant, is presented. This plant has been designed for the batch treatment of 2 m3 of water with a 100 m2 collector-aperture area and aqueous aerated suspensions of polycrystalline TiO2 irradiated by sunlight. Fully automatic control reduces operation and maintenance manpower. Plant behaviour has been compared (using dichloroacetic acid and cyanide at 50 mg l(-1) initial concentration as model compounds) with the small CPC pilot plants installed at the Plataforma Solar de Almería several years ago. The first results with high-content cyanide (1 g l(-1)) waste water are presented and plant treatment capacity is calculated.     

Concentrations of dioxin-like PCB congeners in unweathered Aroclors by HRGC/HRMS using EPA Method 1668A

We have determined the congener compositions of nine commercial Aroclor products of polychlorinated biphenyls (PCBs) to the sub-part-per-million level using high-resolution gas chromatography combined with high-resolution mass spectrometry according to US Environmental Protection Agency (EPA) Method 1668A. These Aroclor composition data should allow improved characterization and risk assessment of PCB contamination at hazardous waste sites, particularly for dioxin-like PCB congeners. By combining the data on the concentrations of each dioxin-like congener with its World Health Organization toxicity equivalency factor, we have established dioxin toxic equivalent concentrations for each pure Aroclor product.     

Control targets for the management of biological systems

Attention is focused on biological systems which are describable in terms of ordinary differential equations subject to human control inputs. The concept of an isochronal system is introduced in order to include systems for which the differential equations are valid only over regularly reoccurring time intervals.It is assumed that the control inputs are to be chosen so that an integral cost function of the state of the system, the control used, current time, and the time interval of the control program is minimized. Problems associated with minimizing this cost function over an infinitely long time interval is then considered. Difficulties inherent with minimizing a cost integral on an infinite time interval are shown to be avoided by minimizing an average of the cost function over an unknown but periodic time interval. Under proper circumstance, the optimal control program for the average cost function is either identical to or a good approximation to the optimal control program for the original cost function over an infinitely long time interval.Necessary conditions are obtained for minimizing an average cost function over an unspecified time interval subject to the system equations. For a given problem the necessary conditions will yield but a single system trajectory in the state space. For management purposes this trajectory may be thought of as a target to which the system should be driven and maintained.A number of examples illustrate the use of the necessary conditions to obtain control targets. Certain problems associated with the stability of the target solutions are illustrated with the examples.