Impact of Land Use on Soluble Organic Nitrogen in Soil

Although it has been hypothesized that soluble organic nitrogen (SON) plays a central role in regulating productivity in some terrestrial ecosystems, the factors controlling the size of the SON pool in soil remain poorly understood. Therefore our principal aim in this work was to assess the impact of seven different land use systems (rough and managed grassland, deciduous and coniferous woodland, heathland, wetland and tilled land) on the size of the SON and inorganic N (NO ₃ ^– , NH ₄ ⁺ ) pools in the surface soil layer (0–15 cm). After extraction with deionised water, we found that in most cases the size of the water extractable organic N (WEON) pool was similar in size to the inorganic N pool. In contrast, the KCl extractable organic N (KClEON) pool constituted the dominant form of soluble N in soils under all land uses, perhaps indicating that significant amounts were held on the soil exchange phase. In contrast to inorganic N, which varied significantly with land use, the size of the KClEON and WEON pool was similar for all land uses with the exception of KClEON in tilled land, where significantly lower amounts were observed. We conclude that SON constitutes an important soil N pool in a broad range of land uses, and that its role in microbial N assimilation, plant nutrition and ecosystem responses to atmospheric N deposition warrants further attention. SAFRD, University of Newcastle, Newcastle-upon-Tyne, NE1 7RU, U.K.     

Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

Radiogenic Lead Isotopes and Time Stratigraphy in the Hudson River, New York

Radionuclide, radiogenic lead isotope and trace metal analyses on fine-grained sediment cores collected along 160 km of the upper and tidal Hudson River were used to examine temporal trends of contaminant loadings and to develop radiogenic lead isotopes both as a stratigraphic tool and as tracers for resolving decadal particle transport fluxes. Very large inputs of Cd, Sb, Pb, and Cr are evident in the sediment record, potentially from a single manufacturing facility. The total range in radiogenic lead isotope ratios observed in well-dated cores collected about 24 km downstream of the plant is large (e.g., maximum difference in ²⁰⁶Pb/²⁰⁷Pb is 10%), characterized by four major shifts occurring in the 1950s, 1960s, 1970s and 1980s. The upper Hudson signals in Cd and radiogenic lead isotopes were still evident in sediments collected 160 km downstream in the tidal Hudson. The large magnitude and abrupt shifts in radiogenic lead isotope ratios as a function of depth provide sensitive temporal constraints that complement information derived from radionuclide analyses to significantly improve the precision of dating assignments. Application of a simple dilution model to data from paired cores suggests much larger sediment inputs in one section of the river than previously reported, suggesting particle influxes to the Hudson have been underestimated.     

Measurements of PCB Fluxes into the Atmosphere from a Site Receiving Stabilized Dredged Material

A 50 ha known contaminated site in Bayonne, New Jersey, U.S.A. is permitted to receive up to 3 × 10⁶ m³ of sediment dredged from navigation channels in the New York/New Jersey Harbor. Much of the sediment is expected to contain low to moderate concentrations of industrial and agricultural chemicals, including Polychlorinated Biphenyls (PCBs). The dredged material brought to the site is stabilized with cement and then placed as a capping and grading layer. The flux of PCBs from drying stabilized dredged material has been estimated from measurements of PCB air concentrations at two heights above the ground along with micrometeorological observations. A statistically significant gradient in PCB concentrations has been consistently measured in the first 3 m above the ground. Observed PCB fluxes were highest over freshly placed stabilized dredged sediment and decreased as it cured. The highest flux observed in this study was 7214 ng/m²/h, but during subsequent sampling intervals at the same site, the flux estimates decreased by an order of magnitude over a 5-day interval.     

Assessing the Performance Level of a Water System

Water, Air, &; Soil Pollution: Focus - What should System Managers prefer? Systems that never fail or systems that remain safe during a failure? The present paper tries to give an answer to this...     

Review of in situ remediation technologies for lead,zinc, and cadmium in soil

This article presents a review of in situ technologies for the remediation of soils contaminated with lead, zinc, and/or cadmium. The objective of this review is to assess the developmental status of the available in situ technologies and provide a general summary of typical applications and limitations of these technologies. The literature review identified seven in situ remediation technologies—solidification/stabilization, vitrification, electrokinetic remediation, soil flushing, phytoextraction, phytostabilization, and chemical stabilization. These technologies were considered for their ability to meet a specific set of remediation objectives under a range of conditions. Each of these technologies has both strengths and weaknesses for addressing particular remedial situations discussed in the article for each of the technologies. A general summary of which technologies are most applicable to common remedial scenarios is also provided. © 2004 Wiley Periodicals, Inc.     

Electroremediation: A study of the influence of buffering behavior in contaminated soils

This article presents the results of an experimental study conducted to evaluate the behavior of two types of andisol soils found in Tenerife, Canary Islands, Spain. The soils were evaluated in relation to their buffering capacity when confronted with acid and alkaline fronts generated during electroremediation treatment. The study was conducted using a cell, which established a continuous flow of distilled water through electrode chambers to remove H⁺ and OH^? generated during electrolysis. The results indicate that the soils had sufficient buffer capacity to support variations in pH independent of the maintenance of flow of solution in the electrode chambers. Although the mechanism of migration was not affected, the flow of water favored the movement of ions by diffusion monitoring of the electrolytic current allowed for a real‐time parameter to act as an indicator of the quantity of ions available in regions near the electrodes. © 2004 Wiley Periodicals, Inc.     

How clean is clean enough? Maintaining thermal protective clothing under field conditions in the oil and gas sector.

The purpose of this research was to develop practical care procedures to help maintain the protective quality of flame resistant workwear laundered by workers in the field. Based on observed field conditions, experiments were conducted that simulated domestic laundry procedures. The first experiment involved two flame resistant (FR) fabrics, contaminated or not contaminated with oil. Independent variables also included detergent type and laundry pre-treatment. Other laundry parameters were controlled. Results indicated that it is easier to maintain the FR performance of the FR-treated blend than it is for the aramid fabric. It is hypothesized that energy generated by initial ignition of oil on the specimens triggers the FR mechanism of the treatment, which in turn inhibits further combustion. A second experiment using larger specimens and a domestic washing machine also supported the hypothesized mechanism.     

Towards a model of safety climate measurement.

In this study, a survey instrument was developed to measure safety climate. A review of the scientific literature as well as consultation with an expert panel was used to determine the survey's dimensions. Next, the survey was administered, first as a pilot study (n = 15) and then as a full scale study (n = 229), to employees of the City of Cincinnati Department of Public Works. The psychometric integrity of the survey was assessed according to validity, reliability and utility criteria. Results are presented and discussed.     

Evidence of integration of air quality management in the decision-making processes and procedures of English local government

The air quality management (AQM) framework in the UK is a risk management approach using effects-based objectives for air pollutants to determine the need for action. The Environment Act 1995 required a National Air Quality Strategy to be published, setting out health-based standards and objectives for eight pollutants, of which seven are to managed at a local scale. Because of the variety of sources of air pollution, if the AQM process is to succeed in the long term, solutions to identified problems will be required from transport, land use and economic planning sectors of local government in liaison with various other agencies, regulators and outside bodies. As such the task is inherently multi-disciplinary and an integrated, collaborative approach will be necessary. Although this observation is now fairly well documented, there is still little guidance relating to how, in relation to air quality management, integration can actually be accomplished. This paper presents some observations from case studies undertaken as part of a longer-term research study and in particular focuses on the identified problems of involving non-air-quality professionals in a highly technical scientific process. Various approaches to the collaborative aspects of air quality management will be presented. These case studies represent local authorities of different sizes in different political and organisational situations facing a range of air quality challenges. The creation of project teams or task forces is judged particularly useful for local air quality management. Methods that could be applied more widely include appointing individuals as integrators, and rotation of key personnel.