Determination of radionuclide levels in rainwater using ion exchange resin and γ-spectrometry

The evaluation of radioactivity accidentally released into the atmosphere involves determining the radioactivity levels of rainwater samples. Rainwater scavenges atmospheric airborne radioactivity in such a way that surface contamination can be deduced from rainfall rate and rainwater radioactivity content. For this purpose, rainwater is usually collected in large surface collectors and then measured by γ-spectrometry after such treatments as evaporation or iron hydroxide precipitation. We found that collectors can be adapted to accept large surface (diameter 47 mm) cartridges containing a strongly acidic resin (Dowex AG 88) which is able to quantitatively extract radioactivity from rainwater, even during heavy rainfall. The resin can then be measured by γ-spectrometry. The detection limit is 0.1 Bq per sample of resin (80 g) for ¹³⁷Cs. Natural ⁷Be and ²¹⁰Pb can also be measured and the activity ratio of both radionuclides is comparable with those obtained through iron hydroxide precipitation and air filter measurements. Occasionally ²²Na has also been measured above the detection limit. A comparison between the evaporation method and the resin method demonstrated that 2/3 of ⁷Be can be lost during the evaporation process. The resin method is simple and highly efficient at extracting radioactivity. Because of these great advantages, we anticipate it could replace former rainwater determination methods. Moreover, it does not necessitate the transportation of large rainwater volumes to the laboratory.     

Quantifying disturbance effects on vegetation carbon pools in mountain forests based on historical data

Although the terrestrial carbon budget is of key importance for atmospheric CO₂ concentrations, little is known on the effects of management and natural disturbances on historical carbon stocks at the regional scale. We reconstruct the dynamics of vegetation carbon stocks and flows in forests across the past 100 years for a valley in the eastern Swiss Prealps using quantitative and qualitative information from forest management plans. The excellent quality of the historical information makes it possible to link dynamics in growing stocks with high-resolution time series for natural and anthropogenic disturbances. The results of the historical reconstruction are compared with modelled potential natural vegetation. Forest carbon stock at the beginning of the twentieth century was substantially reduced compared to natural conditions as a result of large scale clearcutting lasting until the late nineteenth century. Recovery of the forests from this unsustainable exploitation and systematic forest management were the main drivers of a strong carbon accumulation during almost the entire twentieth century. In the 1990s two major storm events and subsequent bark beetle infestations significantly reduced stocks back to the levels of the mid-twentieth century. The future potential for further carbon accumulation was found to be strongly limited, as the potential for further forest expansion in this valley is low and forest properties seem to approach equilibrium with the natural disturbance regime. We conclude that consistent long-term observations of carbon stocks and their changes provide rich information on the historical range of variability of forest ecosystems. Such historical information improves our ability to assess future changes in carbon stocks. Further, the information is vital for better parameterization and initialization of dynamic regional scale vegetation models and it provides important background for appropriate management decisions.     

Assessment of in situ biodegradation of monochlorobenzene in contaminated groundwater treated in a constructed wetland

The degradation of monochlorobenzene (MCB) was assessed in a constructed wetland treating MCB contaminated groundwater using a detailed geochemical characterisation, stable isotope composition analysis and in situ microcosm experiments. A correlation between ferrous iron mobilisation, decreasing MCB concentration and enrichment in carbon isotope composition was visible at increasing distance from the inflow point, indicating biodegradation of MCB in the wetland. Additionally, in situ microcosm systems loaded with 13C-labelled MCB were deployed for the first time in sediments to investigate the biotransformation of MCB. Incorporation of 13C-labelled carbon derived from the MCB into bacterial fatty acids substantiated in situ degradation of MCB. The detection of 13C-labelled benzene indicated reductive dehalogenation of MCB. This integrated approach indicated the natural attenuation of the MCB in a wetland system. Further investigations are required to document and optimise the in situ biodegradation of MCB in constructed and natural wetland systems treating contaminated groundwater.     

Structuring sustainability science

It is urgent in science and society to address climate change and other sustainability challenges such as biodiversity loss, deforestation, depletion of marine fish stocks, global ill-health, land degradation, land use change and water scarcity. Sustainability science (SS) is an attempt to bridge the natural and social sciences for seeking creative solutions to these complex challenges. In this article, we propose a research agenda that advances the methodological and theoretical understanding of what SS can be, how it can be pursued and what it can contribute. The key focus is on knowledge structuring. For that purpose, we designed a generic research platform organised as a three-dimensional matrix comprising three components: core themes (scientific understanding, sustainability goals, sustainability pathways); cross-cutting critical and problem-solving approaches; and any combination of the sustainability challenges above. As an example, we insert four sustainability challenges into the matrix (biodiversity loss, climate change, land use changes, water scarcity). Based on the matrix with the four challenges, we discuss three issues for advancing theory and methodology in SS: how new synergies across natural and social sciences can be created; how integrated theories for understanding and responding to complex sustainability issues can be developed; and how theories and concepts in economics, gender studies, geography, political science and sociology can be applied in SS. The generic research platform serves to structure and create new knowledge in SS and is a tool for exploring any set of sustainability challenges. The combined critical and problem-solving approach is essential.     

Vertical emission profiles for Europe based on plume rise calculations

The vertical allocation of emissions has a major impact on results of Chemistry Transport Models. However, in Europe it is still common to use fixed vertical profiles based on rough estimates to determine the emission height of point sources. This publication introduces a set of new vertical profiles for the use in chemistry transport modeling that were created from hourly gridded emissions calculated by the SMOKE for Europe emission model. SMOKE uses plume rise calculations to determine effective emission heights. Out of more than 40 000 different vertical emission profiles 73 have been chosen by means of hierarchical cluster analysis. These profiles show large differences to those currently used in many emission models. Emissions from combustion processes are released in much lower altitudes while those from production processes are allocated to higher altitudes. The profiles have a high temporal and spatial variability which is not represented by currently used profiles.     

Bioremediation of benzene-, MTBE- and ammonia-contaminated groundwater with pilot-scale constructed wetlands

In this pilot-scale constructed wetland (CW) study for treating groundwater contaminated with benzene, MTBE, and ammonia-N, the performance of two types of CWs (a wetland with gravel matrix and a plant root mat) was investigated. Hypothesized stimulative effects of filter material additives (charcoal, iron(III)) on pollutant removal were also tested. Increased contaminant loss was found during summer; the best treatment performance was achieved by the plant root mat. Concentration decrease in the planted gravel filter/plant root mat, respectively, amounted to 81/99% for benzene, 17/82% for MTBE, and 54/41% for ammonia-N at calculated inflow loads of 525/603 mg/m²/d, 97/112 mg/m²/d, and 1167/1342 mg/m²/d for benzene, MTBE, and ammonia-N. Filter additives did not improve contaminant depletion, although sorption processes were observed and elevated iron(II) formation indicated iron reduction. Bacterial and stable isotope analysis provided evidence for microbial benzene degradation in the CW, emphasizing the promising potential of this treatment technique.     

Elemental analysis of printed circuit boards considering the ROHS regulations

The EU RoHS Directive (2002/95/EC of the European Parliament and of the Council) bans the placing of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants on the EU market. It necessitates methods for the evaluation of RoHS compliance of assembled electronic equipment. In this study mounted printed circuit boards from personal computers were analyzed on their content of the three elements Cd, Pb and Hg which were limited by the EU RoHS directive. Main focus of the investigations was the influence of sample pre-treatment on the precision and reproducibility of the results. The sample preparation steps used were based on the guidelines given in EN 62321. Five different types of dissolution procedures were tested on different subsequent steps of sample treatment like cutting and milling. Elemental analysis was carried out using ICP-OES, XRF and CV-AFS (Hg). The results obtained showed that for decision-making with respect to RoHS compliance a size reduction of the material to be analyzed to particles ?1.5 mm can already be sufficient. However, to ensure analytical results with relative standard deviations of less than 20%, as recommended by the EN 62321, a much larger effort for sample processing towards smaller particle sizes might be required which strongly depends on the mass fraction of the element under investigation.     

The influence on the radioxenon background during the temporary suspension of operations of three major medical isotope production facilities in the Northern Hemisphere and during the start-up of another facility in the Southern Hemisphere

Medical isotope production facilities (MIPF) have recently been identified to emit the major part of the environmental radioxenon measured at many globally distributed monitoring sites deployed to strengthen the radionuclide component of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) verification regime. Efforts to raise a global radioxenon emission inventory revealed that the yearly global total emission from MIPF’s is around 15 times higher than the total radioxenon emission from nuclear power plants (NPP's).Given that situation, from mid 2008 until early 2009 two out of the ordinary hemisphere-specific events occured:1) In the Northern hemisphere, a joint temporary suspension of operations of the three largest MIPF's made it possible to quantify the effects of the emissions related to NPP’s. The average activity concentrations of ¹³³Xe measured at a monitoring station close to Freiburg, Germany, went down significantly from 4.5 ± 0.5 mBq/m³ to 1.1 ± 0.1 mBq/m³ and in Stockholm, Sweden, from 2.0 ± 0.4 mBq/m³ to 1.05 ± 0.15 mBq/m³.2) In the Southern hemisphere the only radioxenon-emitting MIPF in Australia started up test production in late November 2008. During eight test runs, up to 6.2 ± 0.2 mBq/m³ of ¹³³Xe was measured at the station in Melbourne, 700 km south-west from the facility, where no radioxenon had been observed before, originating from the isotopic production process.This paper clearly confirms the hypothesis that medical isotope production facility are at present the major emitters of radioxenon to the atmosphere. Suspension of operations of these facilities indicates the scale of their normal contribution to the European radioxenon background, which decreased two to four fold. This also gives a unique opportunity to detect and investigate the influence of other local and long distance sources on the radioxenon background. Finally the opposing effect was studied: the contribution of the start-up of a renewed radiopharmaceutical facility to the build up of a radioxenon background across Australia and the Southern hemisphere.     

Analysis of accumulation, extractability, and metabolization of five different phenylarsenic compounds in plants by ion chromatography with mass spectrometric detection and by atomic emission spectroscopy

Phenylated arsenic compounds occur as highly toxic contaminants in former military areas where they were formed as degradation products of chemical warfare agents. Some phenylarsenic compounds such as roxarsone and aminophenylarsonic acids were applied as food additive and veterinary drugs in stock-breeding and therefore pose an environmental risk in agricultural used sites. Very few data exist in the literature concerning uptake and effects of phenylarsenic compounds in plants growing on contaminated soils. In this study, the accumulation, extractability, and metabolization of five different phenylarsenic compounds, phenylarsonic acid, p- and o-aminophenylarsonic acid, phenylarsine oxide, and 3-nitro-4-hydroxyphenylarsonic acid called roxarsone, by the terrestrial plant Tropaeolum majus were investigated. Ion chromatography coupled to inductively coupled plasma mass spectrometry was used to differentiate these arsenic compounds, and inductively coupled plasma atomic emission spectroscopy was used for total arsenic quantification. All compounds considered were taken up by the roots and transferred to stalks, leaves, and flowers. The strongest accumulation was observed for unsubstituted phenylarsonic acid followed by its trivalent analogue phenylarsine oxide that was mostly oxidized in soil whereas the amino- or nitro- and hydroxy-substituted phenylarsonic acids were accumulated to a smaller degree.The highest extraction yield of 90% for ground leaf material was achieved by 0.1 M phosphate buffer, pH 7.7, in a two-step extraction with a total extraction time of 24 h. The extraction of higher amounts of arsenic (50–70% of total arsenic present in leaves depending on arsenic species application) from non-ground intact leaves with deionized water in comparison with the buffer (20–40% of total arsenic) is ascribed to osmotic effects. The arsenic species analysis revealed a cleavage of the amino groups from the phenyl ring for plants treated with aminophenylarsonic acids. A further important metabolic effect consisted in the production of inorganic arsenate and arsenite from the phenylated arsonic acid groups.     

Endocrine modulation and toxic effects of two commonly used UV screens on the aquatic invertebrates Potamopyrgus antipodarum and Lumbriculus variegatus

The two UV screens 3-benzylidene-camphor (3-BC) and 3-(4'-methylbenzylidene)-camphor (4-MBC) were tested regarding their toxicity and estrogenic activity. The Yeast Estrogen Screen (YES) and two sediment assays with the freshwater invertebrates Lumbriculus variegatus and Potamopyrgus antipodarum were performed. In the YES, both substances activated the human estrogen receptor alpha with EC50 values of 44.2 microM for 3-BC and 44.3 microM for 4-MBC, whereby 4-MBC attained only 8% of the maximal response of 17beta-estradiol. For P. antipodarum embryo production increased after exposure to both substances (EC50 of 4.60 microM 4-MBC=1.17 mg kg(-1)dw) while mortality increased at high concentrations. The reproduction of L. variegatus was decreased by 3-BC with an EC50 of 5.95 microM (=1.43 mg kg(-1)dw) and also by 4-MBC, where no EC50 could be calculated. While reproduction decreased, the worms' weight increased after exposure to 3-BC with an EC50 of 26.9 microM (=6.46 mg kg(-1) dw), hence the total biomass remained unaffected.