Bioremediation of benzene-, MTBE- and ammonia-contaminated groundwater with pilot-scale constructed wetlands

In this pilot-scale constructed wetland (CW) study for treating groundwater contaminated with benzene, MTBE, and ammonia-N, the performance of two types of CWs (a wetland with gravel matrix and a plant root mat) was investigated. Hypothesized stimulative effects of filter material additives (charcoal, iron(III)) on pollutant removal were also tested. Increased contaminant loss was found during summer; the best treatment performance was achieved by the plant root mat. Concentration decrease in the planted gravel filter/plant root mat, respectively, amounted to 81/99% for benzene, 17/82% for MTBE, and 54/41% for ammonia-N at calculated inflow loads of 525/603 mg/m²/d, 97/112 mg/m²/d, and 1167/1342 mg/m²/d for benzene, MTBE, and ammonia-N. Filter additives did not improve contaminant depletion, although sorption processes were observed and elevated iron(II) formation indicated iron reduction. Bacterial and stable isotope analysis provided evidence for microbial benzene degradation in the CW, emphasizing the promising potential of this treatment technique.     

Monitoring of genetically modified Escherichia coli in laboratory wastewater

Containment of genetically modified (GM) microorganisms such as Escherichia coli is a legal requirement to protect the environment from an unintended release and to avoid horizontal gene transfer (HGT) of recombinant DNA to native bacteria. In this study, we sampled the laboratory wastewater (LWW) at a large Swiss university from three sources over 2 years and cultured ampicillin-resistant, presumptive GM E. coli. From a total of 285 samples, 127 contained presumptive GM E. coli (45%) at a mean concentration of 2.8 × 10² CFU/ml. Plasmid DNA of 11 unique clones was partially or entirely sequenced. All consisted of cloning vectors harboring research-specific inserts. To estimate the chance of HGT between GM E. coli and native bacteria in LWW, we identified taxa representative for the bacterial community in LWW using 16S rRNA amplicon sequencing and measured conjugation frequencies of E. coli with five LWW isolates. At optimal conjugation conditions, frequencies were between 3.4 × 10⁻³ and 2.4 × 10⁻⁵. Given the absence of transferable broad-host range plasmids and suboptimal conjugation conditions in the LWW system, we conclude that the chance of HGT is relatively low. Still, this study shows that the implementation of robust containment measures is key to avoid the escape of GM microorganisms.

     

Restoration planning to guide Aichi targets in a megadiverse country

Ecological restoration has become an important strategy to conserve biodiversity and ecosystems services. To restore 15% of degraded ecosystems as stipulated by the Convention on Biological Diversity Aichi target 15, we developed a prioritization framework to identify potential priority sites for restoration in Mexico, a megadiverse country. We used the most current biological and environmental data on Mexico to assess areas of biological importance and restoration feasibility at national scale and engaged stakeholders and experts throughout the process. We integrated 8 criteria into 2 components (i.e., biological importance and restoration feasibility) in a spatial multicriteria analysis and generated 11 scenarios to test the effect of assigning different component weights. The priority restoration sites were distributed across all terrestrial ecosystems of Mexico; 64.1% were in degraded natural vegetation and 6% were in protected areas. Our results provide a spatial guide to where restoration could enhance the persistence of species of conservation concern and vulnerable ecosystems while maximizing the likelihood of restoration success. Such spatial prioritization is a first step in informing policy makers and restoration planners where to focus local and large‐scale restoration efforts, which should additionally incorporate social and monetary cost–benefit considerations.     

Deforestation and cattle expansion in the Paraguayan Chaco 1987–2012

Regional Environmental Change - The dry forests of Latin America are among the most dynamic deforestation frontiers in the world and are important carbon and biodiversity reservoirs. Our knowledge...     

Elemental analysis of printed circuit boards considering the ROHS regulations

The EU RoHS Directive (2002/95/EC of the European Parliament and of the Council) bans the placing of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants on the EU market. It necessitates methods for the evaluation of RoHS compliance of assembled electronic equipment. In this study mounted printed circuit boards from personal computers were analyzed on their content of the three elements Cd, Pb and Hg which were limited by the EU RoHS directive. Main focus of the investigations was the influence of sample pre-treatment on the precision and reproducibility of the results. The sample preparation steps used were based on the guidelines given in EN 62321. Five different types of dissolution procedures were tested on different subsequent steps of sample treatment like cutting and milling. Elemental analysis was carried out using ICP-OES, XRF and CV-AFS (Hg). The results obtained showed that for decision-making with respect to RoHS compliance a size reduction of the material to be analyzed to particles ?1.5 mm can already be sufficient. However, to ensure analytical results with relative standard deviations of less than 20%, as recommended by the EN 62321, a much larger effort for sample processing towards smaller particle sizes might be required which strongly depends on the mass fraction of the element under investigation.     

Vertical emission profiles for Europe based on plume rise calculations

The vertical allocation of emissions has a major impact on results of Chemistry Transport Models. However, in Europe it is still common to use fixed vertical profiles based on rough estimates to determine the emission height of point sources. This publication introduces a set of new vertical profiles for the use in chemistry transport modeling that were created from hourly gridded emissions calculated by the SMOKE for Europe emission model. SMOKE uses plume rise calculations to determine effective emission heights. Out of more than 40 000 different vertical emission profiles 73 have been chosen by means of hierarchical cluster analysis. These profiles show large differences to those currently used in many emission models. Emissions from combustion processes are released in much lower altitudes while those from production processes are allocated to higher altitudes. The profiles have a high temporal and spatial variability which is not represented by currently used profiles.     

Structuring sustainability science

It is urgent in science and society to address climate change and other sustainability challenges such as biodiversity loss, deforestation, depletion of marine fish stocks, global ill-health, land degradation, land use change and water scarcity. Sustainability science (SS) is an attempt to bridge the natural and social sciences for seeking creative solutions to these complex challenges. In this article, we propose a research agenda that advances the methodological and theoretical understanding of what SS can be, how it can be pursued and what it can contribute. The key focus is on knowledge structuring. For that purpose, we designed a generic research platform organised as a three-dimensional matrix comprising three components: core themes (scientific understanding, sustainability goals, sustainability pathways); cross-cutting critical and problem-solving approaches; and any combination of the sustainability challenges above. As an example, we insert four sustainability challenges into the matrix (biodiversity loss, climate change, land use changes, water scarcity). Based on the matrix with the four challenges, we discuss three issues for advancing theory and methodology in SS: how new synergies across natural and social sciences can be created; how integrated theories for understanding and responding to complex sustainability issues can be developed; and how theories and concepts in economics, gender studies, geography, political science and sociology can be applied in SS. The generic research platform serves to structure and create new knowledge in SS and is a tool for exploring any set of sustainability challenges. The combined critical and problem-solving approach is essential.     

Natural alkalinity generation in neutral lakes affected by acid mine drainage

Lakes in surface mining areas are often subject to continuous loads of acid mine drainage. The knowledge of internal alkalinity generation in a lake is necessary to predict if the lake will stay circumneutral or may acidify. The most important processes of alkalinity production in lakes are sulfate reduction, denitrification, and the burial of N in the sediment. By summarizing data from the literature, we present probable rates of these different processes in circumneutral mining lakes. The critical acidity load that can probably be compensated for by internal processes, is 5.09 mmol(-) m(-2) d(-1) in productive lakes and 0.50 mmol(-) m(-2) d(-1) in less productive lakes. Under the assumption that methanogenesis is inhibited by high sulfate concentrations, the highest probable acidity loads in such lakes are 6.85 mmol(-) m(-2) d(-1) and 1.06 mmol(-) m(-2) d(-1), respectively. Denitrification, sulfate reduction, and N burial contributed significantly to total alkalinity production. Sulfate reduction had the largest potential. However, existing models cannot predict alkalinity generation from sulfate concentrations alone because the long-term stability of reduced S compounds in the sediment is crucial for a sustainable biological alkalinity generation. The larger acid-neutralizing potential of higher trophic lakes is caused both by higher rates of microbial activity and by a greater stability of reduced reaction products in the sediment. The largest uncertainties in our knowledge with respect to the total alkalinity budget are related to microbial processes in sulfate-rich freshwater lakes and the long-term stability of reduced reaction products in the sediment.     

Incorporation of plant carbon into the soil animal food web of an arable system

We used stable isotopes to examine the incorporation of plant carbon into the belowground food web of an agricultural system. Plots were established and planted with maize (Zea mays) in a rye field (Secale cereale) near G?ttingen (northern Germany) in May 1999. In October 1999, April 2000, and October 2000, meso- and macrofauna and maize and rye litter were collected in each plot and analyzed for 13C and 15N content. 15N signatures suggested that the soil animal species analyzed span three trophic levels with the trophic position of species varying little in time. The species investigated formed a continuum from primary to secondary decomposers to predators. On average, predator species differed from primary and secondary decomposers by 3.9 sigma15N suggesting that they fed on a mixed diet of both decomposer groups. The combined analysis of 13C and 15N signatures allowed us to identify links between prey and consumer species. In October 1999, shortly after maize residues had been incorporated into the plots, maize-born carbon was present in each of the animal species investigated, including top predators. The incorporation of maize carbon into the belowground food web increased during the following 12 months but the concentration of maize-born carbon never exceeded 50% in any of the species. Furthermore, the ranks of the incorporation of maize-born carbon of the species changed little. The results suggest that the belowground food web relies heavily on carbon originating from plant residues from before the recent two growing seasons. In most species the amount of maize-born carbon increased continuously; however, in some species it decreased during winter, suggesting that these species switched to a diet based more on C3 plants during winter, or predominantly metabolized carbon incorporated during the last growing season. The study documents that the combined analysis of 13C and 15N signatures in soil invertebrate species, after replacement of C3 by C4 plants, is a powerful tool to better understand the structure of the belowground food web and the flux of carbon through it.