Sorption of Perfluorooctane sulfonate（PFOS） including its isomers on hydrargillite as a function of pH,humic substances and Na2SO4

Perfluorooctane sulfonate（PFOS） is a persistent organic pollutant（POP） and emergent contaminant that are widespread in the environment. Understanding the mechanisms controlling the distribution of PFOS and its isomers between hydrargillite and the water phase is important in order to study their redistribution and mobility in the environment. This study investigated the effects of pH, humic acid, fulvic acid and Na₂SO₄ on sorption of PFOS isomers to hydrargillite. A mixture...     

Larval alarm pheromones as a potential control for invasive cane toads (Bufo marinus) in tropical Australia

Novel approaches to control invasive species are urgently needed. Cane toads (Bufo marinus) are large, highly toxic anurans that are spreading rapidly through tropical Australia. Injured toad larvae produce an alarm pheromone that elicits rapid avoidance by conspecifics but not by frog larvae. Experiments in outdoor ponds show that repeated exposure to the pheromone reduced toad tadpole survival rates (by >50%) and body mass at metamorphosis (by 20%). The alarm pheromone did not induce tadpoles to seek shelter, but accelerated ontogenetic differentiation. Perhaps reflecting mortality of weaker individuals during larval life, growth rates post-metamorphosis were higher in animals emerging from the pheromone exposure treatment than from the control treatment. Nonetheless, body size differentials established at metamorphosis persisted through the first 8 days of post-metamorphic life. We will need substantial additional research before evaluating whether the alarm pheromone provides a way to reduce cane toad recruitment in nature, but our field trials are encouraging in this respect.     

Projecting Regional Patterns of Future Soil Chemistry Status in Swedish Forests using SAFE

As part of the Abatement Strategies for Transboundary Air Pollution (ASTA) research program, the dynamic soil chemistry model SAFE was used to make hindcasts and future projections of soil solution chemistry for 645 Swedish forest soils between 1800 and 2100. The data needed were derived from different databases of different spatial resolution ranging from site-specific measurements of soil and stand characteristics from the Swedish Forest Inventory to species-specific nutrient content ranges based on literature surveys. The time-series of nutrient uptake and atmospheric deposition needed were created using the MAKEDEP model and the future scenarios were based on the 1999 Gothenburg protocol. The version of MAKEDEP used included nutrient content elasticity, and the modelled biomass nutrient content thus varies between regions as well as over time. The results were analysed by dividing the sites into three different regions (southwest, central and north) as well as nationally. It was shown that acidification remains a severe environmental problem in the southwest region even after implementation of the 1999 Gothenburg protocol, whereas in the north the problem is far less pronounced.     

Riparian Zone Influence on Stream Water Dissolved Organic Carbon Concentrations at the Swedish Integrated Monitoring Sites

Short-term variability in stream water dissolved organic carbon (DOC) concentrations is controlled by hydrology, climate and atmospheric deposition. Using the Riparian flow-concentration Integration Model (RIM), we evaluated factors controlling stream water DOC in the Swedish Integrated Monitoring (IM) catchments by separating out hydrological effects on stream DOC dynamics. Model residuals were correlated with climate and deposition-related drivers. DOC was most strongly correlated to water flow in the northern catchment (Gammtratten). The southern Aneboda and Kindla catchments had pronounced seasonal DOC signals, which correlated weakly to flow. DOC concentrations at Gårdsjön increased, potentially in response to declining acid deposition. Soil temperature correlated strongly with model residuals at all sites. Incorporating soil temperature in RIM improved model performance substantially (20–62% lower median absolute error). According to the simulations, the RIM conceptualization of riparian processes explains between 36% (Kindla) and 61% (Aneboda) of the DOC dynamics at the IM sites.     

Trace element partitioning in ashes from boilers firing pure wood or mixtures of solid waste with respect to fuel composition,chlorine content and temperature

Trace element partitioning in solid waste (household waste, industrial waste, waste wood chips and waste mixtures) incineration residues was investigated. Samples of fly ash and bottom ash were collected from six incineration facilities across Sweden including two grate fired and four fluidized bed incinerators, to have a variation in the input fuel composition (from pure biofuel to mixture of waste) and different temperature boiler conditions. As trace element concentrations in the input waste at the same facilities have already been analyzed, the present study focuses on the concentration of trace elements in the waste fuel, their distribution in the incineration residues with respect to chlorine content of waste and combustion temperature.Results indicate that Zn, Cu and Pb are dominating trace elements in the waste fuel. Highly volatile elements mercury and cadmium are mainly found in fly ash in all cases; 2/3 of lead also end up in fly ash while Zn, As and Sb show a large variation in distribution with most of them residing in the fly ash. Lithophilic elements such as copper and chromium are mainly found in bottom ash from grate fired facilities while partition mostly into fly ash from fluidized bed incinerators, especially for plants fuelled by waste wood or ordinary wood chips. There is no specific correlation between input concentration of an element in the waste fuel and fraction partitioned to fly ash. Temperature and chlorine content have significant effects on partitioning characteristics by increasing the formation and vaporization of highly volatile metal chlorides. Zinc and cadmium concentrations in fly ash increase with the incineration temperature.     

Multiple system modelling of waste management

Due to increased environmental awareness, planning and performance of waste management has become more and more complex. Therefore waste management has early been subject to different types of modelling. Another field with long experience of modelling and systems perspective is energy systems. The two modelling traditions have developed side by side, but so far there are very few attempts to combine them. Waste management systems can be linked together with energy systems through incineration plants. The models for waste management can be modelled on a quite detailed level whereas surrounding systems are modelled in a more simplistic way. This is a problem, as previous studies have shown that assumptions on the surrounding system often tend to be important for the conclusions. In this paper it is shown how two models, one for the district heating system (MARTES) and another one for the waste management system (ORWARE), can be linked together. The strengths and weaknesses with model linking are discussed when compared to simplistic assumptions on effects in the energy and waste management systems. It is concluded that the linking of models will provide a more complete, correct and credible picture of the consequences of different simultaneous changes in the systems. The linking procedure is easy to perform and also leads to activation of project partners. However, the simulation procedure is a bit more complicated and calls for the ability to run both models.     

On the Calculation and Interpretation of Target Load Functions

In this study critical load functions and target load functions of nitrogen and sulphur deposition with respect to acidity and minimum base cation to aluminium ratio were calculated with the SAFE model using three different averaging strategies: (1) averaging based on current forest generation, (2) averaging based on next generation and (3) averaging based on the entire simulation period. From the results it is evident that although target load calculation and indeed critical load calculation is straight forward, there is a problem in translating a predicted recovery according to the target load calculation back to a site-specific condition. We conclude that a policy strategy for emission reductions that ensures recovery, according to calculated target load functions, is likely to be beneficial from an ecosystem point of view. However, such a strategy may not be sufficient to achieve actual non-violation of the chemical criteria throughout the seasonal or rotational variations. To address this issue we propose a method for calculating dynamic critical loads which ensures that the chosen criteria is not violated.     

Traffic emission factors of ultrafine particles: effects from ambient air

Ultrafine particles have a significant detrimental effect on both human health and climate. In order to abate this problem, it is necessary to identify the sources of ultrafine particles. A parameterisation method is presented for estimating the levels of traffic-emitted ultrafine particles in terms of variables describing the ambient conditions. The method is versatile and could easily be applied to similar datasets in other environments. The data used were collected during a four-week period in February 2005, in Gothenburg, as part of the G?te-2005 campaign. The specific variables tested were temperature (T), relative humidity (RH), carbon monoxide concentration (CO), and the concentration of particles up to 10 μm diameter (PM(10)); all indicators are of importance for aerosol processes such as coagulation and gas-particle partitioning. These variables were selected because of their direct effect on aerosol processes (T and RH) or as proxies for aerosol surface area (CO and PM(10)) and because of their availability in local monitoring programmes, increasing the usability of the parameterization. Emission factors are presented for 10-100 nm particles (ultrafine particles; EF(ufp)), for 10-40 nm particles (EF(10-40)), and for 40-100 nm particles (EF(40-100)). For EF(40-100) no effect of ambient conditions was found. The emission factor equations are calculated based on an emission factor for NO(x) of 1 g km(-1), thus the particle emission factors are easily expressed in units of particles per gram of NO(x) emitted. For 10-100 nm particles the emission factor is EF(ufp) = 1.8×10(15)×(1 - 0.095×CO - 3.2×10(-3)×T) particles km(-1). Alternative equations for the EFs in terms of T and PM(10) concentration are also presented.     

Integration studies on a two-stage fermentation process for the production of biohydrogen

Fermentation of biomass residues and second generation biomasses is potentially a way to enable a sustainable production of hydrogen. Simulation models which calculate mass and energy balances, developed with Aspen Plus^®, are used to integrate the process steps necessary to produce pure hydrogen from biomass in a 2-stage fermentation process. Process and heat integration are introduced to reduce the high water and heat demand of the process, connected to the low substrate concentrations in the involved process streams. The results show that the recirculation of process effluents, together with the use of properly designed heat exchangers, can reduce the water and heat demand up to 90% from a non-integrated process, but is also subject to restrictions due to an increase in osmolality in the system.     

The usage of safety management tools in Swedish municipalities

Although municipalities clearly deal with a broad range of safety issues, little is known about their safety management practices and their usage of safety management tools across sectors. In order to open up the municipal safety management toolbox, this study explores which tools that are being used in Swedish municipalities and by which municipal sector. Our results indicate that tools such as risk inventory, safety rounds and risk analysis are broadly used across most sectors, while usage of other tools is more restricted to certain sectors. Legislative requirements, tool characteristics and actual needs are assumed to influence the usage of tools. Further research in this field is needed for better adaption of safety management tools to municipal needs.